Draft Slope/ru

From FreeCAD Documentation
Revision as of 21:13, 2 August 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Slope

Системное название
Draft Slope
Расположение в меню
Черчение → Утилиты → Set Slope
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

This tool allows to set the slope (vertical horizontal) of selected wires or lines. By setting a slope value, all vertices after the first one will have their Z value changed so the different segments of the wires or lines will have the given inclination.

The slope value is a tangential value: 0 means horizontal, 1 means 45 degrees upwards, -1 means 45 degrees downwards, 0.577 means 30 degrees up, etc.

How to use

  1. Select one or more Wire or Line objects
  2. Select menu Draft → Utilities → File:Draft Slope.png Set Slope
  3. Set the desired value in the Slope task panel box
  4. Press the OK button