Draft EinrastenAufArbeitsebene

From FreeCAD Documentation
Revision as of 20:47, 24 April 2019 by Le Loup (talk | contribs) (Created page with "Mit anderen Worten: Es projiziert einen externen Einrastpunkt auf die aktuelle Arbeitsebene.")

Draft Arbeitsebene

Menüeintrag
Entwurf → Objektfang → Arbeitsebene
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Draft Objektfang, Draft Ebene markieren

Beschreibung

Diese Methode platziert immer einen neuen Punkt auf der aktuellen Arbeitsebene, selbst wenn eine andere Einrastmethode verwendet und ein Punkt außerhalb dieser Arbeitsebene ausgewählt wird.

Mit anderen Worten: Es projiziert einen externen Einrastpunkt auf die aktuelle Arbeitsebene.

File:Draft Snap WorkingPlane.png

Snapping the second point of a line to one endpoint of an edge of a body, which is then projected on the XY working plane

Anwendung

  1. Make sure the working plane is set with Draft SelectPlane.
  2. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap WorkingPlane.svg Snap WorkingPlane are turned on.
  3. Optionally turn on any other Draft Snap method.
  4. Choose a Draft tool to draw a shape.
  5. Move the cursor over any line, edge, vertex, or object, like you would do with other snapping methods.
  6. A small white circle will indicate the point on the working plane to which your new point will be attached.
  7. Click to attach your new point.