Kreslení Mnohoúhelníku
Draft Polygon |
Umístění Menu |
---|
Draft -> Polygon |
Pracovní stoly |
Kreslení, Architektura |
Výchozí zástupce |
P G |
Představen ve verzi |
- |
Viz také |
Nikdo |
Description
Popis
Nástroj Mnohoúhelník vytváří pravidelný mnohoúhelník zadáním 2 bodů, střed a druhý bod definující poloměr. Použije se tloušťka čáry a barva předem zadaná v záložce Nástrojů.
Usage
Použití
- Stiskněte tlačítko Mnohoúhelník nebo klávesy P a potom G
- Klikněte na první bod ve 3D pohledu nebo zadejte jeho souřadnice pro určení středu
- V dialogovém okně voleb zadejte počet stran,
- Klikněte na další bod ve 3D pohledu nebo zadejte hodnotu definující poloměr mnohoúhelníku. Mnohoúhelník je také povrchem, i když se jeví jako drátový model.
The polygon can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the center and radius points to a new position.
The polygon is created inscribed in a circle of the specified radius; it can be switched to circumscribed after creation by changing its draw mode property.
The number of sides of the polygon can also be changed after creation by changing its faces number property.
Volby
- Pro zadání souřadnic ručně, jednoduše zadejte číslo a stiskněte ENTER mezi každou z komponent X, Y a Z.
- Stiskněte klávesu T nebo klikněte/odklikněte zaklikávací políčko Pokračovat. Je-li nastaven pokračovací mód, nástroj Mnohoúhelník bude po ukončení mnohoúhelníka restartován a připraven ke kreslení dalšího mnohoúhelníka bez nutnosti znovu jej spouštět klikáním na tlačítko Mnohoúhelník.
- Stiskněte při kreslení klávesu CTRL pro přichycení Vašeho bodu k nejbližšímu uchopovacímu místu, nezávisle na vzdálenosti od něho.
- Stiskněte při kreslení klávesu SHIFT pro nastavení vazby Vašeho dalšího bodu vodorovně nebo svisle v relaci k předchozímu bodu.
- Stisknutím klávesy I nebo tlačítka Filled zajistíte, že se mnohoúhelník tváří jako plocha (musí být uzavřená). Jednoduše se to nastavuje Pohled->Vlastnost Mnohoúhelník na "Otevřené čáry" nebo "Drátový model", toto také může být snadno změněno později.
- Stiskněte klávesu ESC nebo tlačítko Cancel pro ukončení aktuálního příkazu.
Vlastnosti
- ÚdajePoloměr: Poloměr definiční kružnice
- ÚdajeKreslicí mód: Specifikuje jestli je mnohoúhelník vepsaný nebo opsaný definiční kruřnici
- ÚdajePočet stran: Počet stran mnohoúhelníka
- ÚdajePoloměr zaoblení: Specifikuje poloměr zaoblení v rozích mnohoúhelníka
Data
- ÚdajeRadius: specifies the radius of the circle that defines the polygon.
- ÚdajeDraw Mode: specifies if the polygon is inscribed in a circle, or circumscribed around a circle.
- ÚdajeFaces Number: specifies the number of sides of the polygon.
- ÚdajeChamfer Size: specifies the size of the chamfers (straight segments) created on the corners of the polygon.
- ÚdajeFillet Radius: specifies the radius of the fillets (arc segments) created on the corners of the polygon.
- ÚdajeMake Face: specifies if the shape makes a face or not. If it is
true
a face is created, otherwise only the perimeter is considered part of the object.
View
- PohledPattern: specifies a Draft Pattern with which to fill the face of the polygon. This property only works if ÚdajeMake Face is
true
, and if PohledDisplay Mode is "Flat Lines". - PohledPattern Size: specifies the size of the Draft Pattern.
Skriptování
Nástroj Mnohoúhelník může být využit v makrech a z konzoly Pythonu použitím následující funkce:
The Polygon tool can be used in macros and from the Python console by using the following function:
Polygon = makePolygon(nfaces, radius=1, inscribed=True, placement=None, face=None, support=None)
- Vytvoří objekt mnohoúhelník se zadaným počtem stran a poloměrem.
- Je-li inscribed False, mnohoúhelník je opsán kolem kružnice s daným poloměrem. Jinak je vepsán dovnitř kružnice.
- Je-li face True, výsledný tvar je zobrazen jako povrch, jinak jako drátový model.
- Výstupem je nově vytvořený objekt.
Příklad:
import FreeCAD, Draft
Polygon1 = Draft.makePolygon(4, radius=500)
Polygon2 = Draft.makePolygon(5, radius=750)
ZAxis = FreeCAD.Vector(0, 0, 1)
p3 = FreeCAD.Vector(1000, 1000, 0)
place3 = FreeCAD.Placement(p3, FreeCAD.Rotation(ZAxis, 90))
Polygon3 = Draft.makePolygon(6, radius=1450, placement=place3)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub