Sketcher: Crea schizzo
Crea Schizzo |
Posizione nel menu |
---|
Part design → Crea uno sketch |
Ambiente |
Sketcher, PartDesign |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Mappa schizzo, Riposiziona schizzo |
Descrizione
Questo strumento crea un nuovo schizzo.
Utilizzo
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Schizzo su un piano già definito
- Selezionare un piano, ad esempio una faccia in un oggetto.
- Avviare lo strumento
Note
Con uno schizzo chiuso si produce una forma piena, un solido. Con uno schizzo aperto si produce una forma vuota, un guscio.
Lo schizzo può essere rimappato su un'altra faccia esistente usando il comando Mappa schizzo.
The sketch can be re-mapped to another already existing face using the Map Sketch - Command
Lo schizzo può essere spostato nello spazio 3D utilizzando Posizionamento.