Draft Snap/cs: Difference between revisions
(Created page with "Kreslení Uchopit") |
(Created page with "Uchopování znamená "přilepení" následujících 3D bodu k existujícímu bodu. Uchopování je dostupné u většiny nástrojů v Kreslení a [[Arch...") |
||
Line 1: | Line 1: | ||
Uchopování znamená "přilepení" následujících 3D bodu k existujícímu bodu. Uchopování je dostupné u většiny nástrojů v [[Draft Module/cs|Kreslení]] a |
|||
Snapping means "gluing" your next 3d point onto an existing point. Snapping is available with most [[Draft Module|Draft]] and [[Arch Module|Arch]] tools, and can be enabled and disabled globally with the [[#Options|Draft ToggleSnap]] command. Each snap location below can also be enabled or disabled individually by clicking the corresponding button on the snap toolbar. |
|||
[[Arch Module/cs|Architektuře]] a může být globálně zakázkáno nebo povoleno příkazem [[#Options|Kreslení Přepínač uchopování]] |
|||
[[Image:Draft_Snap_example.jpg]] |
[[Image:Draft_Snap_example.jpg]] |
Revision as of 10:55, 3 March 2014
Uchopování znamená "přilepení" následujících 3D bodu k existujícímu bodu. Uchopování je dostupné u většiny nástrojů v Kreslení a
Architektuře a může být globálně zakázkáno nebo povoleno příkazem Kreslení Přepínač uchopování
Available snap locations
- File:Snap Angle.png Angle: the special cardinal points of circles and arcs, at 45° and 90°
- File:Snap Center.png Center: the center point of arcs and circles
- File:Snap Endpoint.png Endpoint: the endpoints of line, arc and spline segments
- File:Snap Extension.png Extension: on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap
- File:Snap Grid.png Grid: the nodes of the Draft grid, if visible.
- File:Snap Intersection.png Intersection: the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps
- File:Snap Midpoint.png Midpoint: the middle point of line and arc segments
- File:Snap Near.png Near: the closest point on the nearest object
- File:Snap Ortho.png Ortho: on imaginary lines that cross the last point, and extend at 0°, 45° and 90°
- File:Snap Parallel.png Parallel: on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap
- File:Snap Perpendicular.png Perpendicular: on line and arc segments, perpendicularly to the latest point
Options
- File:Snap Lock.png Lock: turns snapping on/off globally
- Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
- Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
- Pressing L while drawing locks the current angle of the line segment being drawn.
- The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.