Draft PathArray: Difference between revisions
(Fuse property added. PR13191.) |
(V0.22 -> V1.0) |
||
Line 133: | Line 133: | ||
* {{PropertyData|Count|Integer}}: specifies the number of elements in the array. |
* {{PropertyData|Count|Integer}}: specifies the number of elements in the array. |
||
* {{PropertyData|Expand Array|Bool}}: specifies whether to expand the array in the [[Tree_view|Tree view]] to enable the selection of its individual elements. Only available for Link arrays. |
* {{PropertyData|Expand Array|Bool}}: specifies whether to expand the array in the [[Tree_view|Tree view]] to enable the selection of its individual elements. Only available for Link arrays. |
||
* {{PropertyData|Fuse|Bool}}: specifies if overlapping elements in the array are fused or not. Not used for Link arrays. {{Version| |
* {{PropertyData|Fuse|Bool}}: specifies if overlapping elements in the array are fused or not. Not used for Link arrays. {{Version|1.0}} |
||
* {{PropertyData|Path Object|LinkGlobal}}: specifies the object to be used for the path. It must contain {{Value|Edges}} in its [[Part_TopoShape|Part TopoShape]]. |
* {{PropertyData|Path Object|LinkGlobal}}: specifies the object to be used for the path. It must contain {{Value|Edges}} in its [[Part_TopoShape|Part TopoShape]]. |
||
* {{PropertyData|Path Subelements|LinkSubListGlobal}}: specifies a list of edges of the {{PropertyData|Path Object}}. If supplied only these edges are used for the path. |
* {{PropertyData|Path Subelements|LinkSubListGlobal}}: specifies a list of edges of the {{PropertyData|Path Object}}. If supplied only these edges are used for the path. |
Latest revision as of 09:49, 21 April 2024
|
Menu location |
---|
Modification → Array tools → Path array |
Workbenches |
Draft, Arch |
Default shortcut |
None |
Introduced in version |
0.14 |
See also |
Draft OrthoArray, Draft PolarArray, Draft CircularArray, Draft PathLinkArray, Draft PointArray, Draft PointLinkArray |
Description
The Draft PathArray command creates a regular array from a selected object by placing copies along a path. Use the Draft PathLinkArray command to create a more efficient Link array instead. Except for the type of array that is created, Link array or regular array, the Draft PathLinkArray command is identical to this command.
Both commands can be used on 2D objects created with the Draft Workbench or Sketcher Workbench, but also on many 3D objects such as those created with the Part Workbench, PartDesign Workbench or Arch Workbench.
Draft PathArray
Usage
- Select the object you wish to array.
- Add the path object to the selection. It is also possible to select edges instead. The edges must belong to the same object and they must be connected.
- There are several ways to invoke the command:
- Press the
Path array button.
- Select the Modification → Array tools →
Path array option from the menu.
- Press the
- The array is created.
- Optionally change the properties of the array in the Property editor.
Alignment
The alignment of the elements in a Draft PathArray depends on the properties of the array and the orientation of the source object. The position of the source object is ignored: for the purpose of the array the x
, y
and z
are set to 0
. If the DataAlign property of the array is set to false
the orientation of the array elements is identical to that of the source object. If it is set to true
the X axis of the local coordinate system of each element placement is tangent to the path. The Y and Z axes of the local coordinate systems depend on the DataAlign Mode property of the array. Other array properties involved in the alignment include DataTangent Vector, DataForce Vertical and DataVertical Vector.
3 arrays based on the same non-planar path. From left to right: Align is false, Align is true with Align Mode Original and Align is true with Align Mode Frenet
.
Align Mode
Three modes are available:
Original
This mode comes closest to the single DataAlign Mode available in version 0.18. It relies on a fixed normal vector. If the path is planar this vector is perpendicular to the plane of the path, else a default vector, the positive Z axis, is used. From this normal vector and the local tangent vector (the local X axis) a cross product is calculated. This new vector is used as the local Z axis. The orientation of the local Y axis is determined from the local X and Z axes.
Frenet
This mode uses the local normal vector derived from the path at each element placement. If this vector cannot be determined (for example in the case of a straight segment) a default vector, again the positive Z axis, is used instead. With this vector and the local tangent vector the local coordinate system is determined using the same procedure as in the previous paragraph.
Tangent
This mode is similar to DataAlign Mode Original
but includes the possibility to pre-rotate the source object by specifying a DataTangent Vector.
Force Vertical and Vertical Vector
These properties are only available if DataAlign Mode is Original
or Tangent
. If DataForce Vertical is set to true
the local coordinate system is calculated in a different manner. The DataVertical Vector is used as a fixed normal vector. From this normal vector and the local tangent vector (the local X axis) again a cross product is calculated. But now this vector is used as the local Y axis. The orientation of the local Z axis is determined from the local X and Y axes.
Using these properties can be required if one of the edged of the path is (almost) parallel to the default normal of the path.
Properties
See also: Property editor.
A Draft PathArray object is derived from a Part Feature object and inherits all its properties (with the exception of some View properties that are not inherited by Link arrays). The following properties are additional unless otherwise stated:
Data
Link
The properties in this group are only available for Link arrays. See Std LinkMake for more information.
