Draft Arc
Draft Arc |
Ubicación en el Menú |
---|
Croquis → Arco |
Entornos de trabajo |
Croquis, Arquitectura |
Atajo de teclado por defecto |
A R |
Introducido en versión |
- |
Ver también |
Circunferencia |
Descripción
La herramienta arco crea un arco en el plano de trabajo actual introduciendo cuatro puntos, el centro, el radio, el primer punto y el último punto, o seleccionando tangencias, o cualquier combinación de ellas. Toma el espesor de línea y color previamente definidos en la pestaña de tareas. Esta herramienta funciona del mismo modo que la herramienta circunferencia, pero añade los ángulos inicial y final.
The Arc tool creates a circular arc in the current work plane by entering four points, the center, a point that defines the radius, the first end point and the second end point, or by picking tangents, or any combination of those. It uses the Draft Linestyle set on the Draft Tray.
This tool works the same way as the Draft Circle tool, but adds start and end angles. To draw an elliptical arc use Draft Ellipse. You can also approximate a circular arc by using the Draft BSpline, Draft BezCurve, and Draft CubicBezCurve tools.
Utilización
- Presiona el botón Arco, o presiona las teclas A y R
- Indica un primer punto en la vista 3D, o escribe unas coordenadas
- Indica un segundo punto en la vista 3D, o introduce el valor del radio
- Indica un tercer punto en la vista 3D, o introduce un ángulo de inicio
- Indica un cuarto punto en la vista 3D, o introduce un ángulo final
The arc can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the center point to a new position.
The arc can be turned into a circle after creation, by setting its first angle and last angle properties to the same value.
Opciones
- El principal uso de la herramienta arco es designando 4 puntos: el centro, un punto de la circunferencia, definiendo el radio, un tercer punto definiendo el ángulo de inicio del arco, y un cuarto punto definiendo su final.
- Presionando ALT, puedes seleccionar una tangente en lugar de designar un punto, para definir la circunferencia base del arco. Puedes por tanto construir diversos tipos de circunferencias seleccionando una, dos o tres tangencias.
- La dirección del arco depende del movimiento que hagas con el ratón. Si empiezas a moverlo en sentido de las agujas del reloj después de indicar el tercer punto, tu arco irá en sentido de las agujas del reloj. Para ir al contrario de las agujas del reloj, simplemente mueve el ratón sobre el tercer punto indicado, hasta que el arco se dibuje hacia el otro sentido.
- Para introducir las coordenadas manualmente, simplemente introduce los números, presiona ENTER entre cada componente X, Y y Z.
- Presiona T o selecciona la casilla para activar/desactivar el botón Continue. Si el modo continuo está activado, la herramienta arco se reiniciará después de indicar el cuarto punto, permitiendo que dibujes otro arco sin necesidad de presionar el botón de arco de nuevo.
- Presiona CTRL mientras dibujas para forzar el ajuste de tu punto a la ubicación de ajuste más cercana, independientemente de la distancia.
- Presiona SHIFT mientras dibujas para restringir tu punto horizontal o verticalmente en relación con el centro.
- Presiona ESC o el botón Cancelar para abortar la línea de comando actual.
- El arco se puede convertir en una circunferencia después de crearse, definiendo el mismo valor para las propiedades de sus ángulos de inicio y fin.
Propiedades
- DatosRadius: El radio del arco
- DatosFirst Angle: El ángulo del primer punto del arco
- DatosLast Angle: El ángulo del último punto del arco
Data
- DatosFirst Angle: specifies the angle of the first point of the arc.
- DatosLast Angle: specifies the angle of the last point of the arc.
- DatosRadius: specifies the radius of the arc.
- DatosMake Face: specifies if the arc makes a face or not. This property only works if the shape is a full circle.
- To make an arc a full circle set the DatosFirst Angle and DatosLast Angle to the same value. The values 0° and 360° aren't considered the same, so if these two values are used, the circle will not form a face.
View
- VistaPattern: specifies a Draft Pattern with which to fill the face of the arc. This property only works if the arc is a full circle, and if DatosMake Face is
true
, and if VistaDisplay Mode is "Flat Lines". - VistaPattern Size: specifies the size of the Draft Pattern.
Archivos de guión
La herramienta circunferencia también se puede utilizar para crear arco en macros y desde la consola de Python utilizando la siguiente instrucción, con los argumentos adicionales dados:
The Arc tool can be used in macros and from the Python console by using the same function to create circles, with additional arguments. See the information in Draft Circle.
Example:
import Draft
Arc1 = Draft.makeCircle(200, startangle=0, endangle=90)
Arc2 = Draft.makeCircle(500, startangle=20, endangle=160)
Arc3 = Draft.makeCircle(750, startangle=-30, endangle=-150)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub