CAM DressupRampEntry/de: Difference between revisions

From FreeCAD Documentation
(Created page with "==Anwendung==")
 
(Created page with "==Eigenschaften==")
 
(One intermediate revision by the same user not shown)
Line 17: Line 17:
}}
}}


==Description==
<span id="Description"></span>
==Beschreibung==


The tool [[Image:CAM_DressupRampEntry.svg|24px]] [[CAM_DressupRampEntry|DressupRampEntry]] dresses up an existing path to add a ramp entry.
The tool [[Image:CAM_DressupRampEntry.svg|24px]] [[CAM_DressupRampEntry|DressupRampEntry]] dresses up an existing path to add a ramp entry.
Line 27: Line 28:
# Select the {{MenuCommand|CAM → Path Dressup → [[Image:CAM_DressupRampEntry.svg|16px]] RampEntry}} option from the menu.
# Select the {{MenuCommand|CAM → Path Dressup → [[Image:CAM_DressupRampEntry.svg|16px]] RampEntry}} option from the menu.


==Properties==
<span id="Properties"></span>
==Eigenschaften==


*'''Ramp Feed Rate''' : Can either be the current vertical or horizontal feed rate or some other custom value
*'''Ramp Feed Rate''' : Can either be the current vertical or horizontal feed rate or some other custom value

Latest revision as of 11:44, 25 April 2024

CAM DressupRampEntry

Menu location
CAM → Path Dressup → RampEntry
Workbenches
CAM
Default shortcut
None
Introduced in version
-
See also
CAM DressupTag, CAM DressupDogbone, CAM DressupDragKnife

Beschreibung

The tool DressupRampEntry dresses up an existing path to add a ramp entry.

Anwendung

  1. Select a contour or profile path objects.
  2. Select the CAM → Path Dressup → RampEntry option from the menu.

Eigenschaften

  • Ramp Feed Rate : Can either be the current vertical or horizontal feed rate or some other custom value
  • Angle : Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
  • Method : Used to select different modes of ramping:
    • RampMethod1: goes down at the ramp angle and the moves horizontal to the target point
    • RampMethod2: goes horizontal first and then down at the ramp angle to the target point
    • RampMethod3: goes down in a zigzag way
    • Helix: goes down spiraling
  • Dressup Start Depth : The distance above the target level where ramping starts
  • Use Start Depth : Indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.

From left to right: Ramp method 1, 2 and 3

Ramp method Helix