- DataScale (
Float
) - Data (Hidden)Scale Vector (
Vector
) - DataScale List (
VectorList
) - Data (Hidden)Visibility List (
BoolList
) - Data (Hidden)Placement List (
PlacementList
) - Data (Hidden)Element List (
LinkList
) - Data (Hidden)_ Link Touched (
Bool
) - Data (Hidden)_ Child Cache (
LinkList
) - Data (Hidden)Colored Elements (
LinkSubHidden
) - DataLink Transform (
Bool
)
Alignment
- DataAlign (
Bool
): specifies if the elements in the array are aligned along the path or not. If it isfalse
all other properties in this group, except DataExtra Translation, do not apply and are hidden. - DataAlign Mode (
Enumeration
): specifies the align mode, which can beOriginal
,Frenet
orTangent
. - DataEnd Offset (
Length
): specifies the length from the end of the path to the last copy. Must be smaller than the length of the path minus the DataStart Offset. introduced in version 0.21 - DataExtra Translation (
VectorDistance
): specifies an additional displacement for each element along the path. - DataForce Vertical (
Bool
): specifies whether to override the default normal direction with the value of DataVertical Vector. Only used if DataAlign Mode isOriginal
orTangent
. - DataStart Offset (
Length
): specifies the length from the start of the path to the first copy. Must be smaller than the length of the path. introduced in version 0.21 - DataTangent Vector (
Vector
): specifies the alignment vector. Only used if DataAlign Mode isTangent
. - DataVertical Vector (
Vector
): specifies the override for the default normal direction. Only used if DataVertical Vector istrue
.
Objects
- DataBase (
LinkGlobal
): specifies the object to duplicate in the array. - DataCount (
Integer
): specifies the number of elements in the array. - DataExpand Array (
Bool
): specifies whether to expand the array in the Tree view to enable the selection of its individual elements. Only available for Link arrays. - DataFuse (
Bool
): specifies if overlapping elements in the array are fused or not. Not used for Link arrays. introduced in version 1.0 - DataPath Object (
LinkGlobal
): specifies the object to be used for the path. It must containEdges
in its Part TopoShape. - DataPath Subelements (
LinkSubListGlobal
): specifies a list of edges of the DataPath Object. If supplied only these edges are used for the path.
View
Link
The properties in this group, with the exception of the inherited property, are only available for Link arrays. See Std LinkMake for more information.
- ViewDraw Style (
Enumeration
) - ViewLine Width (
FloatConstraint
) - ViewOverride Material (
Bool
) - ViewPoint Size (
FloatConstraint
) - ViewSelectable (
Bool
): this is an inherited property that appears in the Selection group for other arrays - ViewShape Material (
Material
)
Base
The properties in this group, with the exception of the inherited property, are only available for Link arrays. See Std LinkMake for more information.
- View (Hidden)Child View Provider (
PersistentObject
) - View (Hidden)Material List (
MaterialList
) - View (Hidden)Override Color List (
ColorList
) - View (Hidden)Override Material List (
BoolList
) - View (Hidden)Proxy (
PythonObject
): this is an inherited property.
Display Options
The properties in this group are inherited properties. See Part Feature for more information.
- ViewBounding Box (
Bool
): this property is not inherited by Link arrays. - ViewDisplay Mode (
Enumeration
): for Link arrays it can beLink
orChildView
. For other arrays it can be:Flat Lines
,Shaded
,Wireframe
orPoints
- ViewShow In Tree (
Bool
) - ViewVisibility (
Bool
)
Draft
- ViewPattern (
Enumeration
): not used. - ViewPattern Size (
Float
): not used.
Object style
The properties in this group are not inherited by Link arrays.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To create a path array use the make_path_array
method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makePathArray
method.
path_array = make_path_array(base_object, path_object,
count=4, extra=App.Vector(0, 0, 0), subelements=None,
align=False, align_mode="Original", tan_vector=App.Vector(1, 0, 0),
force_vertical=False, vertical_vector=App.Vector(0, 0, 1),
use_link=True)
base_object
is the object to be arrayed. It can also be theLabel
(string) of an object in the current document.path_object
is the path object. It can also be theLabel
(string) of an object in the current document.count
is the number of elements in the array.extra
is a vector that displaces each element.subelements
is a list of edges ofpath_object
, for example["Edge1", "Edge2"]
. If supplied only these edges are used for the path.- If
align
isTrue
the elements are aligned along the path depending on the value ofalign_mode
, which can be"Original"
,"Frenet"
or"Tangent"
. tan_vector
is a unit vector that defines the local tangent direction of the elements along the path. It is used whenalign_mode
is"Tangent"
.- If
force_vertical
isTrue
vertical_vector
is used for the local Z direction of the elements along the path. It is used whenalign_mode
is"Original"
or"Tangent"
. - If
use_link
isTrue
the created elements are App Links instead of regular copies. path_array
is returned with the created array object.
Example:
import FreeCAD as App
import Draft
doc = App.newDocument()
p1 = App.Vector(500, -1000, 0)
p2 = App.Vector(1500, 1000, 0)
p3 = App.Vector(3000, 500, 0)
p4 = App.Vector(4500, 100, 0)
spline = Draft.make_bspline([p1, p2, p3, p4])
obj = Draft.make_polygon(3, 500)
path_array = Draft.make_path_array(obj, spline, 6)
doc.recompute()
wire = Draft.make_wire([p1, -p2, -p3, -p4])
path_array2 = Draft.make_path_array(obj, wire, count=3, extra=App.Vector(0, -500, 0), subelements=["Edge2", "Edge3"], align=True, force_vertical=True)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub