All translations

Enter a message name below to show all available translations.

Message

Found 3 translations.

NameCurrent message text
 h English (en)Click a point on the base of the wall where you wish to place the window. This can be difficult, as the grid lines don't necessarily correspond to the wall edges. Press the '''Q''' key while you have an active snap at a grid intersection, and press it again with an active snap on the bottom of the wall. FreeCAD will create a new snap point where their horizontal/vertical axis intersect. Use this to find a suitable point:
 h français (fr)Cliquez sur un point de la base du mur où vous souhaitez placer la fenêtre. Cela peut être difficile, car les lignes de la grille ne correspondent pas nécessairement aux bords du mur. Appuyez sur la touche '''Q''' pendant que vous avez un accrochage actif à une intersection de la grille, puis appuyez à nouveau avec un accrochage actif sur le bas du mur. FreeCAD créera un nouveau point d'accrochage à l'intersection de leur axe horizontal/vertical. Utilisez ceci pour trouver un point approprié:
 h polski (pl)Kliknij punkt na podstawie ściany, w którym chcesz umieścić okno. Może to być trudne, ponieważ linie siatki nie zawsze pokrywają się z krawędziami ściany. Naciśnij klawisz '''Q''', gdy masz aktywne przyciąganie na przecięciu siatki, i naciśnij go ponownie z aktywnym przyciąganiem na dole ściany. FreeCAD utworzy nowy punkt przyciągania w miejscu przecięcia się ich osi poziomej / pionowej. Użyj tej opcji, aby znaleźć odpowiedni punkt: