Draft Angle

From FreeCAD Documentation
Revision as of 20:36, 2 August 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Angle

Системное название
Draft Angle
Расположение в меню
Черчение → Привязка → Углы
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

Snaps to the special cardinal points of circles and arcs, at 45° and 90°.

Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near one of the cardinal point you wish to attach your element to
  4. Below on the right side of the cursor the symbol of the snap mode will appear
  5. Click to attach your element to the selected endpoint of target element

Will also work with Draft Move and Draft Rotate.

Notes

Snap mode can be used with

  • sketcher elements (arcs, circles)
  • draft elements (arcs, circles)
  • edge of circular face of shape
  • edge of circular face of solid

Clicking on the snap-mode icon will toggle the snap mode on/off.