CAM: Usuwanie zadziorów
CAM: Usuwanie zadziorów |
Lokalizacja w menu |
---|
CAM → Usuwanie zadziorów |
Środowisko pracy |
CAM |
Domyślny skrót |
brak |
Wprowadzono w wersji |
0.18 |
Zobacz także |
brak |
Opis
Narzędzie Usuwanie zadziorów służy przede wszystkim do gratowania krawędzi.
Użycie
- There are several ways to invoke the command:
- Press the Deburr button.
- Select the CAM → Deburr option from the menu.
- The Deburr task panel opens. See Options.
- Select Base Geometry.
- Specify the required parameters.
- Press the OK button.
Options
After selecting the geometry in the Base Geometry section of the task panel you can press Apply to see the tool path as defined by the default options.
Next you can check your depths/step down and heights, just like with other path commands.
The Final step is to activate the Operation section where you can specify the following:
- Tool controller: Select the tool to use.
- Coolant Mode: Select
None
,Flood
orMist
. - Directions: Select
CW
(clockwise) orCCW
(counter-clockwise). - W: The dimension of your edge.
- h: The offset from the bottom of the tool. It's a safety feature because if the tip gets above the edge it won't cut anymore.
Properties
Data
Base
- DANEPlacement:
- DANELabel: User name of the object (UTF-8)
Deburr
- DANEDirection:
CCW
orCW
. - DANEEntry Point: Entry point of the operation, if set to 2 it will go in 2 corners from the default.
- DANEExtra depth: Extra depth (h in the task panel).
- DANE (Hidden)Join: How to join chamfer segments,
Round
orMiter
. - DANE (Hidden)Side: Side of the operation,
Outside
orInside
. - DANEWidth: The width of the chamfer (W in the task panel).
Depth
- DANEClearance Height: The height needed to clear clamps and obstructions (set by default to
OpStockZMax + SetupSheet.ClearanceHeightOffset
). - DANESafe Height: The height above which rapid motions are allowed. (set to
OpStockZMax + SetupSheet.SafeHeightOffset
). - DANEStart Depth: Starting depth of of the tool, first cut depth in Z.
- DANEStep Down: Incremental step down of the tool.
Op Values
- DANEOp Stock ZMax: The maximum Z value of the stock.
- DANEOp Stock ZMin: The minimum Z value of the stock.
- DANEOp Tool Diameter: The diameter of the tool.
Path
- DANEActive: Make
false
, to prevent operation from generating code. - DANEBase: The base geometry for this operation, edges or a face.
- DANEComment: An optional comment for this operation.
- DANECoolant Mode: Coolant mode for this operation.
- DANECycle Time: Estimated cycle time for this operation.
- DANETool Controller: The tool controller that will be used to calculate the path.
- DANEUser Label: User assigned label.
Środowisko pracy CAM
- Polecenia projektu: Zadanie, Przetwarzanie końcowe, Bezpieczeństwo, Eksport szablonu
- Polecenia narzędzi: Przeglądaj polecenia ścieżki, Symulator, Krawędzie w pętli, Przełącz aktywną operację, Otwarta biblioteka narzędzi, Stacja dokująca narzędzi
- Operacje podstawowe: Kontur, Kształt kieszeni, Owierty, Powierzchnia obróbki, Helisa, Algorytm adaptacyjny, Wpust, Grawer, Usuwanie zadziorów, Wycięcie V
- Operacje 3D: Obiekt 3D kieszeni, Powierzchnia 3D, Linia poziomu
- Ulepszenia: Odwzorowanie osi, Ulepszenie ścieżki konturu, Nadcięcie w narożniku, Rylec, Wprowadzenie / Wyprowadzenie, Parkowanie narzędzia, Pola mocujące, Korekta głębokości Z
- Polecenia uzupełniające: Mocowanie, Komentarz, Stop, Wstawka G-code, Sonda, G-code z kształtu
- Modyfikacja zadania: Kopia operacji w zadaniu, Szyk, Szybka kopia
- Operacje specjalne: Frezowanie gwintów
- Różności: Obszar, Obszar płaszczyzny roboczej
- Konstrukcja narzędzi: Narzędzia, Kształt narzędzia, Końcówki skrawające, Biblioteka narzędzi, Kontroler narzędzi
- Dodatek: Preferencje, Tworzenie skryptów
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework