Sketcher DuchmesserFestlegen
Sketcher ConstrainDiameter |
Menu location |
---|
Sketch → Sketcher constraints → Constrain diameter |
Workbenches |
Sketcher |
Default shortcut |
None |
Introduced in version |
- |
See also |
Constrain distance, Constrain horizontal distance, Constrain vertical distance |
Beschreibung
Diese Beschränkung beschränkt den Wert des Durchmessers eines Kreises oder Bogens auf einen bestimmten Wert. Wenn mehr als ein Kreis oder Bogen ausgewählt wird, bevor der Befehl gestartet wird, wird eine Abfrage angezeigt, ob alle ausgewählten Elemente den gleichen Durchmesser haben sollen. Im Falle einer bejahenden Antwort wird eine Durchmesserbeschränkung hinzugefügt, und gleiche Länge Beschränkungen werden allen Elementen hinzugefügt. Im negativen Fall werden separate Durchmesser Bedingungen für jeden Kreis/Bogen erstellt, jedoch mit gleichen Werten, die nach der Erstellung separat bearbeitet werden müssen.
How to use
- Pick one or more circles or arcs.
- Press the Constrain diameter button.
- A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
- Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.
Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.