All translations
Enter a message name below to show all available translations.
Found 8 translations.
Name | Current message text |
---|---|
h Deutsch (de) | {{VeryImportantMessage|'''Warnung:''' Dieser Abschnitt wurde für FreeCAD 0.16 erstellt. Es wurden erhebliche Änderungen bei der Pfaderstellung vorgenommen. Bitte beachte die Dokumentation des Arbeitsbereichs [[CAM_Workbench/de|CAM]] im Allgemeinen oder das Tutorium [[CAM Walkthrough for the Impatient/de|CAM Pfadbegehung]]!}} |
h English (en) | {{VeryImportantMessage|'''Warning:''' This section was made for FreeCAD 0.16. There have been made significant changes to the path creation. Please refer to the documentation of the [[CAM_Workbench|CAM workbench]] in general or the tutorial like [[CAM Walkthrough for the Impatient|CAM walk-through]]!}} |
h español (es) | === Generación de G-code === {{VeryImportantMessage|'''Aviso:''' Esta sección fue hecha para FreeCAD 0.16. Se han hecho cambios significativos en la creación de trayectorias. Por favor, consulta la documentación del [[Path_Workbench/es|Ambiente de trabajo trayectorias]] en general o el tutorial como [[Path Walkthrough for the Impatient/es|caminar trayectorias]]!}} |
h français (fr) | {{VeryImportantMessage|'''Attention :''' cette section est destinée à FreeCAD 0.16. Des modifications importantes ont été apportées au chemin de création. Reportez-vous à la documentation de l'[[CAM_Workbench/fr|atelier CAM]] en général ou au [[CAM_Walkthrough_for_the_Impatient/fr|tutoriel CAM, pas à pas pour l'impatient]]!}} |
h italiano (it) | === Generare il G-code === {{VeryImportantMessage|'''Warning:''' Questa sezione è stata realizzata per FreeCAD 0.16. Sono stati apportati cambiamenti significativi alla creazione del percorso. Si prega di fare riferimento alla documentazione dell'ambiente [[Path_Workbench/it|Path]] in generale o al tutorial della [[Path Walkthrough for the Impatient/it|procedura per path]]!}} |
h polski (pl) | {{VeryImportantMessage|'''Ostrzeżenie:''' Ta sekcja została stworzona dla FreeCAD v0.16. Zostały wprowadzone znaczące zmiany w tworzeniu ścieżek. Proszę zapoznać się z dokumentacją środowiska pracy [[CAM_Workbench/pl|CAM]] ogólnie lub z poradnikiem na przykład [[CAM_Walkthrough_for_the_Impatient/pl|Poradnik CAM dla niecierpliwych]]!}} |
h română (ro) | === Generarea codulului G-code === <span style="color:red;font:x-large bold"> Atenție:Această secțiune a fost făcută pentru FreeCAD 0.16. Au fost făcute schimbări semnificative în crearea căii. Consultați documentația [[Path_Workbench|Path workbench]] in general sau tutorialul ca [[Path Walkthrough for the Impatient|path walk-through]]!</span> |
h русский (ru) | === Генерация G-кода === {{VeryImportantMessage|'''Внимание:''' Этот раздел был сделан для FreeCAD 0.16. В создание траекторий инструментов были внесены большие изменения. Смотрите документацию [[Path_Workbench/ru|верстака Path]] в целом или учебник вроде [[Path Walkthrough for the Impatient/ru|Тропинки для нетерпеливых]]!}} |