Projekt Części: Odejmowanie wyciągnięciem przez profile
PartDesign SubtractiveLoft |
Menu location |
---|
Part Design → Create a substractive feature → Subtractive loft |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
PartDesign Additive loft, PartDesign Subtractive pipe |
Description
Subtractive Loft creates a subtractive solid in the active Body by making a transition between two or more sketches (also referred to as cross-sections). Its shape is then subtracted from the existing solid.
Usage
Dialog-based workflow
- Press the Subtractive loft button.
- In the Select feature dialog, select a sketch to be used as base profile object and click OK.
- Alternatively, either a single sketch or the face of a 3D object (introduced in version 0.20) can be selected prior to pressing the subtractive loft button.
- In the Loft parameters, press the Add Section button.
- Select the next sketch in the 3D view. Repeat to select more sketches in the order you want them to be lofted through. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.introduced in version 0.19)
- Set options if needed and click OK.
Selection-based workflow
- Select several sketches. It is hereby important in what order you select them:
- The sketch selected at first will become the base profile object in the next step
- The sketches selected after the first one will become the loft sections. Also here the selection order is important: The sketch selected as second will become the first loft section, the one selected as third becomes the second section and so on. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.introduced in version 0.19)
- The first or last selection can also be a face of a 3D object (introduced in version 0.20)
- Press the Subtractive loft button.
- Set options if needed and click OK.
Options
- Ruled surface: makes straight transitions between cross-sections. Does not apply to a loft with two cross-sections. If not checked, transitions will be smooth.
- Closed: makes a transition from the last cross-section to the first, creating a loop.
Properties
- DANELabel: name given to the operation, this name can be changed at convenience.
- DANESections: lists the sections used.
- DANERuled: see Options.
- DANEClosed: see Options.
- DANEMidplane: N/A
- DANEReversed: N/A
- DANERefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
Notes
- To better control the shape of the loft, it is recommended that all cross-sections have the same number of segments. For example, for a loft between a rectangle and a circle, the circle should be broken down into 4 connected arcs.
- You can loft from or toward a single vertex from a sketch or the body. introduced in version 0.20
- Vertices can in most cases only be the start or end of a loft.
- A cross-section cannot lie on the same plane as the one immediately preceding it.
- If the sketch has inner geometry, i.e. the loft is supposed to have holes, then the order in which the sketch geometry is created, should be the same for all sections: Either start all sections with the inner geometry or start them all with the outer. Otherwise an invalid loft can be created where inner and outer walls cross.
- It is not possible to loft disjoint or crossing loops.
Links
- Part Loft Technical Details explains how a Part Loft is created, much of its content is relevant to the PartDesign Subtractive loft.
środowisko pracy Projekt Części
- Narzędzia struktury: Część, Grupa
- Narzędzia wspomagające: Utwórz zawartość, Nowy szkic, Edycja szkicu, Mapuj szkic na ścianę, Sprawdź poprawność szkicu , Sprawdź geometrię, Łącznik kształtów podrzędnych, Utwórz klona, Płaszczyzna odniesienia, Linia odniesienia, Punkt odniesienia, Lokalny układ współrzędnych
- Narzędzia do modelowania
- Narzędzia addytywne: Wyciągnięcie, Wyciągnij przez obrót, Wyciągnięcie przez profile, Wyciągnięcie po ścieżce, Addytywna helisa, Addytywny sześcian, Addytywny walec,Addytywna sfera, Addytywny stożek, Addytywna elipsoida, Addytywny torus, Addytywny graniastosłup, Addytywny klin
- Narzędzia subtraktywne: Kieszeń, Otwór, Rowek, Subtraktywne wyciągnięcie przez profile, Subtraktywne wyciągnięcie po ścieżce, Subtraktywna helisa, Subtraktywny sześcian, Subtraktywny walec, Subtraktywna sfera, Subtraktywny stożek, Subtraktywna elipsoida, Subtraktywny torus,Subtraktywny graniastosłup, Subtraktywny klin
- Narzędzia operacji logicznych Funkcje logiczne
- Narzędzia ulepszające: Zaokrąglenie, Fazka, Pochylenie ścian, Grubość
- Narzędzia do transformacji: Odbicie lustrzane, Szyk liniowy, Szyk kołowy, Transformacja wielokrotna, Skaluj
- Dodatki: Przenieś, Koło łańcuchowe, Koło zębate ewolwentowe, Kreator projektowania wału
- Narzędzia menu kontekstowego: Ustaw czubek, Przenieś cechę, Przenieś cechę w drzewie, Wygląd zewnętrzny, Ustaw kolor
- Preferencje: Ustawienia, Dostrajanie parametrów
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework