Part Module/es
Introducción
Las sólidas capacidades de modelado de FreeCAD se basan en la OpenCASCADE (OCCT), un sistema CAD de calidad profesional que presenta una creación y manipulación avanzada de geometría 3D. El Ambiente de trabajo piezas es una capa que se encuentra en la parte superior de las bibliotecas de la OCCT, que da al usuario acceso a las primitivas y funciones geométricas de la OCCT. Esencialmente todas las funciones de dibujo 2D y 3D en cada banco de trabajo ( Draft, Sketcher, 24px PartDesign, etc.), se basan en estas funciones expuestas por el banco de trabajo de diseño de piezas. Por lo tanto, el Part Workbench se considera el componente central de las capacidades de modelado de FreeCAD.
Los objetos creados con el ambiente de trabajo de piezas son relativamente sencillos; están pensados para ser utilizados con operaciones booleanas (uniones y cortes) para construir formas más complejas. Este paradigma de modelado se conoce como la geometría sólida constructiva (CSG), y era la metodología tradicional usada en los primeros sistemas de CAD. Por otro lado, el Ambiente de trabajo de diseño de piezas proporciona un flujo de trabajo más moderno para construir formas: utiliza un boceto definido paramétricamente, que se extruye para formar un cuerpo sólido básico, que luego se modifica mediante transformaciones paramétricas (edición características), hasta obtener el objeto final.
Los objetos de las partes son más complejos que los objetos de malla creados con el Ambiente de trabajo Mesh, ya que permiten operaciones más avanzadas como operaciones booleanas coherentes, historial de modificaciones y comportamiento paramétrico.
El ambiente de trabajo de piezas es la capa básica que expone las funciones de dibujo de la OCCT a todos los ambientes de trabajo de FreeCAD.
Herramientas
Todas las herramientas se encuentran en el menú Pieza.
Primitivas
Estas son las herramientas para crear primitivas de objetos.
- Caja: Dibuja una caja especificando sus dimensiones
- Cilindro: Dibuja un cilindro especificando sus dimensiones
- Esfera: Dibuja una esfera especificando sus dimensiones
- Cono: Dibuja un cono especificando sus dimensiones
- Toro: Dibuja un toro (anillo) especificando sus dimensiones
- Tubo: dibuja un tubo especificando su radio interno y su radio externo. introduced in version 0.19
- File:Part CreatePrimitives.svg CrearPrimitivos: Una herramienta para crear diversas primitivas geométricas paramétricas.
- ConstructorFormas: Una herramienta para crear formas más complejas a partir de diversas primitiv geométricas paramétricas
Modificando objetos
Estas son las herramientas para modificar los objetos existentes. Permiten seleccionar los objetos a modificar.
- Extrusión: Extruye caras planas de un objeto
- Revolución: Crea un objeto haciendo que gire otro objeto alrededor de un eje
- Simetría: Crea una simetría de los objetos seleccionados alrededor de un plano de simetría dado
- Redondear: Redondea las aristas de un objeto
- Chaflán: Crea un chaflán en las aristas de un objeto
- Superficie reglada:
- Loft: Lofts de un perfil a otro.
- Sweep: Barre uno o más perfiles a lo largo de un camino
- Herramientas relleno:
- 3D Relleno: Construye una forma paralela a cierta distancia del original.
- 2D Relleno: Construye un cable paralelo a cierta distancia del original, o amplía/contrae una cara plana. introduced in version 0.17
- Espesor: Ahueca un sólido, dejando aberturas junto a planos selectas.
- Projection on surface: Project a logo, text or any face,wire,edge to a surface. With the projection part it is possible to create a solid or wire. introduced in version 0.19
- Compound Tools:
- Make compound: Creates a compound from the selected objects.
- Explode Compound: Tool to split up compounds of shapes
- Compound Filter: The CompoundFilter can be used to extract the individual pieces.
- Operaciones Booleanas: Realiza operaciones Booleanas sobre los objetos
- File:Part Union.svg Fusión: Fusión (unión) de dos objetos
- Intersección: Extrae la parte común (intersección) de dos objetos
- Cortar: Corta (resta) un objeto de otro
- Join features: smart booleans for walled objects (e.g., pipes) introduced in version 0.16
- Connect: Connects interiors of objects introduced in version 0.16
- Embed: Embeds a walled object into another walled object introduced in version 0.16
- Cutout: Creates a cutout in a wall of an object for another walled object introduced in version 0.16
- Splitting tools: introduced in version 0.17
- Boolean fragments: makes all the pieces that can be obtained by Boolean operations between objects introduced in version 0.17
- Slice a part: tool to split shapes by intersection with other shapes
- Slice: Splits an object into pieces by intersections with another object introduced in version 0.17
- XOR: removes space shared by even number of objects (symmetric version of Cut) introduced in version 0.17
- Defeaturing: introduced in version 0.18
- Sección: Crea una sección por la intersección de un objeto con un plano de sección
- Secciones transversales...: Crea una o más secciones transversales a través de una forma seleccionada
- Apéndice: el apéndice es una utilidad para unir un objeto a otro.
Medida
File:Part Measure Menu.png Measure: Allows linear and angular measurement between points, edges, and faces.
- Measure Linear allows you to make linear measurements.
- Measure Angular allows you to make angular measurements.
- Measure Refresh updates the measurements on screen.
- Clear All Clears all measurements.
- Toggle All shows or hides all measurements.
- File:Part Measure Toggle 3d.svg Toggle 3D shows or hides 3D measurements.
- Toggle Delta shows or hides delta measurements.
Otras herramientas
- Import: This tool allows you to add a file *.IGES, *.STEP, *.BREP to the current document.
- Export: This tool allows you to export a part object in a *.IGES, *.STEP, *.BREP file.
- BoxSelection: add to the selection the faces of the shapes that are touches by the rectangular selection. introduced in version 0.19
- Shape from Mesh: Creates a shape object from a mesh object.
- Points from mesh: creates a shape object made of points from the mesh. introduced in version 0.19
- Convert to solid: Converts a shape object to a solid object.
- File:Part ReverseShapes.svg Reverse shapes: Flips the normals of all faces of the selected object.
- Create a copy:
- Create simple copy: Creates a simple copy of the selected object.
- Create transformed copy: creates a transformed copy of the selected object. introduced in version 0.19
- Create shape element copy: creates a copy from an element (vertex, edge, face) of the selected object. introduced in version 0.19
- Refine shape: Cleans faces by removing unnecessary lines.
- Check geometry: Checks the geometry of selected objects for errors.
- Appearance: determines appearance of the whole part (color transparency etc.).
- Set colors: assigns colors to part faces.
Preferencias
- Preferences: preferences available for Part Tools (the Part workbench also uses the PartDesign Preferences).
- Import Export Preferences: preferences available for importing from and exporting to different file formats.
- Fine-tuning: some extra parameters to fine-tune Part behavior.
Archivos de guión
See Part scripting.
Tutoriales
- Import from STL or OBJ : How to import STL/OBJ files in FreeCAD
- Export to STL or OBJ : How to export STL/OBJ files from FreeCAD
- Whiffle Ball tutorial : How to use the Part Module
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub