Draft: Linie
Draft Line |
poziția meniului |
---|
Draft → Line |
Ateliere |
Draft, Arch |
scurtătură |
L I |
Prezentat în versiune |
- |
A se vedea, de asemenea, |
Draft Wire |
Description
Descriere
Instrumentul Linie creează o linie dreaptă, definită prin două puncte. Ea utilizează Draft Linestyle definită în bara de instrumente Draft. Instrumentul Linie se comportă exact ca instrumentul Draft Wire , cu excepția faptului că se oprește după două puncte.
Usage
Cum se utilizează
- Apăsați butonul Draft Line sau apăsați tastele L apoi I
- Faceți clic pe un prim punct din vizualizarea 3D sau tastați un coordinate
- Faceți clic pe un al doilea punct din vizualizarea 3D sau tastați un coordinate
The line can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the points to a new position.
Fusing single lines
If several connected Draft Lines are selected they can be fused into a wire by pressing the Draft Upgrade tool; however, this wire will not be editable. To create an editable wire, use Draft Upgrade three more times on the new shapes (wire, closed wire, face). You can also fuse the original lines with the Draft Wire tool.
Note: A wire can also be created from a single line by adding another point anywhere along its length. To do this, press the add point button, and click anywhere on the line.
Opțiuni
- Apăsați X, Y sau Z după primul punct pentru a restrânge al doilea punct de pe axa dată.
- Pentru a introduce manual coordonatele, pur și simplu introduceți numerele, apoi apăsați ENTER între fiecare componentă X, Y și Z.
- Apăsați tasta R sau faceți clic pe caseta de selectare pentru a bifa/debifa butonul Relativ. Dacă modul relativ este activ, coordonatele celui de-al doilea punct sunt relative la prima. Dacă nu, ele sunt absolute, luate din punctul de origine (0,0,0).
- Apăsați tasta T sau faceți clic pe caseta de selectare pentru a bifa/debifa butonul Continue. Dacă modul continuat este activat, instrumentul Linie se va reporni după ce dați cel de-al doilea punct, permițându-vă să desenați un alt segment de linie fără a apăsa din nou butonul Linie.
- Apăsați CTRL în timp ce desenați pentru a forța ancorarea snapping punctul dvs. către cea mai apropiată locație, independent de distanța.
- Apăsați SHIFT în timp ce desenați constrain al doilea punct pe orizontală sau pe verticală în raport cu primul punct.
- Apăsați tasta CTRL + Z sau apăsați pe ['Image: Draft UndoLine.png pentru a anula ultimul punct.
- Apăsați butonul ESC sau butonul Anulare pentru a întrerupe comanda curentă.
- Dacă sunt selectate mai multe linii Draft Lines, ele pot fi transformate într-un filament prin apăsarea butonului Upgrade Draft.
Proprietăți
- DATEStart: Punctul de pornire
- DATEEnd: Punctul final
- DATESubdivisions: Împărțirea liniei cu numărul de subdiviziuni dat introduced in version 0.16/ro
Data
- DateStart: specifies the start point.
- DateEnd: specifies the end point.
- DateSubdivisions: specifies the number of interior nodes in the line. introduced in version 0.16
- DateLength: (read-only) specifies the length of the segment.
View
- VizualizareEnd Arrow: if it is
true
it will display a symbol at the last point of the line, so it can be used as an annotation line. - VizualizareArrow Size: specifies the size of the symbol displayed at the end of the line.
- VizualizareArrow Type: specifies the type of symbol displayed at the end of the line, which can be "Dot", "Circle", "Arrow", or "Tick".
Script-Programare
Instrumentul Linie poate fi utilizat în macros și din consola Python utilizând următoarea funcție:
The Line tool can be used in macros and from the Python console by using the following function:
Line = makeLine(p1, p2)
Line = makeLine(LineSegment)
Line = makeLine(Shape)
- Creează un obiect
Line
între cei două puncte punctelep1
șip2
, fiecare definit caFreeCAD.Vector
- Creează un obiect
Line
dintr-unPart.LineSegment
- Creează un obiect
Line
de la primul vârf la ultimul vârf alShape
dată - Se va folosi versiunea curentă Draft Linestyle
Exempluː
import FreeCAD as App
import Draft
_doc = App.newDocument()
p1 = App.Vector(0, 0, 0)
p2 = App.Vector(1000, 500, 0)
p3 = App.Vector(-250, -500, 0)
p4 = App.Vector(500, 1000, 0)
Line1 = Draft.makeLine(p1, p2)
Line2 = Draft.makeLine(p3, p4)
_doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub