All translations

Enter a message name below to show all available translations.

Message

Found 6 translations.

NameCurrent message text
 h Deutsch (de)In diesem Tutorial werden wir beschreiben, wie man STL/OBJ-Dateien aus FreeCAD exportiert. Da das Mesh-Format STL/OBJ dimensionslos ist, geht FreeCAD beim Export davon aus, dass die im Modell benutzen Einheiten in mm sind. Falls dies nicht der Fall sein sollte, muss das Modell entsprechend skaliert werden. Ein Weg dazu ist die Nutzung von [[Image:Draft_Scale.svg|24px]] [[Draft Scale/de|Draft Skalieren]].
 h English (en)In this tutorial we will cover how to export STL/OBJ-files from FreeCAD. The mesh-format STL/OBJ is dimensionless; FreeCAD will assume on export that the units used in the model are in mm. If this is not the case you have to scale your model. One way to do this is using [[Image:Draft_Scale.svg|24px]] [[Draft_Scale|Draft Scale]].
 h français (fr)Dans ce tutoriel, nous allons découvrir comment exporter les fichiers de FreeCAD au formats STL/OBJ. Les formats de maillage STL/OBJ n'ont aucune dimension. L'exportation par FreeCAD supposera que l'unité utilisée dans le modèle est exprimée en mm. Si ce n'est pas le cas, vous devez mettre votre modèle à l'échelle. Une façon de le faire est d'utiliser [[Image:Draft_Scale.svg|24px]] [[Draft_Scale/fr|Draft Échelle]].
 h italiano (it)== Introduzione ==
In questo tutorial ci occuperemo di come esportare file STL / OBJ da FreeCAD.
Dato che il formato mesh STL / OBJ è adimensionale, nelle esportazioni FreeCAD assume
che l'unità utilizzata nel modello è il mm.
Se non è così bisogna scalare il modello.
Un modo per farlo è usare [[Image:Draft_Scale.svg|24px]] [[Draft_Scale/it|Scala]] di Draft.
 h polski (pl)W tym poradniku omówimy, jak wykonać eksport plików STL / OBJ z FreeCAD. Format siatki STL / OBJ jest bezwymiarowy. FreeCAD zakłada przy eksporcie, że jednostki użyte w modelu są w mm. Jeśli tak nie jest, należy przeskalować model. Jednym ze sposobów jest użycie narzędzia [[Image:Draft_Scale.svg|24px]]. [[Draft_Scale/pl|Skaluj]] środowiska pracy Rysunek Roboczy.
 h română (ro)== Introducere ==
În acest tutorial vom discuta cum să exportați fișiere STL / OBJ din FreeCAD.
Din moment ce formatul STL / OBJ-ul este compus din ochiuri este adimensional, FreeCAD va presupune că
unitățile utilizate în model sunt în mm.
Dacă nu este cazul, trebuie să vă scalați modelul.