CAM Post/it: Difference between revisions

From FreeCAD Documentation
(Created page with "==Utilizzo==")
(Created page with "# Impostare le proprietà '''Output File''' del Progetto Path che si desidera esportare # Impostare le proprietà '''Post Processor''' nella Macchina assoc...")
Line 7: Line 7:
==Utilizzo==
==Utilizzo==


# Set the '''Output File''' property of the [[Path Project]] you wish to export
# Impostare le proprietà '''Output File''' del [[Path Project/it|Progetto Path]] che si desidera esportare
# Set the '''Post Processor''' property in the Machine associated with the Project
# Impostare le proprietà '''Post Processor''' nella Macchina associata al Progetto
# Press the {{KEY|[[Image:Path PostProcess.png|32px]] [[Path PostProcess|PostProcess]]}} button
# Premere il pulsante {{KEY|[[Image:Path PostProcess.png|32px]] [[Path PostProcess/it|Post elaborazione]]}}


==Options==
==Options==

Revision as of 16:38, 24 January 2016

Post elaborazione

Posizione nel menu
Path → Imposta progetto → Post-elaborazione
Ambiente
Path
Avvio veloce
P,P
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Questo comanda esporta un Progetto Path selezionato in un file di codice-G

Utilizzo

  1. Impostare le proprietà Output File del Progetto Path che si desidera esportare
  2. Impostare le proprietà Post Processor nella Macchina associata al Progetto
  3. Premere il pulsante Post elaborazione

Options

  • If output file and post-processor properties are not set in the Project, the contents of the Project is shown in a dialog window for verification instead
  • You can also export a Project or any other Path directly to G-code by using the File->Export menu