PartDesign Аддитивный Клин
PartDesign AdditiveWedge |
Menu location |
---|
Part Design → Create an additive primitive → Additive Wedge |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
PartDesign Create an additive primitive, PartDesign Subtractive Wedge |
Description
Inserts a primitive wedge in the active Body as the first feature, or fuses it to the existing feature(s).
Usage
- Press the Additive Wedge button. Note: the Additive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Additive Wedge in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Wedge feature appears under the active Body.
Options
The Wedge can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Properties
Using the default placement, the below inputs are:
- ДанныеX min/max : Base face X axis span
- ДанныеY min/max: Wedge height span
- ДанныеZ min/max : Base face Z axis span
- ДанныеX2 min/max : Top face X axis span
- ДанныеZ2 min/max : Top face Z axis span
Pyramids
Wedges can be used to create pyramids by setting ДанныеX2 min/max and ДанныеZ2 min/max each so that min = max.
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework