CAM Drilling/it: Difference between revisions
m (FuzzyBot moved page Path Drilling/it to CAM Drilling/it without leaving a redirect: Teil der übersetzbaren Seite „Path Drilling“) |
(Updating to match new version of source page) |
||
Line 2: | Line 2: | ||
{{Docnav |
{{Docnav |
||
|[[ |
|[[CAM_Pocket_Shape|PocketShape]] |
||
|[[ |
|[[CAM_MillFace|MillFace]] |
||
|[[ |
|[[CAM_Workbench|CAM]] |
||
|IconL= |
|IconL=CAM_Pocket_Shape.svg |
||
|IconR= |
|IconR=CAM_MillFace.svg |
||
|IconC= |
|IconC=Workbench_CAM.svg |
||
}} |
}} |
||
Line 17: | Line 17: | ||
==Descrizione== |
==Descrizione== |
||
The [[Image: |
The [[Image:CAM_Drilling.svg|16px]] [[CAM_Drilling|Drilling]] tool generates a drilling Operation in the Job. |
||
[[Image:Path_Drilling_Sample.png|400px]] |
[[Image:Path_Drilling_Sample.png|400px]] |
||
{{Caption|Above: |
{{Caption|Above: CAM Drilling operation sample}} |
||
==Usage== |
==Usage== |
||
Line 46: | Line 46: | ||
{{TitleProperty|Base}} |
{{TitleProperty|Base}} |
||
Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the |
Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the CAM Job model as needed. |
||
* {{PropertyData|Placement}}: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container) |
* {{PropertyData|Placement}}: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container) |
||
Line 143: | Line 143: | ||
{{Docnav |
{{Docnav |
||
|[[ |
|[[CAM_Pocket_Shape|PocketShape]] |
||
|[[ |
|[[CAM_MillFace|MillFace]] |
||
|[[ |
|[[CAM_Workbench|CAM]] |
||
|IconL= |
|IconL=CAM_Pocket_Shape.svg |
||
|IconR= |
|IconR=CAM_MillFace.svg |
||
|IconC= |
|IconC=Workbench_CAM.svg |
||
}} |
}} |
||
{{ |
{{CAM_Tools_navi{{#translation:}}}} |
||
{{Userdocnavi{{#translation:}}}} |
{{Userdocnavi{{#translation:}}}} |
Latest revision as of 14:14, 26 March 2024
Foratura |
Posizione nel menu |
---|
Path → Foratura |
Ambiente |
Path |
Avvio veloce |
P,D |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Descrizione
The Drilling tool generates a drilling Operation in the Job.
Above: CAM Drilling operation sample
Usage
- Selezionare lo strumento Foratura dal menu Path, o premere il pulsante GUI.
- Scegliere un controller dell'utensile dalla finestra pop-up del dialogo di selezione e confermare premendo OK.
- I fori con il diametro degli utensili disponibili per l'elaborazione compaiono nell'elenco della scheda Geometria di base. Confermare che i fori dell'elenco sono i fori destinati all'elaborazione, oppure aggiungerne, abilitarne o disabilitarne, se necessario. I fori possono essere aggiunti selezionando le facce che ospitano i fori.
- Accertarsi che le profondità e la profondità finale, Depths e Final Depth, siano corrette, altrimenti correggerle.
- Accertarsi che Heights, Safe e Clearance Heights siano corrette, altrimenti correggerle.
- Nella scheda Operazione, specificare il valore di Retract Height, Peck Depth, e il periodo Dwell in secondi. Abilitare Peck, Dwell, e Use Tip Length se è necessario.
Notes
- When using edges for Base Geometry, always select the bottom edge of the hole.
- Always verify the tool chosen is the correct diameter for the hole(s) selected.
- Peck disabled generates (G81 canned drill cycles). Peck enabled generates (G83 canned drill cycles).
- Dwell enabled is currently unsupported, but is intended to generate (G82 canned drill cycles).
Properties
Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.
Base
Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the CAM Job model as needed.
- DatiPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
- DatiAngle: Angle in degrees applied to rotation of the object around Axis property value
- DatiAxis: Axis (one or multiple) around which to rotate the object, set in sub-properties: X, Y, Z
- DatiX: X axis value
- DatiY: Y axis value
- DatiZ: Z axis value
- DatiPosition: Position of the object, set in sub-properties: X, Y, Z - with respect to the origin (or origin of parent object container)
- DatiX: X distance value
- DatiY: Y distance value
- DatiZ: Z distance value
- DatiLabel: User-provided name of the object (UTF-8)
- DatiDisabled: List of disabled features
Depth
- DatiClearance Height: The height needed to clear clamps and obstructions
- DatiFinal Depth: Final Depth of Tool- lowest value in Z
- DatiSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
- DatiStart Depth: Starting depth of Tool - first cut depth in Z
Drill
- DatiAdd Tip Length: Calculate the tip length and subtract from final depth
- DatiDwell Enabled: Enable dwell
- DatiDwell Time: The time to dwell between peck cycles
- DatiPeck Depth: Incremental Drill depth before retracting to clear chips
- DatiPeck Enabled: Enable pecking
- DatiRetract Height: The height where feed starts and height during retract tool when path is finished
- DatiReturn Level: Controls how tool retracts Default=G98
Path
- DatiActive: Make False, to prevent operation from generating code
- DatiComment: An optional comment for this Operation
- DatiUser Label: User assigned label
- DatiTool Controller: Defines the Tool controller used in the Operation
Rotation (when available)
- DatiAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
DatiB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).- DatiEnable Rotation: Enable rotation to gain access to holes not normal to Z axis.
- DatiInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
- DatiReverse Direction: Reverse orientation of Operation by 180 degrees.
Tasks Window Editor Layout
Descriptions for the settings are provided in the Properties list above.
This section is simply a layout map of the settings in the window editor for the Operation.
Base Geometry
- Add: Adds selected element(s) which should be the base(s) for the path(s).
- Delete: Delete the selected item(s) in the Base Geometry list.
- Clear: Clear all items in the Base Geometry list.
Base Location
- Add: Add an (X,Y) coordinate location to the current drilling operation.
- Remove: Remove the selected location item(s) from the Base Location list.
- Edit: Edit the selected location item.
Depths
- Start Depth:
- Final Depth:
Heights
- Safe Height:
- Clearance Height:
Operation
- Tool Controller:
- Retract Height:
- Peck:
- Peck Depth:
- Dwell:
- Dwell Time:
- Use Tip Length:
Scripting
See also: FreeCAD Scripting Basics.
Example:
#Place code example here.
CAM
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub