CAM Fixture: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
Renatorivo (talk | contribs) (Undo revision 244890 by Renatorivo (talk)) |
||
Line 5: | Line 5: | ||
==Description== <!--T:2--> |
==Description== <!--T:2--> |
||
<!--T:3--> |
|||
This tool sets the Work Offset Coordinate Fixture of the machine CNC controller. |
This tool sets the Work Offset Coordinate Fixture of the machine CNC controller. |
||
Line 15: | Line 16: | ||
==Usage== <!--T:4--> |
==Usage== <!--T:4--> |
||
<!--T:5--> |
|||
# Press the {{KEY|[[Image:Path Fixture.png|16px]] [[Path Fixture|Fixture]]}} button |
# Press the {{KEY|[[Image:Path Fixture.png|16px]] [[Path Fixture|Fixture]]}} button |
||
# Select the desired Work Offset Fixture from the drop-menu. |
# Select the desired Work Offset Fixture from the drop-menu. |
||
Line 20: | Line 22: | ||
==Properties== <!--T:6--> |
==Properties== <!--T:6--> |
||
<!--T:7--> |
|||
* {{PropertyData|Fixture}}: Sets the current fixture point |
* {{PropertyData|Fixture}}: Sets the current fixture point |
||
* {{PropertyData|Active}}: Defines if this command is active or not when inserted into a compound |
* {{PropertyData|Active}}: Defines if this command is active or not when inserted into a compound |
Revision as of 18:03, 18 January 2018
Path Fixture |
Menu location |
---|
Path → Partial Commands → Fixture |
Workbenches |
Path |
Default shortcut |
P,F |
Introduced in version |
- |
See also |
None |
Description
This tool sets the Work Offset Coordinate Fixture of the machine CNC controller.
Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:
- G53 -> Machine coordinate system.
- G54 -> Scratchpad coordinate system.
- G55 to G59 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
- G59 allows extension from G59.1 to G59.255 on many CNC Controllers.
Usage
- Press the Fixture button
- Select the desired Work Offset Fixture from the drop-menu.
Properties
- DataFixture: Sets the current fixture point
- DataActive: Defines if this command is active or not when inserted into a compound