Translations:FreeCAD-Ship s60 tutorial/4/en

From FreeCAD Documentation
Revision as of 21:51, 3 December 2014 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

FreeCAD-Ship works over Ship entities, that must be created on top of provided geometry. Geometry must be a solid, or set of solids, following criteria must be taken into account:

  • All hull geometry must be provided (including symmetric bodies).
  • Starboard geometry must be included at negatives y domain.
  • Origin (0,0,0) point is the Midship section (Midpoint between after and forward perpendicular) and base line intersection.