PartDesign Аддитивный Эллипсоид
Аддитивный эллипсоид |
Системное название |
---|
PartDesign_AdditiveEllipsoid |
Расположение в меню |
Part Design → Создать аддитивный примитив → Аддитивный эллипсоид |
Верстаки |
PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Создать аддитивный примитив |
Описание
Inserts a primitive ellipsoid in the active Body as the first feature, or fuses it to the existing feature(s).
Применение
- Press the Additive Ellipsoid button. Note: the Additive Ellipsoid is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get to the Ellipsoid button, click on the down arrow besides the visible icon and select Additive Ellipsoid in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- An Ellipsoid feature appears under the active Body.
Опции
The Ellipsoid can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Свойства
- ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
- ДанныеLabel: label given to the Ellipsoid object. Change to suit your needs.
- ДанныеRadius1: the radius value along the ellipsoid's vertical axis; by default, parallel to the Z-axis.
- ДанныеRadius2: the radius value along the ellipsoid's length; by default, parallel to the X-axis.
- ДанныеRadius3: the radius value along the ellipsoid's width; by default, parallel to the Y-axis. At the default value of zero, the ellipsoid forms an oblate spheroid. This has the same form as if Radius3 is identical to Radius2.
- ДанныеAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the ellipsoid, parallel to the circular cross section (-90 degrees in a full spheroid)
- ДанныеAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full spheroid).
- ДанныеAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the elliptical cross section (360 degrees in a full spheroid).
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework