All translations

Enter a message name below to show all available translations.

Message

Found 3 translations.

NameCurrent message text
 h English (en)Unfortunately, the CHS preset has only one diameter option of 42mm, which is very thin to support our concrete roof slab. Fortunately, as everything is parametric, it is easy to change the diameter. Expand the new structural object in the tree view, and you will find its profile object, named CHS423. Change its diameter to 12cm and its thickness to 8mm. Now we have a strong enough column. Notice that you can specify units on the fly and switch between 0,8cm and 8mm without issue. FreeCAD will take care of conversion.
 h français (fr)Malheureusement, le préréglage CTS n'a qu'une seule option de diamètre de 42 mm, qui est très mince pour supporter notre dalle de toit en béton. Heureusement, comme tout est paramétrique, il est facile de changer le diamètre. Développez le nouvel objet structurel dans l'arborescence et vous trouverez son objet de profil, nommé CTS423. Changez son diamètre à 12 cm et son épaisseur à 8 mm. Maintenant, nous avons une colonne assez forte. Notez que vous pouvez spécifier des unités à la volée et basculer entre 0,8 cm et 8 mm sans problème. FreeCAD se chargera de la conversion.
 h polski (pl)Niestety, wstępne ustawienia CHS mają tylko jedną opcję średnicy 42mm, która jest bardzo cienka, aby podeprzeć naszą betonową płytę dachową. Na szczęście, ponieważ wszystko jest parametryczne, można łatwo zmienić średnicę. Rozwiń nowy obiekt konstrukcyjny w widoku drzewa, a znajdziesz jego obiekt profilowy o nazwie CHS423. Zmień jego średnicę na 12cm, a grubość na 8mm. Teraz mamy wystarczająco mocny słup. Zauważ, że możesz określać jednostki w locie i przełączać się pomiędzy 0,8cm a 8mm bez problemu. FreeCAD zajmie się konwersją.