CAM DressupRampEntry/fr: Difference between revisions
(Updating to match new version of source page) |
(Created page with "==Utilisation==") |
||
Line 6: | Line 6: | ||
Cet outil habille un parcours existant pour ajouter une rampe d'entrée dans l'usinage |
Cet outil habille un parcours existant pour ajouter une rampe d'entrée dans l'usinage |
||
== |
==Utilisation== |
||
# Select a contour or profile path [[Path Workbench|Path]] objects |
# Select a contour or profile path [[Path Workbench|Path]] objects |
Revision as of 12:02, 5 November 2018
Rampe d'entrée |
Emplacement du menu |
---|
Path → Path Dressup → RampEntry Dress-up |
Ateliers |
Path |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Path_DressupTag, Path_DressupDogbone , Path_DressupDragKnife |
Description
Cet outil habille un parcours existant pour ajouter une rampe d'entrée dans l'usinage
Utilisation
- Select a contour or profile path Path objects
- click the RampEntry Dress-up menu item
Properties
- Ramp Feed Rate can either be the current vertical or horizontal feed rate or some other custom value
- Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
- Method is used to select different modes of ramping:
- RampMethod1 goes down at the ramp angle and the moves horizontal to the target point
- RampMethod2 goes horizontal first and then down at the ramp angle to the target point
- RampMethod3 goes down in a zigzag way
- Helix goes down spiraling
- Dressup Start Depth is the distance above the target level where ramping starts
- UseStartDepth indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.