Draft SelectPlane/ro: Difference between revisions
No edit summary |
(Updating to match new version of source page) |
||
Line 32: | Line 32: | ||
* Nici unul, caz în care planul de lucru este adaptat automat la vizualizarea curentă atunci când porniți o comandă sau la o față dacă începeți să desenați pe o față existentă. |
* Nici unul, caz în care planul de lucru este adaptat automat la vizualizarea curentă atunci când porniți o comandă sau la o față dacă începeți să desenați pe o față existentă. |
||
</div> |
</div> |
||
{{Version|0.22}}: For each 3D view a separate working plane is stored. |
|||
[[Image:WorkingPlane_example.png|400px]] |
[[Image:WorkingPlane_example.png|400px]] |
||
Line 41: | Line 43: | ||
#* Select a single object. The following objects are supported: |
#* Select a single object. The following objects are supported: |
||
#** [[Draft_WorkingPlaneProxy|Draft WorkingPlaneProxies]]: the {{PropertyView|View Data}} (the camera position) and the {{PropertyView|Visibility Map}} (the saved visibility of objects) of the working plane proxy are also restored. |
#** [[Draft_WorkingPlaneProxy|Draft WorkingPlaneProxies]]: the {{PropertyView|View Data}} (the camera position) and the {{PropertyView|Visibility Map}} (the saved visibility of objects) of the working plane proxy are also restored. |
||
#** [[ |
#** [[Arch_Axis|Arch Axes]] ({{Version|0.22}}) |
||
#** [[ |
#** [[Arch_AxisSystem|Arch AxisSystems]] ({{Version|0.22}}) |
||
#** [[Arch_BuildingPart|Arch BuildingParts]] |
|||
#** [[Arch_SectionPlane|Arch SectionPlanes]] |
|||
#** [[Std_Part|Std Parts]]: to avoid selecting subelements it is advisable to select these in the [[Tree_view|Tree view]]. |
#** [[Std_Part|Std Parts]]: to avoid selecting subelements it is advisable to select these in the [[Tree_view|Tree view]]. |
||
#** |
#** Non-solid objects that consist of a single flat face or a single curved edge, or ({{Version|0.22}}) that have three or more vertices. |
||
#** |
#** Solid objects or objects without a shape that have a {{PropertyData|Placement}} property. ({{Version|0.22}}) |
||
#* Select one or more subelements. You can select: |
#* Select one or more subelements. You can select: |
||
#** A flat face. |
#** A flat face. |
||
⚫ | |||
#** Three vertices. |
#** Three vertices. |
||
#** An edge and a vertex, or two edges. The combined vertices must define a plane. ({{Version|0.22}}) |
|||
⚫ | |||
#** Two straight edges that are co-planar but not co-linear. |
|||
#** A straight edge and a vertex that does not lie on the (extended) edge. |
|||
# There are several ways to invoke the command: |
# There are several ways to invoke the command: |
||
#* Press the {{Button|[[Image:Draft_SelectPlane.svg|16px]] [[Draft_SelectPlane|Draft SelectPlane]]}} button in the [[Draft_Tray|Draft Tray]]. Depending on the current working plane this button can look different. |
#* Press the {{Button|[[Image:Draft_SelectPlane.svg|16px]] [[Draft_SelectPlane|Draft SelectPlane]]}} button in the [[Draft_Tray|Draft Tray]]. Depending on the current working plane this button can look different. |
Revision as of 13:36, 24 October 2023
Draft SelectPlane |
poziția meniului |
---|
Draft → Utilities → Select Plane |
Ateliere |
Draft, Arch |
scurtătură |
W P |
Prezentat în versiune |
- |
A se vedea, de asemenea, |
Draft SetWorkingPlaneProxy |
Description
Descriere
Modulul Draft dispune de un sistem de plan de lucru, care vă permite să specificați un plan personalizat în spațiul 3D pe care va apărea următoarea comandă Draft. Există mai multe metode pentru a defini planul de lucru:
- De pe o fațetă selectată
- De la 3 noduri selectate
- Din vizualizarea curentă
- De la o presetare: de sus, frontal sau lateral
- Nici unul, caz în care planul de lucru este adaptat automat la vizualizarea curentă atunci când porniți o comandă sau la o față dacă începeți să desenați pe o față existentă.
introduced in version 0.22: For each 3D view a separate working plane is stored.
Shapes created on different working planes
Usage with pre-selection
- Do one of the following:
- Select a single object. The following objects are supported:
- Draft WorkingPlaneProxies: the VizualizareView Data (the camera position) and the VizualizareVisibility Map (the saved visibility of objects) of the working plane proxy are also restored.
- Arch Axes (introduced in version 0.22)
- Arch AxisSystems (introduced in version 0.22)
- Arch BuildingParts
- Arch SectionPlanes
- Std Parts: to avoid selecting subelements it is advisable to select these in the Tree view.
- Non-solid objects that consist of a single flat face or a single curved edge, or (introduced in version 0.22) that have three or more vertices.
- Solid objects or objects without a shape that have a DatePlacement property. (introduced in version 0.22)
- Select one or more subelements. You can select:
- A flat face.
- A curved edge.
- Three vertices.
- An edge and a vertex, or two edges. The combined vertices must define a plane. (introduced in version 0.22)
- Select a single object. The following objects are supported:
- There are several ways to invoke the command:
- Press the Draft SelectPlane button in the Draft Tray. Depending on the current working plane this button can look different.
- Select the Utilities → Select Plane option from the menu.
- Use the keyboard shortcut: W then P.
- The working plane and the button in the Draft Tray are updated.
Usage with post-selection
- There are several ways to invoke the command:
- Press the Draft SelectPlane button in the Draft Tray. Depending on the current working plane this button can look different.
- Select the Utilities → Select Plane option from the menu.
- Use the keyboard shortcut: W then P.
- The Working plane setup task panel opens. See Options for more information.
- Do one of the following:
- Select a single object. See the previous paragraph for the supported objects.
- Select one or more subelements. You can select:
- A flat face.
- Three vertices.
- Click anywhere in the 3D view to confirm the selection and finish the command.
- The working plane and the button in the Draft Tray are updated.
Usage with presets
- There are several ways to invoke the command:
- Press the Draft SelectPlane button in the Draft Tray. Depending on the current working plane this button can look different.
- Select the Utilities → Select Plane option from the menu.
- Use the keyboard shortcut: W then P.
- The Working plane setup task panel opens. See Options for more information.
- Press any of the buttons to finish the command.
- The working plane and the button in the Draft Tray are updated.
Options
Opțiuni
- Pentru a seta planul de lucru la geometria existentă: selectați o fațetă a unui obiect existent în vizualizarea 3D sau introduced in version 0.17, cu CTRL apăsat, 3 vârfuri pe orice obiect. Apoi apăsați tasta SelectPlane
- Apăsarea butonului VIEW va stabili planul de lucru drept planul de vizualizare, perpendicular pe axa camerei și trecând prin punctul de origine (0,0,0).
- Apăsarea butonului AUTO va decupla orice plan de lucru curent. Următoarele operații 2D vor fi dependente de vizualizare.
- De asemenea, puteți specifica o valoare de offset, care vă va stabili planul de lucru la o anumită distanță de planul pe care îl selectați.
- Puteți să ascundeți și să arătați grila cu comanda rapidă G R
Notes
- It can be useful to align the 3D view with the selected Draft working plane. For example after switching the working plane to Front you may want to switch to the Front view as well.
- The grid can be toggled with the Draft ToggleGrid command.
- By double-clicking Draft WorkingPlaneProxies in the Tree view you can quickly switch between working planes.
Preferences
See also: Preferences Editor and Draft Preferences.
- The grid settings in the task panel as well as several other grid settings are available as preferences: Edit → Preferences... → Draft → Grid and snapping → Grid.
- To use the grid the Edit → Preferences... → Draft → Grid and snapping → Grid → Use grid option must be selected. After changing this preference you must restart FreeCAD.
- The Snapping radius can also be changed on-the-fly (see Draft Snap) or by changing: Tools → Edit parameters... → BaseApp → Preferences → Mod → Draft → snapRange.
Scripting
Script
Obiectul plan de lucru poate fi ușor creat și manipulat în scripturi și în macros. Puteți crea propriele dvs. planuri de lucru și le puteți folosi independent de planul curent de lucru curent.
De asemenea, puteți accesa planul curent de lucru al Draft-ului actual:
# This code only works if the Draft Workbench is active!
import FreeCAD as App
import FreeCADGui as Gui
workplane = App.DraftWorkingPlane
v1 = App.Vector(0, 0, 0)
v2 = App.Vector(1, 1, 1).normalize()
workplane.alignToPointAndAxis(v1, v2, 17)
Gui.Snapper.toggleGrid()
Gui.Snapper.toggleGrid()
Exempluː
import WorkingPlane
my_plane = WorkingPlane.plane()
v1 = App.Vector(0, 0, 0)
v2 = App.Vector(1, 1, 1).normalize()
my_plane.alignToPointAndAxis(v1, v2, 17)
projection = my_plane.projectPoint(App.Vector(10, 15, 2))
print(projection)
Draft
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub