All translations

Enter a message name below to show all available translations.

Message

Found 7 translations.

NameCurrent message text
 h čeština (cs)currently:<br />
*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
*ver 1.20 , 29/01/2018 optimization
*ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation
*ver 1.18 , 19/12/2017 ...
*ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"
*ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo
*ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], and create plane, axis, point, and add options separator for spreadsheet 
*ver 1.16 , 21/06/2017 add control height police (here PointSize 8) and checkbox for position the window to right or left<br />
*ver 1.15 , 19/12/2015 suppression PyQt4 option [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 see] , add checkBox for editing infos in report view<br />
*ver 1.14 , 04/08/2014 replace PyQt4 and PySide and correct tooltip not displayed cause on PySide and add fg<br />
*ver 1.13 , 27/07/2014 replace FCInfo_en_Ver_1-12_Docked.FCMacro to FCInfo_en_Ver_1-13_Docked.FCMacro accept PyQt4 and PySide<br />
*ver 1.12 , 10/03/2014 adding tooltip<br />
*ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, pourcent, fixed of grandeur carat <strike>"cd"</strike> in '''"ct"''',  display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape,  window dockable in FreeCAD<br />
*ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking<br />
(ver 1.10 , 18/11/2013 create scrollbar)<br />
*ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"'''print'''" by "'''App.Console.PrintMessage'''"<br />
<strike>ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)") </strike><br />
In a Linux distribution and in the case of an error of '''"ordinal not in range (128)"''' an alternative version exists on this page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]<br />
*ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)<br />
*ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.<br />
*ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object<br />
*ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.<br />
*ver 1.04 , 11/09/2013: read the file directly in a table.<br />
*ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"<br />
*ver 1.02 , 7/09/2013 : small updates<br />
*ver 1.00 , 6/09/2013<br />
 h Deutsch (de)currently:<br />
*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
*ver 1.20 , 29/01/2018 optimization
*ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation
*ver 1.18 , 19/12/2017 ...
*ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"
*ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo
*ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], and create plane, axis, point, and add options separator for spreadsheet 
*ver 1.16 , 21/06/2017 add control height police (here PointSize 8) and checkbox for position the window to right or left<br />
*ver 1.15 , 19/12/2015 suppression PyQt4 option [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 see] , add checkBox for editing infos in report view<br />
*ver 1.14 , 04/08/2014 replace PyQt4 and PySide and correct tooltip not displayed cause on PySide and add fg<br />
*ver 1.13 , 27/07/2014 replace FCInfo_en_Ver_1-12_Docked.FCMacro to FCInfo_en_Ver_1-13_Docked.FCMacro accept PyQt4 and PySide<br />
*ver 1.12 , 10/03/2014 adding tooltip<br />
*ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, pourcent, fixed of grandeur carat <strike>"cd"</strike> in '''"ct"''',  display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape,  window dockable in FreeCAD<br />
*ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking<br />
(ver 1.10 , 18/11/2013 create scrollbar)<br />
*ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"'''print'''" by "'''App.Console.PrintMessage'''"<br />
<strike>ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)") </strike><br />
In a Linux distribution and in the case of an error of '''"ordinal not in range (128)"''' an alternative version exists on this page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]<br />
*ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)<br />
*ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.<br />
*ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object<br />
*ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.<br />
*ver 1.04 , 11/09/2013: read the file directly in a table.<br />
*ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"<br />
*ver 1.02 , 7/09/2013 : small updates<br />
*ver 1.00 , 6/09/2013<br />
 h English (en)*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
*ver 1.21-2.01 (1.21-rmu) 11/06/2019 rmu replace all characters over 127 in ex: "°" in chr(176))    #degree
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
*ver 1.21 , 16/04/2019 optimization for Py 3... Qt 5...  FreeCAD 0.15 to 0.19 release
*ver 1.20 , 29/01/2018 optimization
*ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation
*ver 1.18 , 19/12/2017 ...
*ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"
*ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo
*ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], and create plane, axis, point, and add options separator for spreadsheet 
*ver 1.16 , 21/06/2017 add control height police (here PointSize 8) and checkbox for position the window to right or left<br />
*ver 1.15 , 19/12/2015 suppression PyQt4 option [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 see] , add checkBox for editing infos in report view<br />
*ver 1.14 , 04/08/2014 replace PyQt4 and PySide and correct tooltip not displayed cause on PySide and add fg<br />
*ver 1.13 , 27/07/2014 replace FCInfo_en_Ver_1-12_Docked.FCMacro to FCInfo_en_Ver_1-13_Docked.FCMacro accept PyQt4 and PySide<br />
*ver 1.12 , 10/03/2014 adding tooltip<br />
*ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, percent, fixed of grandeur carat <strike>"cd"</strike> in '''"ct"''',  display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape,  window dockable in FreeCAD<br />
*ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking<br />
(ver 1.10 , 18/11/2013 create scrollbar)<br />
*ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"'''print'''" by "'''App.Console.PrintMessage'''"<br />
<strike>ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)") </strike><br />
In a Linux distribution and in the case of an error of '''"ordinal not in range (128)"''' an alternative version exists on this page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]<br />
*ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)<br />
*ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.<br />
*ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object<br />
*ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.<br />
*ver 1.04 , 11/09/2013: read the file directly in a table.<br />
*ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"<br />
*ver 1.02 , 7/09/2013 : small updates<br />
*ver 1.00 , 6/09/2013<br />
 h français (fr)*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" remplacé caractères micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
*ver 1.21-2.01 (1.21-rmu) 11/06/2019 rmu remplacé tous les caractères au dessus de 127 in ex: "°" en chr(176))    #degree
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
*ver 1.21 , 16/04/2019 optimisation pour Py 3... Qt 5...
*ver 1.20 , 29/01/2018 optimisation
*ver 1.19 , 20/01/2018 mise en place d'une case à cocher pour activer ou désactiver le module spreadSheet, le module ralenti la macro si l'objet sélectionné est "compliqué". Optimisation.
*ver 1.18 , 19/12/2017 ....
*ver 1.17c , 14/12/2017 création de plans avec las mêmes coordonnées d'un projet dans un autre projet et remplacement de "FCInfo" by "__title__"
*ver 1.17b , 13/12/2017 petite correction remplascé FCTreeView to FCInfo
*ver 1.17 , 12/12/2017 ajout et mise à jour de la section Moment of inertia mm et kg par pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], et création de plans, axes, point, et ajout de l'option sépateur pour le spreadsheet 
*ver 1.16 , 21/06/2017 ajout du contrôle de la hauteur des caractères (here PointSize 8) et checkbox pour la position de la fenêtre à gauche ou à droite<br />
*ver 1.16 , 21/06/2017 ajout d'un contrôle sur la hauteur des caractères affichés, ajout d'une case à cocher pour positionner la macro à gauche ou droite et nouveau code de recherche de chemin de l'emplacement des macros. 
*ver 1.15 , 19/12/2015 suppression de l'option PyQt4 [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 voir la cause] , ajout d'un checkBox pour éditer ou non les infos dans la vue rapport
*ver 1.14 , 04/08/2014 PyQt4 et PySide, correction des tooltips qui ne s'affichaient plus a cause de PySide, ajout de "fg" et d'une décimale dans la densité
*ver 1.13 , 27/07/2014 remplacement FCInfo_fr_Ver_1-12_Docked.FCMacro avec FCInfo_fr_Ver_1-13_Docked.FCMacro accepte PyQt4 et PySide<br />
*ver 1.12 , 10/03/2014 ajout de tooltips sur les boutons.
*ver 1.11 , 04/03/2014 ajout de µm, nm, pm, fm, µg, ng, pg, pour-cent, correction de la grandeur carat <strike>"cd"</strike> en '''"ct"''',  affichage du label et du nom interne, correction du calcul des angles XY YZ ZX fonctionnait bien sur un objet simple mais donnait une valeur erronée sur une pièce composée (prenait d'autres coordonnées ! découvert en comparant le tableau et les coordonnées affichées dans la section Inclinaisons), fenêtre volante ou dockable n'importe où dans FreeCAD<br />
*ver 1.10.b, 19/11/2013 boutons à l'extérieur du scrollbar et blocage des dimensions de la fenêtre
*ver 1.10 , 18/11/2013 ajout d'une "scrollbar" pour diminuer la dimension de la fenêtre
*ver 1.08.b 10/11/2013 correction d'erreur d'affichage de la surface des faces listées dans le tableau et remplacement des "'''print'''" par "'''App.Console.PrintMessage'''"

<strike>ver 1.09 , 04/11/2013 fonctionne parfaitement sur Windows et Linux (cause de l'erreur les caractères : ² ³ ° " ordinal not in range(128)") </strike>

Dans certaines distributions Linux et dans le cas d'une erreur '''"ordinal not in range (128)"''' une autre version existe sur cette page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]

*ver 1.08 , 24/10/2013 correction de l'affichage dans le fichier des "Faces" et "Edges" haut dessus de 100 objets
*ver 1.07 , 11/10/2013 correspondance des "Faces" et de leurs coordonnées.
*ver 1.06 , 22/09/2013 correspondances des "Edges" et de leurs coordonnées, inclinaison sur l'élément plutôt que sur l'objet global
*ver 1.05 , 17/09/2013 ajout d'un icône pour le tableur, conversion en tonneau fr, affichage des dimensions hors tout à la place des coordonnées.
*ver 1.04 , 11/09/2013: lecture du fichier et affichage directement dans un tableau
*ver 1.03 , 09/09/2013: affichage plus clair dans Vue rapport et remplacement par  "typeObject = sel[0].Shape.ShapeType"
*ver 1.02 , 7/09/2013 : petites mises au point
*ver 1.00 , 6/09/2013
 h italiano (it)*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"

*ver 1.21-2.01 (1.21-rmu) 11/06/2019 rmu replace all characters over 127 in ex: "°" in chr(176))    #degree

ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"

ver 1.21 , 16/04/2019 optimization for Py 3... Qt 5...  FreeCAD 0.15 to 0.19 release

ver 1.20 , 29/01/2018 optimization

ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation

ver 1.18 , 19/12/2017 ...

ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"

ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo

ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], and create plane, axis, point, and add options separator for spreadsheet 

ver 1.16 , 21/06/2017 aggiunto controllo della altezza della pollice (qui PointSize 8), casella  di posizione della finestra della macro sinistra o destra  e nuovo sistema di ricerca del imposta mento delle macro<br />

ver 1.15 , 19/12/2015 soppressione PyQt4 option [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 see] , add checkBox for editing infos in report view<br />

ver 1.14 , 04/08/2014 PyQt4 and PySide, corretto tooltip che non funzionava con PySide, aggiunto "fg" 

ver 1.13 , 27/07/2014 sostituzione FCInfo_en_Ver_1-12_Docked.FCMacro con FCInfo_en_Ver_1-13_Docked.FCMacro accetta PyQt4 and PySide

ver 1.12 , 10/03/2014 aggiunto tooltip sopra i pulsanti

ver 1.11 , 04/03/2014 aggiunto µm, nm, pm, fm, µg, ng, pg, percento, correzione dell'errore carat <strike>"cd"</strike> con '''"ct"''',  visualizzazione dell'etichetta e del nome interno, correzione del calcolo degli angoli XY YZ ZX, funzionava bene su un oggetto semplice, ma ha dato un valore sbagliato su un pezzo composto (ha preso altre coordinate ! scoperto confrontando la tabella e le coordinate visualizzate nella sezione inclinazioni), finestra mobile o ancorabile in qualsiasi parte della GUI di FreeCAD<br />

ver 1.10.b, 19/11/2013 pulsanti esterni alla scrollbar e bloccaggio delle dimensioni della finestra

ver 1.10 , 18/11/2013 agggiunto una scrollbar per diminuire la dimensione della finestra

ver 1.08.b 10/10/2013 correzione dell'errore di superficie delle facce elencati nella tabella e sostituzione di "'''print'''" con "'''App.Console.PrintMessage'''" 

<strike>ver 1.09 , 04/11/2013 funziona perfettamente su Windows e Linux (causa dell'errore i caratteri : ² ³ ° " ordinal not in range (128)") </strike>

In alcune distribuzioni Linux e nel caso di un errore '''"ordinal not in range (128)"''' esiste un'altra versione su questa pagina [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]

ver 1.08 , 24/10/2013 correzione della mappa dei titoli "Faces" e "Edges" sopra 100 objeti 

ver 1.07 , 11/10/2013 mappare gli spigoli ("Faces") e le loro coordinate.

ver 1.06 , 22/09/2013 mappare gli spigoli ("Edges") e le loro coordinate, angoli di inclinazione riferiti all'elemento piuttosto che all'oggetto globale

ver 1.05 , 17/09/2013 aggiunto un'icona per il foglio di calcolo, conversione in tonneau fr, dà le dimensioni fuori tutto invece di dare le coordinate.

ver 1.04 , 11/09/2013: leggere i dati direttamente in una tabella.

ver 1.03 , 09/09/2013: visualizzazione più chiara nella "vista report" e sostituzione di "typeObject = sel[0].Shape.ShapeType"

ver 1.02 , 7/09/2013 : piccole modifiche

ver 1.0 , 6/09/2013
 h русский (ru)*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
*ver 1.20 , 29/01/2018 optimization
*ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation
*ver 1.18 , 19/12/2017 ...
*ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"
*ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo
*ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], and create plane, axis, point, and add options separator for spreadsheet 
*ver 1.16 , 21/06/2017 add control height police (here PointSize 8) and checkbox for position the window to right or left<br />
*ver 1.15 , 19/12/2015 suppression PyQt4 option [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 see] , add checkBox for editing infos in report view<br />
*ver 1.14 , 04/08/2014 replace PyQt4 and PySide and correct tooltip not displayed cause on PySide and add fg<br />
*ver 1.13 , 27/07/2014 replace FCInfo_en_Ver_1-12_Docked.FCMacro to FCInfo_en_Ver_1-13_Docked.FCMacro accept PyQt4 and PySide<br />
*ver 1.12 , 10/03/2014 adding tooltip<br />
*ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, pourcent, fixed of grandeur carat <strike>"cd"</strike> in '''"ct"''',  display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape,  window dockable in FreeCAD<br />
*ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking<br />
(ver 1.10 , 18/11/2013 create scrollbar)<br />
*ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"'''print'''" by "'''App.Console.PrintMessage'''"<br />
<strike>ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)") </strike><br />
In a Linux distribution and in the case of an error of '''"ordinal not in range (128)"''' an alternative version exists on this page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]<br />
*ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)<br />
*ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.<br />
*ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object<br />
*ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.<br />
*ver 1.04 , 11/09/2013: read the file directly in a table.<br />
*ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"<br />
*ver 1.02 , 7/09/2013 : small updates<br />
*ver 1.00 , 6/09/2013<br />
 h svenska (sv)*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
*ver 1.21-2.01 (1.21-rmu) 11/06/2019 rmu replace all characters over 127 in ex: "°" in chr(176))    #degree
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
* Ver 1.20, 29/01/2018 optimering
* ver 1.19, 20/01/2018 skapa checkbox för att upptäcka alla element i objektet om det är önskat eller inte, makroet är snabbare. Optimering
* ver 1.18, 19/12/2017 ...
* ver 1.17c, 14/12/2017 skapa plan med koordinat ge i ett projekt i annat projekt och ersätt "FCInfo" med "__title__"
* Ver 1.17b, 13/12/2017 liten korrigering ersätter FCTreeView till FCInfo
* ver 1.17, 12/12/2017 lägg till uppgradering Moment of inertia mm och kg av pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro och tröghetsmoment] och skapa plan, axel, punkt och lägg till alternativ separator för kalkylblad
* ver 1.16, 21/06/2017 lägg till kontrollhöjds polis (här PointSize 8) och kryssrutan för att placera fönstret åt höger eller vänster <br />
* ver 1.15, 19/12/2015 suppression PyQt4 alternativ [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 se], lägg till checkbox för att redigera infos i rapportvy <br />
* ver 1.14, 04/08/2014 ersätt PyQt4 och PySide och korrigera verktygstips inte visad orsak på PySide och lägg till fg <br />
* ver 1.13, 27/07/2014 ersätt FCInfo_en_Ver_1-12_Docked.FCMacro till FCInfo_en_Ver_1-13_Docked.FCMacro acceptera PyQt4 och PySide <br />
* ver 1.12, 10/03/2014 lägger till verktygstips <br />
* ver 1.11, 04/03/2014 Lägga till μm, nm, pm, fm, μg, ng, pg, hällande, fast av storhet karat <strike> "cd" </strike> i '' '"ct" , visning av etiketten och internt namn, fast beräkning av vinklar XY YZ ZX kan ge ett fel på en sammansatt form, fönstret dockbart i FreeCAD <br />
* Ver 1.10.b, 19/11/2013 knappar utanför rullningsfältet och dimensionerna i fönstret blockerar <br />
(ver 1.10, 18/11/2013 skapa rullningsfältet) <br />
* ver 1.08.b, 10/11/2013 översättningsenheter på engelska, felkorrigering för att visa området för ansikten som anges i tabellen och ersättning av '''print''' '''App.Console .PrintMessage'''<br />
<strike> ver 1.09, 04/11/2013 fungerar perfekt på Windows och Linux (orsak till fel på Linux karaktärerna: ² ³ ° ordinal inte inom intervallet (128) ") </strike> <br />
I en Linux-distribution och i händelse av ett fel på '' '' ordinär inte inom intervallet (128) finns det en alternativ version på den här sidan [[Macro_FCInfo_Alternate_Linux/sv|Macro_FCInfo_Alternate_Linux]] <br />
* Ver 1.08, 24/10/2013 korrigering av högsta "Faces" och "Edges" som visar 100 objekt (i den sparade filen) <br />
* ver 1.07, 11/10/2013 matchar "Faces" och deras koordinater. <br />
* ver 1.06, 22/09/2013 matchar "Edges" och deras koordinater, lutning på elementet snarare än det globala objektet <br />
* ver 1.05, 17/09/2013 lade till en ikon för kalkylbladet, konverteringskärlet fr, affichage des dimensions overall istället för koordinater. <br />
* ver 1.04, 11/09/2013: läs filen direkt i en tabell. <br />
* ver 1.03, 09/09/2013: tydligare visning i rapport och ersättning med "typeObject = sel [0] .Shape.ShapeType" <br />
* ver 1.02, 7/09/2013: små uppdateringar <br />
* ver 1.00, 6/09/2013 <br />