Path Personalizza
Personalizza |
Posizione nel menu |
---|
Path → Comandi parziali → Personalizza |
Ambiente |
Path |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Descrizione
Questo strumento inserisce un oggetto tracciato che è costituito da codice G personalizzato e codificato a mano.
Because the Custom G-Code command provides no link to a Tool Controller, if a Tool is used by the custom G-Code, the Tool index must be written, along with the Spindle Start M-Code, in order that it is passed to the Postprocessor. This ensures that Tool changes and starts will be properly generated.
For example, to convey to the Postprocessor that the Tool used in the Custom G-Code operation has Tool index 6, and a Spindle Speed of 10,000, insert the following code at the beginning of the Custom G-Code Operation:
(T6: 4mm Endmill)
M6 T6
M3 S10000
Note that Feed rates will be correctly generated by the Postprocessor, only if the Custom G-Code Feed rates are written in Units/second.
Utilizzo
- Premere il pulsante Personalizza
- Scrivere il Codice G personalizzato nella proprietà G Code dell'oggetto appena creato. Consultare la pagina Script di Path per conoscere i comandi G-Code supportati.
Proprietà
- DatiG Code: I comandi G-Code personali per costruire il percorso