Draft: Serie polare
Serie polare |
Posizione nel menu |
---|
Draft → Serie polare |
Ambiente |
Draft |
Avvio veloce |
Nessuno |
Introdotto nella versione |
0.19 |
Vedere anche |
Serie, Serie circolare, Serie su tracciato, Serie su punti, Clone |
Descrizione
Lo strumento Serie polare crea una serie da un oggetto selezionato posizionando le copie lungo una circonferenza.
Questo strumento può essere utilizzato su forme 2D create con Draft ma può anche essere utilizzato su molti tipi di oggetti 3D come quelli creati con Part o PartDesign.
Per posizionare le copie in una griglia rettangolare utilizzare Serie. Per posizionarle in un modello circolare utilizzare Serie circolare. Per posizionare le copie lungo un percorso utilizzare Serie su tracciato. Per posizionare le copie in punti specificati usare Serie su punti; per creare copie o cloni e posizionarli manualmente usare Sposta, Ruota, e Clona.
Una serie polare di un oggetto.
Utilizzo
- Selezionare un oggetto da cui si desidera creare la matrice polare.
- Premere il pulsante Serie polare. Se non viene selezionato alcun oggetto, si aprirà il pannello azioni, ma è comunque necessario selezionare un oggetto per procedere.
- Scegli l'angolo polare, che determina dove sarà posizionato l'ultimo elemento della serie.
- Scegliere il numero di elementi della serie. Minimo 2, massimo 99.
- Scegliere il centro dell'asse di rotazione. È possibile fare clic nella vista 3D, per impostare contemporaneamente la posizione del centro di rotazione e completare il comando.
- Facoltativamente, attivare le opzioni di fusione o link.
- Premere OK per completare il comando.
Note:
- Per impostazione predefinita, l'asse di rotazione è l'asse Z positivo
(0, 0, 1)
. Questo può essere modificato nelleditor delle proprietà dopo la creazione dell'oggetto. - L'angolo polare è positivo in senso antiorario e negativo in senso orario.
- Ogni elemento della serie è un clone esatto dell'oggetto originale, ma l'intera serie è considerata una singola unità in termini di proprietà e aspetto.
- Questo comando crea lo stesso oggetto di quello creato con gli strumenti Serie e Serie circolare. Pertanto, la serie può essere convertita in ortogonale, polare o circolare semplicemente modificandone le proprietà.
Opzioni
- Press Reset point to set the center of rotation to the origin
(0, 0, 0)
. - If the Fuse checkbox is ticked, the resulting objects in the array will be fused into a single shape, if they touch or intersect each other.
- If the Use Links checkbox is ticked, the resulting objects in the array will be App Links instead of simple copies. This improves the memory usage of the array, as the App Link re-uses the shape of the original object, and does not create new shapes. If this option is used, the Fuse checkbox has no effect.
- Press Esc or the Cancel button to abort the current command.
Proprietà
An Array object is based on Part Feature (Part::Feature
class), and thus shares all properties of the latter. In addition to the properties listed in Part Feature, the Array object has additional properties.
See the OrthoArray tool for the complete information.
Script
See also: Draft API and FreeCAD Scripting Basics.
The Array tool can be used in macros and from the Python console by using the following function.
array_list = make_polar_array(obj, center, angle, number, use_link)
- Creates an array from the objects contained in
obj
, which can be a single object or a list of objects. - The value of
center
is a vector that defines the center of the array circle;angle
is the angle of the arc in degrees, andnumber
is the number of copies in the polar pattern, including the original object. - If
use_link
istrue
the created copies will be App Links and not regular copies. array_list
is returned with the new copies.array_list
is either a single object or a list of objects, depending on the inputobj
.
Esempio:
import FreeCAD as App
import Draft
import draftobjects.polararray as pa
doc = App.newDocument()
tri = Draft.makePolygon(3, 600)
center = App.Vector(-1600, 0, 0)
arr = pa.make_polar_array(tri, center, 270, 8)
App.ActiveDocument.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub