Arch Partie de bâtiment
Arch Partie de bâtiment |
Emplacement du menu |
---|
Arch → Partie de bâtiment |
Ateliers |
Arch |
Raccourci par défaut |
Aucun |
Introduit dans la version |
0.18 |
Voir aussi |
Arch Bâtiment, Arch Site |
Description
BuildingPart (Partie de bâtiment) remplace les anciens Arch Planchers et Arch Bâtiment par une version plus performante qui peut être utilisée non seulement pour créer un étage/un niveau/des niveaux mais également pour toutes sortes de situations dans lesquelles différents objets Arch/BIM doivent être groupés. Ce groupe pourra être traité comme un seul objet ou répliqué.
Utilisation
- En option, vous pouvez également sélectionner un ou plusieurs objets à inclure dans votre nouvelle pièce de construction.
- Appuyez sur le bouton Créer un objet Partie de bâtiment....
Remarques
Les Partie de bâtiment ont un Arch Plan de section implicite intégré. introduit dans la version 0.19
Ce plan est toujours parallèle au plan de base du BuildingPart, mais vous pouvez spécifier le décalage entre eux. Ainsi, tous les outils qui fonctionnent avec un plan de coupe, tels que Draft Vue 2D d'une forme et TechDraw Vue Aarchitecturale fonctionnent également avec Parties de bâtiment.
Options
- Après avoir créé une Partie de bâtiment, vous pouvez ajouter d'autres objets à celui-ci en les faisant glisser dans la vue en arborescence ou en utilisant l'outil Arch Ajouter.
- Vous pouvez supprimer des objets d'une Partie de bâtiment en les faisant glisser dans l'arborescence ou en utilisant l'outil Arch Soustraire.
- En double-cliquant sur l'objet Partie de bâtiment dans la vue arborescente, le Draft Plan de travail sera défini sur son emplacement et la Partie de bâtiment deviendra active, ce qui signifie que de nouveaux objets lui seront automatiquement ajoutés. Double-cliquez à nouveau sur la Partie de bâtiment pour la désactiver et ramener le plan de travail à sa position précédente. (dans la version 0.19, pour être disponible, cette option doit être définie sur true, dans le panneau Propriété - Interaction - Double-cliquer pour active).
- La Partie de bâtiment peut afficher une marque dans la vue 3D avec une étiquette et une indication de niveau.
- Lorsqu'un élément Partie de bâtiment est déplacé/pivoté, tous ses enfants qui ne possèdent pas de propriété DonnéesMove With Host ou qui l'ont activé sont déplacés/pivotés ensemble.
- Les Parties de bâtiment peuvent être Draft Clonées.
- Les Parties de bâtiment peuvent prendre n’importe quel type d’IFC. Leur propriété IFC Type détermine son utilisation. Si vous la définissez sur Building Storey, ce sera comme un niveau. Si vous la définissez sur Building, ce sera comme un bâtiment et si vous la définissez sur Element Assembly, ce sera comme un assemblage. Son icône changera pour refléter ce paramètre mais à part cela, cela n’a aucun autre impact dans FreeCAD. Toutefois, le fait d'être exporté vers IFC sous un type ou un autre peut avoir un impact sur d'autres applications BIM.
- Les Parties de bâtiment permettent de définir une boîte de capture de groupe automatique. Les objets Draft et Arch suivants, ou tout autre objet qui utilise Draft.autogroup(), seront automatiquement ajoutés à cet objet Partie de bâtiment s'ils se trouvent entièrement à l'intérieur de la boîte de capture. introduit dans la version 0.20
Propriétés
Voir aussi : Éditeur de propriétés
An Arch BuildingPart is derived from an App GeoFeature object and inherits all its properties. It also has the following additional properties:
Data
Base
- DonnéesGroup (
LinkList
): List of referenced objects.
- Données (Hidden)_ Group Touched (
Bool
)
Building Part
- DonnéesArea (
Area
): The computed floor area of this floor.
- DonnéesHeight (
Length
): The height of this object, and of its children objects. The children objects could be, for example, Arch Walls. Each wall's height must be set to0
(zero), so the height property of the BuildingPart propagates to the objects inside of it.
- DonnéesLevel Offset (
Length
): The level of the (0,0,0) point of this level. This value is added to thePlacement.Base.z
attribute of the BuildingPart, to indicate a vertical offset without actually moving the object. The resulting offset is displayed if VueShow Level istrue
.
- Données (Hidden)Materials Table (
Map
): A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files.
- DonnéesOnly Solids (
Bool
): If true, only solids will be collected by this object when referenced from other files.
- Données (Hidden)Saved Inventor (
FileIncluded
): This property stores an inventor representation for this object.
- Données (Hidden)Shape (
PartShape
): The shape of this object.
Children
- DonnéesHeight Propagate (
Bool
): If true, the height value propagates to contained objects.
IFC
- Données (Hidden)Ifc Data (
Map
): IFC data.
- Données (Hidden)Ifc Properties (
Map
): IFC properties of this object.
- DonnéesIfc Type (
Enumeration
): The IFC type of this object.
IFC Attributes
- DonnéesDescription (
String
): An optional description for this component
- DonnéesGlobal Id (
String
)
- DonnéesObject Type (
String
)
- DonnéesOverall Height (
Length
)
- DonnéesOverall Width (
Length
)
- DonnéesPartitioning Type (
Enumeration
)
- DonnéesPredefined Type (
Enumeration
)
- DonnéesTag (
String
): An optional tag for this component.
