All translations

Enter a message name below to show all available translations.

Message

Found 5 translations.

NameCurrent message text
 h English (en)* {{PropertyData|Base}}: Reference to base object (the one the other object is to be embedded into). The object should be a single solid.
* {{PropertyData|Tool}}: Reference to tool object (the object to be embedded). The object can be a single solid, or a [[Part_Compound|valid compound]] of solids.
* {{PropertyData|Mode}}: The mode of operation, equals 'Embed' (Changing that will transform the tool into another Part_JoinXXX). The value of 'bypass' can be used to temporarily disable the long computations (a compound of Base and Tool will be created, which is a fast operation).
* {{PropertyData|Refine}}: Sets whether to apply [[Part RefineShape|Refine]] operation or not, to the final shape. The default value is determined by a 'Automatically refine shape after boolean operation' checkbox in PartDesign preferences. When Mode property is 'bypass', Refine is ignored (never applied).
 h français (fr)*{{PropertyData|Base}} : Référence à l'objet de base (celui dans lequel l'autre objet doit être incorporé). L'objet doit être un seul solide.
*{{PropertyData|Tool}} : Référence à l'objet Insert (l'objet à incorporer). L'objet peut être un solide unique ou un [[Part_Compound/fr|composé valide]] de solides.
*{{PropertyData|Mode}} : Le mode  opératoire est égal à 'Intégrer' (Changer ce qui transformera l'Insert en une autre Part_JoinXXX). La valeur 'bypass' peut être utilisée pour désactiver temporairement les calculs longs (un composé de Base et Insert sera créé, ce qui est une opération rapide).
*{{PropertyData|Refine}} : Définit si l'opération [[Part_RefineShape/fr|Affiner]] doit être appliquée ou non à la forme finale. La valeur par défaut est déterminée par une case à cocher "Affiner automatiquement la forme après l'opération booléenne" dans les préférences de PartDesign. Lorsque la propriété Mode est réglée sur "bypass", Affiner est ignoré (jamais appliqué).
 h italiano (it)* {{PropertyData|Base}}: Riferisce l'oggetto di base (l'oggetto in cui si vuole incorporare l'altro oggetto). L'oggetto deve essere un solido unico.
* {{PropertyData|Tool}}: Riferisce l'oggetto da usare come utensile (l'oggetto da incorporare). L'oggetto può essere un solido unico, oppure un [[Part_Compound/it|composto valido]] di solidi.
* {{PropertyData|Mode}}: Stabilisce la modalità dell'operazione di Giunzione, che in questo caso è uguale a 'Connect' (cambiando modalità si trasforma lo strumento in uno strumento Giunzione diverso). Il valore 'bypass' può essere usato per disabilitare temporaneamente i lunghi calcoli (in questo caso, viene creato un oggetto Composto formato dagli oggetti Base e Tool , che è un'operazione veloce).
* {{PropertyData|Refine}}: Stabilisce se alla forma finale deve essere applicata l'operazione [[Part RefineShape/it|Affina]], oppure no. Il valore di default è stabilito dalla casella di controllo 'Affina automaticamente la forma dopo l'operazione booleana' nelle preferenze di PartDesign. Quando la proprietà Mode è impostata su 'bypass', Affina viene ignorato (Refine non è mai applicato).
 h polski (pl)* {{PropertyData|Baza}}: Odniesienie do obiektu bazowego ''(tego, w którym ma zostać osadzony inny obiekt)''. Obiekt powinien być pojedynczą bryłą.
* {{PropertyData|Narzędzie}}: Odniesienie do obiektu narzędzia (obiektu, który ma zostać osadzony). Obiekt może być pojedynczą bryłą lub [[Part_Compound|prawidłowym złożeniem]] brył.
* {{PropertyData|Tryb}}: Tryb działania, równy '''Osadź''' ''(Zmiana, która przekształci narzędzie w inne Part_JoinXXX)''. Wartość '''obejdź''' może być użyta do tymczasowego wyłączenia długich obliczeń (zostanie utworzone połączenie bazy i narzędzia, co jest szybką operacją).
* {{PropertyData|Ulepsz}}: Określa, czy zastosować operację [[Part_RefineShape/pl|ulepszania]] wobec ostatecznego kształtu. Wartość domyślna jest określona przez pole wyboru "Automatycznie udoskonal model po wykonaniu operacji logicznej" w [[PartDesign_Preferences/pl|Preferencjach środowiska Projekt Części]]. Gdy właściwość '''Tryb''' ma wartość '''Obejdź''', Ulepszanie jest ignorowane ''(nigdy nie jest stosowane)''.
 h română (ro)==Properties==
{{TitleProperty|Base}}
* {{PropertyData|Base}}: Reference to base object (the one the other object is to be embedded into). The object should be a single solid.
* {{PropertyData|Tool}}: Reference to tool object (the object to be embedded). The object can be a single solid, or a [[Part MakeCompound|valid compound]] of solids.
* {{PropertyData|Mode}}: The mode of operation, equals 'Embed' (Changing that will transform the tool into another Part_JoinXXX). The value of 'bypass' can be used to temporarily disable the long computations (a compound of Base and Tool will be created, which is a fast operation).
* {{PropertyData|Refine}}: Sets whether to apply [[Part RefineShape|Refine]] operation or not, to the final shape. The default value is determined by a 'Automatically refine shape after boolean operation' checkbox in PartDesign preferences. When Mode property is 'bypass', Refine is ignored (never applied).