FEM Afficher les résultats
FEM Afficher les résultats |
Emplacement du menu |
---|
Résultats → Afficher les résultats |
Ateliers |
FEM |
Raccourci par défaut |
R S |
Introduit dans la version |
- |
Voir aussi |
FEM Pipeline de résultats, FEM Tutoriel |
Description
La commande Afficher les résultats ouvre la boîte de dialogue pour un objet résultat FEM. Un objet Result est automatiquement créé lorsqu'une analyse FEM a été effectuée en utilisant le solveur Calculix ou Z88.
A result objects holds the resulting mesh and allows to visualize results. It is designed and therefore limited to thermomechanical results. For these result types the result object can be used as alternative to a result pipeline. A result pipeline can be used to visualize any kind of results (also electrical etc.).
The units used for the result object are those of the set unit system while for a result pipelines the units are SI.
The visualization of the results is only active when the dialog is open. However, the dialog settings are stored in the FreeCAD model file.
Utilisation
- Il existe plusieurs façons d'appeler la commande:
- Appuyez sur le bouton Afficher les résultats.
- Sélectionnez l'option Résultats → Afficher les résultats dans le menu.
- Utilisez le raccourci clavier: R puis S.
When the dialog is open, the result mesh will automatically be shown.
The dialog is shown at the left and offers the following features:
- Select a result type and the minimum and maximum will be displayed in the dialog. The result mesh will be colored accordingly.
- Click on the button Histogram to get a histogram what amount of result mesh nodes have a certain result. The histogram plot can be modified by the buttons in its toolbar. it is also possible to save the histogram as image using the save button from its toolbar.
- Check the option Show to enables the slider and to visualize the result mesh deformation. The slider value is a factor with which the result Displacement Magnitude is multiplied.
Note: The slider only affects the Displacement Magnitude, not its X, Y, Z components.
- With the button Calculate you can perform calculations of the results. Input in the text box below the button an equation of you choice. Predefined is the equation P1-P3. This means the result Min Principal Stress is subtracted from the Max Principal Stress. The variables for the possible results are explained in the box Hints user defined equations.
After you input an equation press the button and the result will be shown in the fields displaying the minimum and maximum. The result mesh will be colored accordingly.
Note: The calculation results always have the unit MPa, mm or T, no matter what unit system you use.
- Matériaux : Solide, Fluide, Mécanique non linéaire, Renforcé (type béton) ; Éditeur de matériaux
- Géométrie de l'élement : Poutre (1D), Rotation de poutre (1D), Coque (2D), Section fluide (1D)
Contraintes
- Électromagnétique : Potentiel électrostatique, Densité de courant, Magnétisation
- Géometrique : Rotation plane, Empreinte de section, Transformation
- Mécanique : Immobilisation, Déplacement, Contact, Liaison, Ressort, Force, Pression, Centrifuge, Poids propre
- Thermique : Température initiale, Flux de chaleur, Température, Source thermique
- Remplacer les Constantes : Permittivité du vide
- Maillage : Maillage Netgen, Maillage GMSH, Couche limite de maillage, Région de maillage, Groupe de maillage, Ensemble de nœuds, Maillage à maillage
- Solveur : CalculiX Standard, Elmer, Mystran, Z88 ; Équations : Déformation, Élasticité, Électrostatique, Force électrique, Magnétodynamique, Magnétodynamique 2D, Écoulement, Flux, Chaleur ; Solveur : Réglage du solveur, Calcul du solveur
- Résultats : Purger, Afficher ; Postprocessing : Appliquer les modifications, Pipeline du résultat, Filtre des déformations, Filtre d'écrêtage scalaire, Filtre de fonction de découpe, Filtre d'écrêtage selon une région, Filtre par contours, Filtre d'écrêtage selon une ligne, Graphique de linéarisation des critères, Données du filtre d'écrêtage du point, Filtre fonction plan, Filtre fonction sphère, Filtre fonction cylindre, Filtre fonction boîte
- Utilitaires : Plan de coupe, Supprimer les plans de coupe, Exemples ; Supprimer le maillage, Affichage des informations du maillage
- Additionnel : Préférences ; Installation, FEM Maillage, Solveur, CalculiX, FEM Béton ; FEM Types d'élements
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test