Złożenie 3: Wiązanie równa długość linii i łuku
Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.
Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.
Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.
Assembly3 ConstraintEqualLineArcLength |
Menu location |
---|
None |
Workbenches |
Assembly3 |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Equal Line Arc Length command constrains the length of a 2D line like a non-subdivided wire which is made with Draft Workbench tools in relation with a workplane.
It links the length of the 2D line with the length of an arc (2D or 3D?).
The length value of the selected line equals the length of selected arc.
Since I couldn't get this tool working here's the statement of the tool tip:
Add an "EqualLineArcLength" constraint to make a line of the same length as an arc.
Usage
- Select the 2D line to be constrained.
- Select a 2D arc to read its length value.
- Activate the Equal Line Arc Length command using the:
- Equal Line Arc Length button.
- Press the Solve constraints or the Quick solve button to recompute
- (if Auto recompute and Smart recompute are disabled).
Depending on the order of the selected line types following errors appear:
Constraint "EqualLineArcLength" requires the 1st element to be a linear edge Constraint "EqualLineArcLength" requires the 2nd element to be an arc edge Constraint "EqualLineArcLength" requires the 2nd element to be a circular edge
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework