Draft Angle
Draft Angle |
Системное название |
---|
Draft Angle |
Расположение в меню |
Черчение → Привязка → Углы |
Верстаки |
Draft, Arch |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Описание
Защелкивается к специальным краям точек кругов и дуг, при 45 ° и 90 °.
Use
- Make sure snap mode is turned on
- Choose element to be inserted into the FreeCAD-document
- Move cursor near one of the cardinal point you wish to attach your element to
- Below on the right side of the cursor the symbol of the snap mode will appear
- Click to attach your element to the selected endpoint of target element
Will also work with Draft Move and Draft Rotate.
Notes
Snap mode can be used with
- sketcher elements (arcs, circles)
- draft elements (arcs, circles)
- edge of circular face of shape
- edge of circular face of solid
Clicking on the snap-mode icon will toggle the snap mode on/off.