- DonnéesUser Defined Partitioning Type (
String
)
View
Auto Group
- VueAutogroup Autosize (
Bool
): Automatically set the capture box size from the Building Part contents. introduced in version 0.20
- VueAutogroup Box (
Bool
): Turns auto grouping (and the display of the capture box) on/off. introduced in version 0.20
- VueAutogroup Margin (
Length
): A margin to use when autosize is turned on. introduced in version 0.20
- VueAutogroup Size (
IntegerList
): The capture box for newly created objects expressed as [XMin,YMin,ZMin,XMax,YMax,ZMax]. introduced in version 0.20
Building Part
- Vue (Hidden)Diffuse Color (
ColorList
): The individual face colors.
- VueDisplay Offset (
Placement
): A transformation to apply to the level mark.
- VueFont Name (
Font
): The font to be used for texts.
- VueFont Size (
Length
): The font size of texts.
- VueLine Width (
Float
): The line width of this object.
- VueOrigin Offset (
Bool
): If true, when activated, Display offset will affect the origin mark too.
- VueOverride Unit (
String
): An optional unit to express levels.
- VueShow Label (
Bool
): If true, when activated, the object's label is displayed.
- VueShow Level (
Bool
): If true, show the level.
- VueShow Unit (
Bool
): If true, show the unit on the level tag.
Children
- VueChildren Line Color (
Color
): The line color to apply to the children of this Building Part.
- VueChildren Line Width (
Float
): The line width to apply to the children of this Building Part.
- VueChildren Override (
Bool
): If true, the objects contained in this Building Part will adopt these line, color and transparency settings.
- VueChildren Shape Color (
Color
): The shape color to apply to the children of this Building Part.
- VueChildren Transparency (
Percent
): The transparency to apply to the children of this Building Part.
Clip
- VueAuto Cut View (
Bool
): Turn cutting on when activating this level.
- VueCut Margin (
Length
): The distance between the level plane and the cut line.
- VueCut View (
Bool
): Cut the view above this level.
Interactions
- VueAuto Working Plane (
Bool
): If set to True, the working plane will be kept on Auto mode.
- VueDouble Click Activates (
Bool
): If True, double-clicking this object in the tree activates it.
- VueRestore View (
Bool
): If set, the view stored in this object will be restored on double-click.
- VueSave Inventor (
Bool
): If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode.
- Vue (Hidden)Saved Inventor (
FileIncluded
): A slot to save the inventor representation of this object, if enabled.
- VueSet Working Plane (
Bool
): If true, when activated, the working plane will automatically adapt to this Building Part.
- Vue (Hidden)View Data (
FloatList
): Camera position data associated with this object.
Scripting
Script
Voir aussi: Arch API et FreeCAD Scripts de Base.
L'outil BuildingPart peut être utilisé à l'intérieur d'une macro, et à partir de la console Python en utilisant la fonction suivante :
BuildingPart = makeBuildingPart(objectslist=None)
- Crée un objet
BuildingPart
à partir deobjectslist
qui est une liste d'objets.
Exemple :
import FreeCAD, Draft, Arch
p1 = FreeCAD.Vector(0, 0, 0)
p2 = FreeCAD.Vector(2000, 0, 0)
baseline = Draft.makeLine(p1, p2)
baseline2 = Draft.makeLine(p1, -1*p2)
Wall1 = Arch.makeWall(baseline, length=None, width=150, height=2000)
Wall2 = Arch.makeWall(baseline2, length=None, width=150, height=1800)
FreeCAD.ActiveDocument.recompute()
BuildingPart = Arch.makeBuildingPart([Wall1, Wall2])
Floor = Arch.makeFloor([BuildingPart])
Building = Arch.makeBuilding([Floor])
Site = Arch.makeSite(Building)
FreeCAD.ActiveDocument.recompute()
- Éléments : Mur, Structure, Mur-rideau, Fenêtre, Toiture, Espace, Escalier, Équipement, Ossature, Clôture, Treillis, Profilé, Conduite, Raccord
- Renforcements : Armature droite, Armature en U, Armature en L, Armature en étrier, Armature cintrée, Armature hélicoïdale, Rebar Armature en colonne, Rebar Poutre, Rebar Renfort de dalle, Rebar Renfort de semelle, Armature personnalisée
- Panneaux : Panneau, Découpe de panneau, Feuille de panneaux, Calepinage
- Matériaux : Matériau, Matériaux multiples
- Organisations : Partie de bâtiment, Projet, Site, Bâtiment, Étage, Référence externe, Plan de coupe, Nomenclature
- Axes : Axes, Système d'axes, Grille
- Modifications : Couper suivant un Plan, Ajouter un composant, Enlever un composant, Prendre des cotes
- Utilitaires : Composant, Cloner un composant, Diviser un maillage, Maillage vers une forme, Sélection de maillages non-manifold, Supprimer la forme, Fermer les trous, Fusionner des murs, Vérification, Bascule marqueur Brep IFC, Explorateur IFC, 3 vues depuis un maillage, Tableur IFC, Bascule des sous composants
- Additionnels : Préférences, Préférences Import-Export (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test