Draft Spiegeln
Entwurf Spiegeln |
Menüeintrag |
---|
Änderung → Spiegeln |
Arbeitsbereich |
Entwurf, Architektur |
Standardtastenkürzel |
M I |
Eingeführt in Version |
- |
Siehe auch |
Entwurf Klonen |
Beschreibung
Das Entwurf Spiegel Werkzeug erstellt eine gespiegelte Kopie eines ausgewählten Objekts mit der Operation Teil Spiegel. Die Kopie ist, genau wie ein Entwurf Klon, mit dem Originalobjekt verknüpft. Das bedeutet, wenn das Originalobjekt seine Form und Eigenschaften ändert, ändert sich auch die gespiegelte Form.
Das Spiegel Werkzeug kann auf 2D Formen angewendet werden, die mit dem [[Draft Workbench/de|Entwurf Arbeitsbereich] erstellt wurden, kann aber auch auf vielen Arten von 3D Objekten, wie sie mit der Part Arbeitsbereich, PartDesign Arbeitsbereich] oder Arch Arbeitsbereichen angewendet werden.
Gespiegeltes Objekt, das unter Verwendung einer Spiegellinie erstellt wurde.
Anwendung
See also: Draft Snap and Draft Constrain.
- Wähle ein Objekt aus, das du spiegeln möchtest.
- Drücke die 16px Entwurf spiegel Taste. Wenn kein Objekt ausgewählt ist, wirst du aufgefordert, eines auszuwählen.
- Klicke auf einen ersten Punkt in der 3D Ansicht, oder gib eine Koordinate ein und drücke die Punkt hinzufügen Schaltfläche.
- Klicke auf einen zweiten Punkt in der 3D Ansicht, oder gib eine Koordinate ein und drücken Sie die Taste Punkt hinzufügen Schaltfläche. Diese Punkte legen eine Linie fest, die zusammen mit der Kameraansicht eine Spiegelebene definiert, die zum Erstellen des gespiegelten Objekts verwendet wird.
Options
The single character keyboard shortcuts mentioned here can be changed. See Draft Preferences.
- To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
- Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first point, else they are relative to the coordinate system origin.
- Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
- The Continue checkbox has no purpose for this command.
- The Modify subelements checkbox has no purpose for this command.
- Press S to switch Draft snapping on or off.
- Press Esc or the Close button to abort the command.
Notes
- Mirrored copies of Draft Lines, Draft Wires, Draft Arcs and Draft Circles can be turned into independent editable Draft objects by using Draft Downgrade and then Draft Upgrade.
- The Part SimpleCopy command can be used to create a copy of a mirrored object that is not linked to its source object.
Preferences
See also: Preferences Editor and Draft Preferences.
- To change the number of decimals used for the input of coordinates: Edit → Preferences... → General → Units → Units settings → Number of decimals.
Properties
See also: Property editor.
A Part Mirror object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Base
- DatenSource (
Link
): specifies the object that is mirrored.
Plane
- DatenBase (
Vector
): specifies the base point of the mirror plane. - DatenNormal (
Vector
): specifies the normal direction of the mirror plane.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To mirror objects use the mirror
method of the Draft module.
mirrored_list = mirror(objlist, p1, p2)
objlist
contains the objects to be mirrored. It is either a single object or a list of objects.p1
is the first point of the mirror plane.p2
is the second point of the mirror plane.- If the Draft working plane is available the alignment of the mirror plane is determined by its normal, else the view direction of the camera in the active 3D view is used. If the graphical interface is not available the Z axis is used.
mirrored_list
is returned with the newPart::Mirroring
objects. It is either a single object or a list of objects, depending onobjlist
.
Beispiel:
import FreeCAD as App
import Draft
doc = App.newDocument()
place = App.Placement(FreeCAD.Vector(1000, 0, 0), App.Rotation())
polygon1 = Draft.make_polygon(3, 750)
polygon2 = Draft.make_polygon(5, 750, placement=place)
p1 = App.Vector(2000, -1000, 0)
p2 = App.Vector(2000, 1000, 0)
line1 = Draft.make_line(p1, p2)
mirrored1 = Draft.mirror(polygon1, p1, p2)
Line2 = Draft.make_line(-p1, -p2)
mirrored2 = Draft.mirror([polygon1, polygon2], -p1, -p2)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework