CAM Parcours à partir de formes
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Path Parcours à partir de formes |
Emplacement du menu |
---|
Path → Partial commands → From Shape |
Ateliers |
Path |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Aucun |
Description
Parcours d'usinage à partir de formes ne correspond pas au flux de travail Path actuel. Pour cette raison, il est déplacé vers les fonctionnalités expérimentales.
Cet outil génère des parcours d'outils à partir des bords d'un objet Parcours.
Les parcours d'outils ne sont pas compensés pour le rayon d'outil. Aucun contrôleur d'outil n'est associé aux parcours d'outils générés.
Utilisation
Toutes les arêtes associées à la sélection du modèle 3D seront incluses.
- Sélectionnez les arêtes en sélectionnant l'objet entier à partir de la vue 3D ou de l'arborescence du document, ou en sélectionnant des arêtes individuelles, ou par Faces à partir de la vue 3D.
- Appuyez sur le bouton à partir de la forme
Le parcours d'outil est ajouté en dehors du travail de Path.
Options
Toutes les options fournies sont disponibles uniquement à partir de la vue FromShape.Property.Data et incluent:
- Axe de rétraction
- Hauteur de rétraction
- Reprendre la hauteur
- Vitesse d'avance
- Vitesse d'avance verticale
Propriétés
Données
Empty
Vue
Empty
Script
See also: FreeCAD Scripts de Base.
DocString Info
Returns a Path object from a list of shapes
- shapes: input list of shapes.
- start (Vector()): feed start position, and also serves as a hint of path entry.
- return_end (False): if True, returns tuple (path, endPosition).
- arc_plane(1): 0=None,1=Auto,2=XY,3=ZX,4=YZ,5=Variable. Arc drawing plane, corresponding to G17, G18, and G19.
If not 'None', the output wires will be transformed to align with the selected plane, and the corresponding GCode will be inserted. 'Auto' means the plane is determined by the first encountered arc plane. If the found plane does not align to any GCode plane, XY plane is used. 'Variable' means the arc plane can be changed during operation to align to the arc encountered.
- sort_mode(1): 0=None,1=2D5,2=3D,3=Greedy. Wire sorting mode to optimize travel distance.
'2D5' explode shapes into wires, and groups the shapes by its plane. The 'start' position chooses the first plane to start. The algorithm will then sort within the plane and then move on to the next nearest plane. '3D' makes no assumption of planarity. The sorting is done across 3D space. 'Greedy' like '2D5' but will try to minimize travel by searching for nearest path below the current milling layer. The path in lower layer is only selected if the moving distance is within the value given in 'threshold'.
- min_dist(0.0): minimum distance for the generated new wires. Wires maybe broken if the
algorithm see fits. Set to zero to disable wire breaking.
- abscissa(3.0): Controls vertex sampling on wire for nearest point searching
The sampling is dong using OCC GCPnts_UniformAbscissa
- nearest_k(3): Nearest k sampling vertices are considered during sorting
- orientation(0): 0=Normal,1=Reversed. Enforce loop orientation
'Normal' means CCW for outer wires when looking against the positive axis direction, and CW for inner wires. 'Reversed' means the other way round
- direction(0): 0=None,1=XPositive,2=XNegative,3=YPositive,4=YNegative,5=ZPositive,6=ZNegative. Enforce open path direction
- threshold(0.0): If two wire's end points are separated within this threshold, they are consider
as connected. You may want to set this to the tool diameter to keep the tool down.
- retract_axis(2): 0=X,1=Y,2=Z. Tool retraction axis
- retraction(0.0): Tool retraction absolute coordinate along retraction axis
- resume_height(0.0): When return from last retraction, this gives the pause height relative to the Z
value of the next move.
- segmentation(0.0): Break long curves into segments of this length. One use case is for PCB autolevel,
so that more correction points can be inserted
- feedrate(0.0): Normal move feed rate
- feedrate_v(0.0): Vertical only (step down) move feed rate
- verbose(true): If true, each motion GCode will contain full coordinate and feedrate
- abs_center(false): Use absolute arc center mode (G90.1)
- preamble(true): Emit preambles
- deflection(0.01): Deflection for non circular curve discretization. It also also used for
discretizing circular wires when you 'Explode' the shape for wire operations
Example:
shapes = [Box.Shape]
Path.fromShapes(shapes, start=Vector(), return_end=False arc_plane=1, sort_mode=1, min_dist=0.0, abscissa=3.0, nearest_k=3, orientation=0, direction=0, threshold=0.0, retract_axis=2, retraction=0.0, resume_height=0.0, segmentation=0.0, feedrate=0.0, feedrate_v=0.0, verbose=true, abs_center=false, preamble=true, deflection=0.01)
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test