Siatka: Wiele przekrojów
Siatka: Wiele przekrojów |
Lokalizacja w menu |
---|
Siatki → Cięcie → Przekrój poprzeczny ... |
Środowisko pracy |
Siatka |
Domyślny skrót |
brak |
Wprowadzono w wersji |
- |
Zobacz także |
Przekrój płaszczyzną |
Opis
Polecenie Wiele przekrojów tworzy wiele przekrojów przez obiekty siatki. Przekroje są wykonywane równolegle do jednej z głównych płaszczyzn globalnych (XY, XZ lub YZ). Dla każdego zestawu przekrojów tworzona jest pojedyncza Cecha.
Użycie
- Select one or more mesh objects.
- There are several ways to invoke the command:
- Press the Mesh CrossSections button.
- Select the Meshes → Cutting → Cross-sections.. option from the menu.
- The Cross sections task panel opens.
- The planes that will be used to create the cross sections are indicated in the 3D view, and will be updated based on the task panel inputs.
- Select the Guiding plane:
- XY
- XZ
- YZ
- Specify the Position of the guiding plane from the origin. The default position is based on the center of the bounding box of the selected mesh objects. Choosing a different Guiding plane or toggling the Sections checkbox will reset the Positon to this default value.
- Optionally check the Sections checkbox to create multiple cross sections:
- On both sides: if checked, cross sections are created on both sides of the guiding plane.
- Count: the number of cross sections.
- Distance: the distance between the cross sections. The default value is based on the dimensions of the bounding box, the On both sides option, and the Count value. Changing the Count value will reset the Distance to this default value. Changing the On both sides option will recalculate the Distance (
*2.0
or*0.5
). Note that the input box may be greyed out, but the value can in fact be changed. - Optionally check the Connect edges if distance is less than checkbox and specify a value.
- Press the Apply button to create the set of cross sections.
- Optionally change one or more settings and create additional sets of cross sections.
- Press the OK button or the Cancel button to close the task panel and finish the command.
Właściwości
See: Part Feature.
Środowisko pracy Siatka
- Różności: Import siatki, Eksport siatki, Siatka z kształtu, Utwórz bryłę regularną, Rozwiń siatkę, Rozwiń powierzchnię
- Modyfikacja: Ujednolicenie wektorów normalnych, Odwróć wektory normalne, Wypełnij otworów, Wypełnij interaktywnie otwory, Dodaj element, Usuń elementy, Usuń interaktywnie elementy, Wygładzanie, Uprość przez Gmsh, Uprość, Skala
- Logiczne: Połączenie, Przecięcie, Różnica
- Krojenie: Przetnij, Przytnij, Przytnij siatkę płaszczyzną, Przekrój płaszczyzną, Wiele przekrojów
- Części składowe i segmenty: Scal, Rozbij na komponenty, Utwórz segment siatki, Tworzenie segmentów siatki z najlepiej dopasowanych powierzchni
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework