Assembly3 ConstraintPerpendicular

From FreeCAD Documentation
Revision as of 20:54, 9 April 2021 by FBXL5 (talk | contribs) (Created page with "{{UnfinishedDocu{{#translation:}}}} <languages/> <translate> {{Docnav |Angle |Point coincident |Assemb...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

Assembly ConstraintPerpendicular

Menu location
Assembly3 → ? → Perpendicular
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool builds a link between two objects of an assembly and matches their orientation. The selected elements of each object or more precise their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following object is moved to a position where both z-axes are perpendicular.

The offset of their origins in x-, y- and z-direction and the angles between the x-, and y-axes are not defined. Related to the first object the following object can still move along the x-, y- and z-axis and spin around both z-axes. This is leaving 5 degrees of freedom (DOFs) for each link unconstrained.

The constraint accepts linear edges and planar faces.

Usage

  1. Place two objects into an assembly
  2. Select one linear edge element or one planar face element of each object
  3. Press the Perpendicular button (not yet available via drop-down menu)