FEM: Vincolo contatto
Vincolo contatto |
Posizione nel menu |
---|
FEM → Vincolo contatto |
Ambiente |
FEM |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Tutorial di FEM |
Descrizione
Crea un vincolo FEM di contatto tra 2 superfici.
Uso
- Cliccare su File:Fem ConstraintContact.png o usare FEM → File:Fem ConstraintContact.png Vincolo contatto dal menu principale.
- Selezionare la faccia principale (master).
- Selezionare la faccia secondaria (slave).
- Inserire la rigidezza del contatto.
- Inserire il coefficiente di attrito.
Limitations
- The contact constraint can only be applied to two faces.
Notes
- The contact stiffness should be 10 times the young's modulus of the material for hard contact. The higher the value for contact stiffness, the harder the contact between surfaces.
- The slave face is the face which penetrates into the master face, and therefore experiences more deformation.
- The *CONTACT PAIR card is used for modeling contact in CalculiX. The constraint uses Face-to-Face penalty contact and the contact formulation is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html