Draft Label/de: Difference between revisions
(Created page with "==Optionen==") |
(Created page with "==Eigenschaften==") |
||
Line 38: | Line 38: | ||
* Press {{KEY|Esc}} or the {{button|Close}} button to abort the current command. |
* Press {{KEY|Esc}} or the {{button|Close}} button to abort the current command. |
||
== |
==Eigenschaften== |
||
=== Data === |
=== Data === |
Revision as of 22:31, 14 October 2020
Draft Label |
Menüeintrag |
---|
Draft → Label |
Arbeitsbereich |
Draft, Arch |
Standardtastenkürzel |
D L |
Eingeführt in Version |
0.17 |
Siehe auch |
Draft Text, Draft ShapeString |
Beschreibung
Das Etikettenwerkzeug fügt ein mehrzeiliges Textfeld mit einer 2-teiligen Führungslinie und einem Pfeil ein. Wenn beim Starten des Befehls ein Objekt oder ein Unterelement (Fläche, Kante oder Scheitelpunkt) ausgewählt wird, kann das Etikett veranlasst werden, ein bestimmtes Attribut des ausgewählten Elements anzuzeigen, einschließlich Position, Länge, Fläche, Volumen oder Material.
Um ein einfacheres Textelement ohne Pfeil einzufügen, verwende Entwurf Text. Um feste Textformen zu erstellen, verwende Entwurf FormZeichenfolge mit Part extrudieren.
Verschiedene Etiketten mit unterschiedlichen Ausrichtungen, Hinweissymbolen und Informationen
Anwendung
- Press the Draft Label button, or press D then L keys.
- Click a first point on the 3D view, or type a coordinate and press the add point button. This point indicates the target (arrow head). This can be anywhere, it doesn't need to be an element.
- Click a second point on the 3D view, or type a coordinate and press the add point button. This point indicates the start of a horizontal or vertical leader.
- Click a third point on the 3D view, or type a coordinate and press the add point button. This point indicates the base point of the text.
Note: the direction of the horizontal straight segment, to the right or to the left, will automatically align the text to the opposite direction. If the leader goes vertically up, the text is aligned to the left; if it goes vertically down, it is aligned to the right.
Note 2: by pre-selecting an object, or a sub-element (vertex, edge or face), before pressing the tool button, the label will become parametric, that is, it will remember which object it is bound to, and it will be able to display a particular attribute of that object. If the attributes of the object change later on, the label will adjust the displayed information.
Optionen
- Click on Label type to select the type of information to display, including "Custom", "Name", "Label", "Position", "Length", "Area", "Volume", "Tag", and "Material". (See explanation of Label types below)
- To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component. You can press the add point button when you have the desired values to insert the point.
- Hold Ctrl while placing the label to force snapping your point to the nearest snap location, independently of the distance.
- Press Esc or the Close button to abort the current command.
Eigenschaften
Data
- DatenLabel Type: specifies the type of information shown by this label (see Label types below).
- DatenCustom Text: specifies the text block to display when DatenLabel Type is set to "Custom", or the label is not parametric. The text is given as a list of strings; each element on the list, separated by a comma, indicates a new line of text.
- DatenText: (read-only) indicates the actual text displayed by the label, depending on the DatenLabel Type.
- DatenTarget Point: specifies the position of the tip of the leader.
- DatenStraight Direction: specifies the direction of the straight segment of the leader, either horizontal or vertical.
- DatenStraight Distance: specifies the length of the straight segment of the leader, starting from the base point of the text. If the distance is positive, the leader starts from the right side of the text, and the text aligns to the right; otherwise, the leader starts from the left side of the text, and the text aligns to the left.
- DatenPosition: specifies the base point of the first line of the text block; it also influences how the leader is drawn.
- DatenAngle: specifies the rotation of the baseline of the first line of the text block; it also influences how the leader is drawn, as it will no longer be horizontal or vertical.
- DatenAxis: specifies the axis to use for the rotation.
Label types
- Custom: displays the contents of DatenCustom Text.
- Name: displays the internal name of the target object; the internal name is assigned to the object at its creation time, and remains fixed throughout the existence of the object.
- Label: displays the label of the target object; the label of the object can be changed by the user at any time.
- Position: displays the coordinates of the base point of the target object, of the target vertex, or of the center of mass of the target sub-element, if applicable.
- Length: displays the length of the target sub-element, if applicable.
- Area: displays the area of the target sub-element, if applicable.
- Volume: displays the volume of the target object, if applicable.
- Tag: displays the
Tag
attribute of the target object, if the object has such property, for example, objects created with the Arch Workbench. - Material: displays the label of the material of the target object, if the target object has such property.
View
- AnsichtText Font: specifies the font to use to draw the text. It can be a font name, such as "Arial", a default style such as "sans", "serif" or "mono", a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold". If the given font is not found on the system, a generic one is used instead.
- AnsichtText Size: specifies the size of the text. If the label object is created in the tree view but no text is visible in the 3D view, increase the size of the text until it is visible.
- AnsichtText Alignment: specifies the vertical alignment of the baseline of the text with respect to the leader. It can be top, middle or bottom.
- AnsichtText Color: specifies the color of the text in an RGB tuple (R, G, B).
- AnsichtLine Width: specifies the width of the leader.
- AnsichtLine Color: specifies the color of the leader.
- AnsichtArrow Size: specifies the size of the symbol displayed at the tip of the leader.
- AnsichtArrow Type: specifies the type of symbol displayed at the tip of the leader, which can be dot, circle, arrow, or tick.
- AnsichtFrame: if it is "Rectangle" it will draw a frame around the text.
- AnsichtLine: if it is
true
the leader line will be displayed; otherwise only the text and the symbol at the tip will be displayed. - AnsichtDisplay Mode: if it is "3D text" the text will be aligned to the scene axes, initially lying on the XY plane; if it is "2D text" the text will always face the camera.
Scripting
See also: Draft API and FreeCAD Scripting Basics.
The Label tool can be used in macros and from the Python console by using the following function:
Label = makeLabel(targetpoint=None, target=None, direction=None, distance=None, labeltype=None, placement=None)
- Creates a
Label
object, with the leader pointing totargetpoint
, and linking to thetarget
object which must be aDocumentObject
(Editor: or a SelectionObject? This is unclear). direction
is either "Horizontal", "Vertical", or "Custom".distance
is the distance from the base point of the text to the leader.labeltype
is one of "Custom", "Name", "Label", "Position", "Length", "Area", "Volume", "Tag", or "Material".- If a
placement
is given, it is used for the base point of the text; otherwise the text is created at the origin.
Change the custom text by overwriting the CustomText
attribute. A list of strings can be used; each element will be displayed in its own line.
The view properties of Label
can be changed by overwriting its attributes; for example, overwrite ViewObject.TextSize
with the new size in millimeters.
Example:
import FreeCAD, Draft
Rectangle = Draft.makeRectangle(4000, 1000)
p1 = FreeCAD.Vector(-200, 1000, 0)
place1 = FreeCAD.Placement(FreeCAD.Vector(-1000, 1300, 0), FreeCAD.Rotation())
Label1 = Draft.makeLabel(p1, Rectangle, "Horizontal", 500, "Label", place1)
Label1.ViewObject.TextSize = 200
p2 = FreeCAD.Vector(-200, 0, 0)
place2 = FreeCAD.Placement(FreeCAD.Vector(-1000, -300, 0), FreeCAD.Rotation())
Label2 = Draft.makeLabel(p2, Rectangle, "Horizontal", 500, "Custom", place2)
Label2.CustomText = ["Beware of the", "sharp edges"]
Label2.ViewObject.TextSize = 200
FreeCAD.ActiveDocument.recompute()
p3 = FreeCAD.Vector(1000, 1200, 0)
place3 = FreeCAD.Placement(FreeCAD.Vector(2000, 1800, 0), FreeCAD.Rotation())
Label3 = Draft.makeLabel(p3, Rectangle, "Horizontal", -500, "Area", place3)
Label3.ViewObject.TextSize = 200
FreeCAD.ActiveDocument.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework