Draft Slope/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Draft Slope")
 
mNo edit summary
Line 1: Line 1:
{{GuiCommand|Name=Draft Slope|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]|MenuLocation=Draft → Utilities → Set Slope|SeeAlso=}}
{{GuiCommand|Name=Draft Slope|Name/fr=Draft Slope|Workbenches=[[Draft Module/fr|Draft]], [[Arch Module/fr|Arch]]|MenuLocation=Draft → Utilities → Set Slope|SeeAlso=}}


==Description==
==Description==

Revision as of 18:33, 3 May 2018

Draft Slope

Menu location
Draft → Utilities → Set Slope
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool allows to set the slope (vertical horizontal) of selected wires or lines. By setting a slope value, all vertices after the first one will have their Z value changed so the different segments of the wires or lines will have the given inclination.

The slope value is a tangential value: 0 means horizontal, 1 means 45 degrees upwards, -1 means 45 degrees downwards, 0.577 means 30 degrees up, etc.

How to use

  1. Select one or more Wire or Line objects
  2. Select menu Draft -> Utilities -> File:Draft Slope.png Set Slope
  3. Set the desired value in the Slope task panel box
  4. Press the OK button