Draft Slope/ru

From FreeCAD Documentation
Revision as of 10:53, 17 November 2016 by Baritone (talk | contribs) (Created page with "{{GuiCommand/ru |Name=Draft Slope |Name/ru=Draft Slope |Workbenches=Draft, Arch |MenuLocation=Черчение → Утилиты → Se...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Draft Slope

Системное название
Draft Slope
Расположение в меню
Черчение → Утилиты → Set Slope
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

This tool allows to set the slope (vertical horizontal) of selected wires or lines. By setting a slope value, all vertices after the first one will have their Z value changed so the different segments of the wires or lines will have the given inclination.

The slope value is a tangential value: 0 means horizontal, 1 means 45 degrees upwards, -1 means 45 degrees downwards, 0.577 means 30 degrees up, etc.

How to use

  1. Select one or more Wire or Line objects
  2. Select menu Draft -> Utilities -> File:Draft Slope.png Set Slope
  3. Set the desired value in the Slope task panel box
  4. Press the OK button