Draft Snap Center/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "=== Описание === Привязывается к центру дуг и кругов.")
Line 8: Line 8:
|SeeAlso=}}
|SeeAlso=}}


===Description===
=== Описание ===
Привязывается к центру дуг и кругов.
Snaps to the the center point of arcs and circles.


===Use===
===Use===

Revision as of 13:55, 26 November 2018

Draft Center

Системное название
Draft Center
Расположение в меню
Черчение → Привязка → Центр
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Привязывается к центру дуг и кругов.

Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near one the arc/circle/circular edge you wish to attach your element to
  4. Below on the right side of the cursor the symbol of the snap mode will appear
  5. Click to attach your element to the selected endpoint of target element

Will also work with Draft Move and Draft Rotate.

Notes

Snap mode can be used with

  • sketcher elements (arcs, circles)
  • draft elements (arcs, circles)
  • edge of circular face of shape
  • edge of circular face of solid

Clicking on the snap-mode icon will toggle the snap mode on/off.