Insrumentul de construcție al FreeCAD
Instrumentul de construcție FreeCAD build tool sau fcbt este un script python localizat la:
trunc/src/Tools/fcbt.py
Acesta poate fi folosit pentru a simplifica unele sarcini frecvente în construirea, distribuirea și extinderea FreeCAD.
Utilizare
Cu Python corect instalat, fcbt can poate fi invocat prin comanda
python fbct.py
Afișează un meniu, unde puteți selecta următoarele:
FreeCAD Build Tool Usage: fcbt <command name> [command parameter] possible commands are: - DistSrc (DS) Build a source Distr. of the current source tree - DistBin (DB) Build a binary Distr. of the current source tree - DistSetup (DI) Build a Setup Distr. of the current source tree - DistSetup (DUI) Build a User Setup Distr. of the current source tree - DistAll (DA) Run all three above modules - NextBuildNumber (NBN) Increase the Build Number of this Version - CreateModule (CM) Insert a new FreeCAD Module in the module directory For help on the modules type: fcbt <command name> ?
La promptul de introducere introduceți comanda abreviată pe care doriți să o apelați. De exemplu, tastați "CM" pentru crearea unui modul creating a module.
DistSrc
Comanda "DS" creează sursa de distribuire a arborelui sursă curent
DistBin
The command "DB" creates a binary distribution of the current source tree.
DistSetup
The command "DI" creates a setup distribution of the current source tree.
DistSetup
The command "DUI" creates a user setup distribution of the current source tree.
DistAll
The command "DA" executes "DS", "DB" and "DI" in sequence.
NextBuildNumber
The "NBN" command increments the build number to create a new release version of FreeCAD.
CreateModule
The "CM" command creates a new application module.