Draft Arc
Draft Arc |
Menyplacering |
---|
Draft -> Arc |
Arbetsbänkar |
Draft, Arch |
Standard genväg |
A R |
Introducerad i version |
- |
Se även |
Draft Circle |
Beskrivning
Detta verktyg ritar en cirkelbåge genom att välja fyra punkter: centrum, radien, startvinkel och slutvinkel.
The Draft Arc command creates a circular arc on the current working plane from a center, a radius, a start angle and an aperture angle. The radius and the angles can be defined by picking points.
A Draft Arc is in fact a Draft Circle with a DataFirst Angle that is not the same as its DataLast Angle.
Usage
See also: Draft Tray, Draft Snap and Draft Constrain.
Bruk
- Markera punkter i ett tomt område i 3d vyn, eller på ett existernade objekt.
- Cirkelbågsverktyget ärver Cirkelverktygets funktionalitet för de två första stegen, så du kan trycka på ALT för att välja en tangent istället för centrum eller radie.
- Nedtryckning av CTRL kommer att snäppa din punkt till tillgängliga snäpp-punkter.
- Nedtryckning av SKIFT kommer att begränsa din nya punkt i relation till föregående punkt.
- Skriv in siffror för att manuellt mata in en koordinat.
- Nedtryckning av ALT när du väljer slutvinkeln kommer att ändra riktningen till moturs.
- Om du trycker på ESC så avbryts funktionen.
Options
The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).
- To manually enter the coordinates for the center enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
- Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
- Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating arcs.
- Press S to switch Draft snapping on or off.
- Press Esc or the Close button to abort the command.
Notes
- A Draft Arc can be edited with the Draft Edit command.
Preferences
See also: Preferences Editor and Draft Preferences.
- If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Circle instead of a Draft Circle.
Properties
See Draft Circle.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To create a Draft Arc use the make_circle
method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeCircle
method.
Example:
import FreeCAD as App
import Draft
doc = App.newDocument()
arc1 = Draft.make_circle(200, startangle=0, endangle=90)
arc2 = Draft.make_circle(500, startangle=20, endangle=160)
arc3 = Draft.make_circle(750, startangle=-30, endangle=-150)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub