Macro CartoucheFC Full
File:Text-x-python Macro_CartoucheFC_Full |
Description |
---|
This macro is a complete application, it allows to fill the cartridge of the drawing sheet with full editabletext. Macro version: 00.06 (13/10/2016) Author: Mario52 |
Author |
Mario52 |
Download |
None |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
00.06 (13/10/2016) |
Date last modified |
None |
FreeCAD Version(s) |
None |
Default shortcut |
None |
See also |
None |
This macro is a complete application, it allows to fill simply all the fields of the cartridge
Choice in the page Misc_templates_Full
Here the order of filling in the line FreeCAD texteditable. The date and time fields are separated by a "space negative space" " - " and constitute a single line textedit.
Use
PS: Some characters such as & $ are not accepted (and possibly other special characters).
If you have any questions or want to add a function, you can address you on the french forum Remplir cartouche
- The window remains above other Windows, thereby controlling the cartridge without leaving the program.
- Copy the code into a file named Macro_CartoucheFC_Full.FCMacro and place it in your usual macros directory.
- After you have created your drawing sheet using the Drawing of FreeCAD module, run the macro Macro_CartoucheFC_Full.
- At the opening, the program will register in memory all data already present in the cartridge of the sheet (if they are filled), all these data will be automatically returned to using the button Memo and kept in memory until the closure of the programme.
- Date button D. and time H. displayed the date and time of the system.
- The date format depends on the selected symbol EU or US which determines the regional format. Change does not happen automatically (for the case or you have entered a date manually) you must again click buttons dates if you change the symbol (check before printing).
- Choice your format page
- Button Symbole EU or US change the meaning of the symbol of projection "Select your Symbol" is displayed by default, and then the active symbol appears. Click on the button and check the leaf symbol, click a second time to modify the symbol.
- The choice of this symbol, affects the date format EU = dd/MM/yyyy and US = MM/dd/yyyy.
- Attention: this command does not pass through the button Apply and immediately changes the symbol to each presses on the key, always check if you have the appropriate symbol on your worksheet.
- Button Clean Clears all fields in the cartridge. You can revert to the original data using the button Memo.
- Button Apply saves all fields of the cartridge in the sheet. You can revert to the original data using the button Memo (except for the regional symbol that works in independent and is effective immediately).
Code
Macro_CartoucheFC_Full.FCMacro
# -*- coding: utf-8 -*-
"""
***************************************************************************
* Copyright (c) 2014 2016 2017 <mario52> *
* *
* This file is a supplement to the FreeCAD CAx development system. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL) *
* as published by the Free Software Foundation; either version 2 of *
* the License, or (at your option) any later version. *
* for detail see the LICENCE text file. *
* *
* This software is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this macro; if not, write to the Free Software *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
* USA *
***************************************************************************
* WARNING! All changes in this file will be lost and *
* may cause malfunction of the program *
***************************************************************************
"""
#OS: Windows 10
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.16.6706 (Git)
#Build type: Release
#Branch: releases/FreeCAD-0-16
#Hash: f86a4e411ff7848dea98d7242f43b7774bee8fa0
#Python version: 2.7.8
#Qt version: 4.8.7
#Coin version: 4.0.0a
#OCC version: 6.8.0.oce-0.17
__title__ = "Macro_CartoucheFC_Full"
__author__ = "Mario52"
__url__ = "http://www.freecadweb.org/index-fr.html"
__Wiki__ = "http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC_Full"
__version__ = "00.07"
__date__ = "05/02/2017"
__Requires__ = ("all version and freecad 0.17 for use the shape Symbol" +
" DESIGNED_BY, CREATION_DATE, CHECKED_BY, CHECK_DATE, SIZE, SCALE, WEIGHT, DRAWING_NUMBER, SHEET, " +
" TITLE, DESCRIPTION, COMPANY, COPYRIGHT, Note_A, Note_B, Note_C, Note_D, Note_E, Note_F, Note_G, Note_H, Note_I" )
__Template__ = " A3_Landscape_xx_FULL.svg, A3_Portrait_xx_FULL, A4_Landscape_xx_FULL.svg, A4_Portrait_xx_FULL"
__Template_Link__ = "http://www.freecadweb.org/wiki/index.php?title=Misc_templates_Full"
import PySide
from PySide import QtCore, QtGui
import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base
def utf8(unio):
return unicode(unio).encode('UTF8')
global path
#path = FreeCAD.ConfigGet("AppHomePath")
path = FreeCAD.ConfigGet("UserAppData")
global PageActive ;PageActive = "Page" # page active
global DESIGNED_BY ;DESIGNED_BY = "" # lineEdit01 DESIGNED_BY
global CREATION_DATE ;CREATION_DATE = "" # lineEdit02 CREATION_DATE date
global CREA_DATE ;CREA_DATE = "" # lineEdit02h date
global CREA_TIME ;CREA_TIME = "" # lineEdit02h heure
global CHECKED_BY ;CHECKED_BY = "" # lineEdit03
global CHECK_DATE ;CHECK_DATE = "" # lineEdit04 date
global CHEC_DATE ;CHEC_DATE = "" # lineEdit04 date
global CHEC_TIME ;CHEC_TIME = "" # lineEdit04h heure
global SIZE ;SIZE = "" # lineEdit05
global SCALE ;SCALE = "" # lineEdit06
global WEIGHT ;WEIGHT = "" # lineEdit07
global DRAWING_NUMBER ;DRAWING_NUMBER = "" # lineEdit08
global SHEET ;SHEET = "" # lineEdit09
global TITLE ;TITLE = "" # textEdit_01
global DESCRIPTION ;DESCRIPTION = "" # textEdit_02
global COMPANY ;COMPANY = "" # textEdit_02b
global COPYRIGHT ; COPYRIGHT = "" # lineEdit_20
global Note_A ; Note_A = "" # lineEdit_10
global Note_B ; Note_B = "" # lineEdit_11
global Note_C ; Note_C = "" # lineEdit_12
global Note_D ; Note_D = "" # lineEdit_13
global Note_E ; Note_E = "" # lineEdit_14
global Note_F ; Note_F = "" # lineEdit_15
global Note_G ; Note_G = "" # lineEdit_16
global Note_H ; Note_H = "" # lineEdit_17
global Note_I ; Note_I = "" # lineEdit_18
global SymbolSwitch ; SymbolSwitch = 0 #
global ui ; ui = ""
def heure():
return QtCore.QTime().currentTime().toString('hh:mm:ss')
def dateEu():
return QtCore.QDate().currentDate().toString('dd/MM/yyyy') # forme euro
def dateUK():
return QtCore.QDate().currentDate().toString('yyyy/MM/dd') # forme UK
def dateUs():
return QtCore.QDate().currentDate().toString('MM/dd/yyyy') # forme US
def dateComp():
return QtCore.QDate().currentDate().toString('dddd d MMMM yyyy') # Retourne "dimanche 20 Juillet 77"
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s
try:
_encoding = QtGui.QApplication.UnicodeUTF8
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig)
def errorDialog(msg):
diag = QtGui.QMessageBox(QtGui.QMessageBox.Critical,u"Error Message",msg)
diag.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenêtre en avant
diag.exec_()
def symbol_EU(depx, depy, scale): #symbol_EU =O
global PageActive
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
except:
None
App.activeDocument().addObject('Sketcher::SketchObject','Symbol_EU')
App.activeDocument().Symbol_EU.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(0.0,0.0,0.0,1.0))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(-7.5,0.0,0.0),App.Vector(20.0,0.0,0.0)))
App.ActiveDocument.Symbol_EU.Placement = App.Placement(App.Vector(0.0,0.0),App.Rotation(0.0,0.0,0.0,1.0))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(12.50,-7.5,0),App.Vector(12.50,7.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Circle(App.Vector(12.50,0.0,0),App.Vector(0,0,1),2.5))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Circle(App.Vector(12.50,0.0,0),App.Vector(0,0,1),5.0))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,5.0,0.0),App.Vector(-5.0,2.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(-5.0,-2.5,0.0),App.Vector(-5.0,2.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,-5.0,0.0),App.Vector(-5.0,-2.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,-5.0,0.0),App.Vector(5.0,5.0,0.0)))
Gui.getDocument(App.ActiveDocument.Name).resetEdit()
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").LineColor = (0.0,0.0,0.0)
App.ActiveDocument.recompute()
App.activeDocument().addObject('Drawing::FeatureViewPart','SymbolEU')
App.activeDocument().SymbolEU.Source = App.activeDocument().Symbol_EU
App.activeDocument().SymbolEU.Direction = (0.0,0.0,1.0)
App.activeDocument().SymbolEU.X = depx
App.activeDocument().SymbolEU.Y = depy
App.activeDocument().SymbolEU.Scale = scale #0.8 # A3
#ori App.activeDocument().Page.addObject(App.activeDocument().SymbolEU)
PageActive = unicode(PageActive)
App.activeDocument().getObjectsByLabel(PageActive)[0].addObject(App.activeDocument().SymbolEU)
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False
App.ActiveDocument.recompute()
def symbol_US(depx, depy, scale): #symbol_US O=
global PageActive
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
except:
None
App.activeDocument().addObject('Sketcher::SketchObject','Symbol_US')
App.activeDocument().Symbol_US.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(0.0,0.0,0.0,1.0))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(-7.5,0.0,0.0),App.Vector(20.0,0.0,0.0)))
App.ActiveDocument.Symbol_US.Placement = App.Placement(App.Vector(0.0,0.0),App.Rotation(0.0,0.0,0.0,1.0))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(0.0,-7.5,0.0),App.Vector(0.0,7.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Circle(App.Vector(0.0,0.0,0.0),App.Vector(0,0,1),2.5))
App.ActiveDocument.Symbol_US.addGeometry(Part.Circle(App.Vector(0.0,0.0,0.0),App.Vector(0,0,1),5.0))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,5.0,0.0),App.Vector(7.5,2.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(7.5,-2.5,0.0),App.Vector(7.5,2.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,-5.0,0.0),App.Vector(7.5,-2.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,-5.0,0.0),App.Vector(17.5,5.0,0.0)))
Gui.getDocument(App.ActiveDocument.Name).resetEdit()
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").LineColor = (0.0,0.0,0.0)
App.ActiveDocument.recompute()
App.activeDocument().addObject('Drawing::FeatureViewPart','SymbolUS')
App.activeDocument().SymbolUS.Source = App.activeDocument().Symbol_US
App.activeDocument().SymbolUS.Direction = (0.0,0.0,1.0)
App.activeDocument().SymbolUS.X = depx
App.activeDocument().SymbolUS.Y = depy
App.activeDocument().SymbolUS.Scale = scale #0.8 # A3
#ori App.activeDocument().Page.addObject(App.activeDocument().SymbolUS)
PageActive = unicode(PageActive)
App.activeDocument().getObjectsByLabel(PageActive)[0].addObject(App.activeDocument().SymbolUS)
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False
App.ActiveDocument.recompute()
try:
DESIGNED_BY = App.activeDocument().getObject(PageActive).EditableTexts[0] # lineEdit01 DESIGNED_BY
CREATION_DATE = App.activeDocument().getObject(PageActive).EditableTexts[1] # lineEdit02 CREATION_DATE date
try:
CREA_DATE = CREATION_DATE.split(" - ")[0] # lineEdit02h date
except:
CREA_DATE = CREATION_DATE
try:
CREA_TIME = CREATION_DATE.split(" - ")[1] # lineEdit02h heure
except: None
CHECKED_BY = App.activeDocument().getObject(PageActive).EditableTexts[2] # lineEdit03
CHECK_DATE = App.activeDocument().getObject(PageActive).EditableTexts[3] # lineEdit04 date
try:
CHEC_DATE = CHECK_DATE.split(" - ")[0] # lineEdit04 date
except:
CHEC_DATE = CHECK_DATE
try:
CHEC_TIME = CHECK_DATE.split(" - ")[1] # lineEdit04h heure
except: None
SIZE = App.activeDocument().getObject(PageActive).EditableTexts[4] # lineEdit05
SCALE = App.activeDocument().getObject(PageActive).EditableTexts[5] # lineEdit06
WEIGHT = App.activeDocument().getObject(PageActive).EditableTexts[6] # lineEdit07
DRAWING_NUMBER = App.activeDocument().getObject(PageActive).EditableTexts[7] # lineEdit08
SHEET = App.activeDocument().getObject(PageActive).EditableTexts[8] # lineEdit09
TITLE = App.activeDocument().getObject(PageActive).EditableTexts[9] # textEdit_01
try:
DESCRIPTION = App.activeDocument().getObject(PageActive).EditableTexts[10] # textEdit_02
COMPANY = App.activeDocument().getObject(PageActive).EditableTexts[11] # textEdit_02b
COPYRIGHT = App.activeDocument().getObject(PageActive).EditableTexts[12] # lineEdit_20
Note_A = App.activeDocument().getObject(PageActive).EditableTexts[13] # lineEdit_10
Note_B = App.activeDocument().getObject(PageActive).EditableTexts[14] # lineEdit_11
Note_C = App.activeDocument().getObject(PageActive).EditableTexts[15] # lineEdit_12
Note_D = App.activeDocument().getObject(PageActive).EditableTexts[16] # lineEdit_13
Note_E = App.activeDocument().getObject(PageActive).EditableTexts[17] # lineEdit_14
Note_F = App.activeDocument().getObject(PageActive).EditableTexts[18] # lineEdit_15
Note_G = App.activeDocument().getObject(PageActive).EditableTexts[19] # lineEdit_16
Note_H = App.activeDocument().getObject(PageActive).EditableTexts[20] # lineEdit_17
Note_I = App.activeDocument().getObject(PageActive).EditableTexts[21] # lineEdit_18
except Exception:
App.Console.PrintError("Erreur cartouche level DESCRIPTION (Missing field)"+"\n"
"You may be using an inadequate template. Try with this template"+"\n")
App.Console.PrintMessage("http://www.freecadweb.org/wiki/index.php?title=Misc_templates_Full"+"\n\n")
App.Console.PrintError("Or for the original FreeCAD template use this macro"+"\n")
App.Console.PrintMessage("http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC"+"\n")
errorDialog("Erreur cartouche level DESCRIPTION (Missing field)"+"\n"
"You may be using an inadequate template. Try with this template"+"\n"
"http://www.freecadweb.org/wiki/index.php?title=Misc_templates_Full"+"\n\n"
"Or for the original FreeCAD template use this macro"+"\n"
"http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC"+"\n\n")
except:
errorDialog("Erreur cartouche")
class Ui_MainWindow(object):
def __init__(self, MainWindow):
global path
self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(810, 400)
MainWindow.setMaximumSize(QtCore.QSize(810, 400))
self.centralWidget = QtGui.QWidget(MainWindow)
self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
# self.pushButton01 = QtGui.QPushButton(self.centralWidget)
# self.pushButton01.setGeometry(QtCore.QRect(115, 360, 93, 28))
# self.pushButton01.setObjectName(_fromUtf8("pushButton01"))
# self.pushButton01.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01
self.pushButton02 = QtGui.QPushButton(self.centralWidget)
self.pushButton02.setGeometry(QtCore.QRect(225, 360, 93, 28))
self.pushButton02.setObjectName(_fromUtf8("pushButton02"))
self.pushButton02.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02
self.pushButton03 = QtGui.QPushButton(self.centralWidget)
self.pushButton03.setGeometry(QtCore.QRect(335, 360, 93, 28))
self.pushButton03.setToolTip("The memo button work only with the first Page")
self.pushButton03.setObjectName(_fromUtf8("pushButton03"))
self.pushButton03.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03
self.pushButton04 = QtGui.QPushButton(self.centralWidget)
self.pushButton04.setGeometry(QtCore.QRect(445, 360, 93, 28))
self.pushButton04.setObjectName(_fromUtf8("pushButton04"))
self.pushButton04.clicked.connect(self.on_pushButton04_clicked) #connection pushButton04
self.pushButton05 = QtGui.QPushButton(self.centralWidget)
self.pushButton05.setGeometry(QtCore.QRect(555, 360, 93, 28))
self.pushButton05.setObjectName(_fromUtf8("pushButton05"))
self.pushButton05.clicked.connect(self.on_pushButton05_clicked) #connection pushButton05
#####
self.groupBox = QtGui.QGroupBox(self.centralWidget)
self.groupBox.setGeometry(QtCore.QRect(20, 159, 190, 101))
self.groupBox.setObjectName(_fromUtf8("groupBox"))
self.label_20 = QtGui.QLabel(self.groupBox)
self.label_20.setGeometry(QtCore.QRect(115, 5, 61, 17))
self.label_20.setObjectName(_fromUtf8("label_20"))
############### font and color Label
font = QtGui.QFont()
font.setBold(True)
self.label_20.setFont(font)
self.label_20.setStyleSheet("color : #ff0000")
############### font and color
self.label_20.setVisible(False)
self.radioButton_0 = QtGui.QRadioButton(self.groupBox)
self.radioButton_0.setGeometry(QtCore.QRect(95, 1, 91, 17))
self.radioButton_0.setChecked(True)
self.radioButton_0.setEnabled(False)
self.radioButton_0.setVisible(False)
self.radioButton_0.setObjectName(_fromUtf8("radioButton_0"))
self.radioButton_1 = QtGui.QRadioButton(self.groupBox)
self.radioButton_1.setGeometry(QtCore.QRect(95, 20, 91, 17))
self.radioButton_1.setObjectName(_fromUtf8("radioButton_1"))
self.radioButton_1.clicked.connect(self.on_radioButton_A3_clicked)# connect radioButton_A3
self.radioButton_2 = QtGui.QRadioButton(self.groupBox)
self.radioButton_2.setGeometry(QtCore.QRect(95, 39, 91, 17))
self.radioButton_2.setObjectName(_fromUtf8("radioButton_2"))
self.radioButton_2.clicked.connect(self.on_radioButton_A3_clicked)# connect radioButton_A3
self.radioButton_3 = QtGui.QRadioButton(self.groupBox)
self.radioButton_3.setGeometry(QtCore.QRect(95, 58, 91, 17))
self.radioButton_3.setObjectName(_fromUtf8("radioButton_3"))
self.radioButton_3.clicked.connect(self.on_radioButton_A4_clicked)# connect radioButton_A4
self.radioButton_4 = QtGui.QRadioButton(self.groupBox)
self.radioButton_4.setGeometry(QtCore.QRect(95, 76, 91, 17))
self.radioButton_4.setObjectName(_fromUtf8("radioButton_4"))
self.radioButton_4.clicked.connect(self.on_radioButton_A4_clicked)# connect radioButton_A4
self.lineEdit_05 = QtGui.QLineEdit(self.groupBox)
self.lineEdit_05.setGeometry(QtCore.QRect(10, 20, 75, 41))
font = QtGui.QFont()
font.setPointSize(25)
font.setBold(False)
font.setWeight(50)
self.lineEdit_05.setFont(font)
self.lineEdit_05.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_05.setObjectName(_fromUtf8("lineEdit_05"))
self.lineEdit_05.setText(SIZE)
self.pushButton10 = QtGui.QPushButton(self.groupBox)
self.pushButton10.setGeometry(QtCore.QRect(10, 70, 75, 23))
self.pushButton10.setObjectName(_fromUtf8("pushButton10"))
self.pushButton10.clicked.connect(self.on_pushButton10_clicked) #connection pushButton10
#####
self.pushButton06 = QtGui.QPushButton(self.centralWidget)
self.pushButton06.setGeometry(QtCore.QRect(170, 57, 20, 20))
self.pushButton06.setObjectName(_fromUtf8("pushButton06"))
self.pushButton06.clicked.connect(self.on_pushButton06_clicked) #connection pushButton06
self.pushButton07 = QtGui.QPushButton(self.centralWidget)
self.pushButton07.setGeometry(QtCore.QRect(190, 57, 20, 20))
self.pushButton07.setObjectName(_fromUtf8("pushButton07"))
self.pushButton07.clicked.connect(self.on_pushButton07_clicked) #connection pushButton07
self.pushButton08 = QtGui.QPushButton(self.centralWidget)
self.pushButton08.setGeometry(QtCore.QRect(170, 137, 20, 20))
self.pushButton08.setObjectName(_fromUtf8("pushButton08"))
self.pushButton08.clicked.connect(self.on_pushButton08_clicked) #connection pushButton08
self.pushButton09 = QtGui.QPushButton(self.centralWidget)
self.pushButton09.setGeometry(QtCore.QRect(190, 137, 20, 20))
self.pushButton09.setObjectName(_fromUtf8("pushButton09"))
self.pushButton09.clicked.connect(self.on_pushButton09_clicked) #connection pushButton09
self.lineEdit_01 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_01.setGeometry(QtCore.QRect(20, 20, 190, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_01.setFont(font)
self.lineEdit_01.setObjectName(_fromUtf8("lineEdit_01"))
self.lineEdit_01.setText(DESIGNED_BY)
self.lineEdit_02 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_02.setGeometry(QtCore.QRect(20, 60, 82, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_02.setFont(font)
self.lineEdit_02.setObjectName(_fromUtf8("lineEdit_02"))
self.lineEdit_02.setText(CREA_DATE)
self.lineEdit_02h = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_02h.setGeometry(QtCore.QRect(98, 60, 72, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_02h.setFont(font)
self.lineEdit_02h.setObjectName(_fromUtf8("lineEdit_02h"))
self.lineEdit_02h.setText(CREA_TIME)
self.lineEdit_03 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_03.setGeometry(QtCore.QRect(20, 100, 190, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_03.setFont(font)
self.lineEdit_03.setObjectName(_fromUtf8("lineEdit_03"))
self.lineEdit_03.setText(CHECKED_BY)
self.lineEdit_04 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_04.setGeometry(QtCore.QRect(20, 140, 82, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_04.setFont(font)
self.lineEdit_04.setObjectName(_fromUtf8("lineEdit_04"))
self.lineEdit_04.setText(CHEC_DATE)
self.lineEdit_04h = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_04h.setGeometry(QtCore.QRect(98, 140, 72, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_04h.setFont(font)
self.lineEdit_04h.setObjectName(_fromUtf8("lineEdit_04h"))
self.lineEdit_04h.setText(CHEC_TIME)
self.lineEdit_06 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_06.setGeometry(QtCore.QRect(20, 280, 61, 41))
font = QtGui.QFont()
font.setPointSize(10)
self.lineEdit_06.setFont(font)
self.lineEdit_06.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_06.setObjectName(_fromUtf8("lineEdit_06"))
self.lineEdit_06.setText(SCALE)
self.lineEdit_07 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_07.setGeometry(QtCore.QRect(100, 280, 101, 41))
font = QtGui.QFont()
font.setPointSize(10)
self.lineEdit_07.setFont(font)
self.lineEdit_07.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_07.setObjectName(_fromUtf8("lineEdit_07"))
self.lineEdit_07.setText(WEIGHT)
self.lineEdit_08 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_08.setGeometry(QtCore.QRect(220, 280, 341, 41))
self.lineEdit_08.setObjectName(_fromUtf8("lineEdit_08"))
self.lineEdit_08.setText(DRAWING_NUMBER)
self.lineEdit_09 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_09.setGeometry(QtCore.QRect(570, 280, 81, 41))
self.lineEdit_09.setObjectName(_fromUtf8("lineEdit_09"))
self.lineEdit_09.setText(SHEET)
self.lineEdit_20 = QtGui.QLineEdit(self.centralWidget) # Copyright
self.lineEdit_20.setGeometry(QtCore.QRect(20, 330, 771, 22))
self.lineEdit_20.setObjectName(_fromUtf8("lineEdit_20"))
self.lineEdit_20.setText(COPYRIGHT)
self.lineEdit_10 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_10.setGeometry(QtCore.QRect(690, 290, 101, 30))
self.lineEdit_10.setObjectName(_fromUtf8("lineEdit_10"))
self.lineEdit_10.setText(Note_A)
self.lineEdit_11 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_11.setGeometry(QtCore.QRect(690, 260, 101, 30))
self.lineEdit_11.setObjectName(_fromUtf8("lineEdit_11"))
self.lineEdit_11.setText(Note_B)
self.lineEdit_12 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_12.setGeometry(QtCore.QRect(690, 230, 101, 30))
self.lineEdit_12.setObjectName(_fromUtf8("lineEdit_12"))
self.lineEdit_12.setText(Note_C)
self.lineEdit_13 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_13.setGeometry(QtCore.QRect(690, 200, 101, 30))
self.lineEdit_13.setObjectName(_fromUtf8("lineEdit_13"))
self.lineEdit_13.setText(Note_D)
self.lineEdit_14 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_14.setGeometry(QtCore.QRect(690, 170, 101, 30))
self.lineEdit_14.setObjectName(_fromUtf8("lineEdit_14"))
self.lineEdit_14.setText(Note_E)
self.lineEdit_15 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_15.setGeometry(QtCore.QRect(690, 140, 101, 30))
self.lineEdit_15.setObjectName(_fromUtf8("lineEdit_15"))
self.lineEdit_15.setText(Note_F)
self.lineEdit_16 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_16.setGeometry(QtCore.QRect(690, 110, 101, 30))
self.lineEdit_16.setObjectName(_fromUtf8("lineEdit_16"))
self.lineEdit_16.setText(Note_G)
self.lineEdit_17 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_17.setGeometry(QtCore.QRect(690, 80, 101, 30))
self.lineEdit_17.setObjectName(_fromUtf8("lineEdit_17"))
self.lineEdit_17.setText(Note_H)
self.lineEdit_18 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_18.setGeometry(QtCore.QRect(690, 50, 101, 30))
self.lineEdit_18.setObjectName(_fromUtf8("lineEdit_18"))
self.lineEdit_18.setText(Note_I)
##
self.lineEdit_page = QtGui.QLineEdit(self.centralWidget) # nom de page
self.lineEdit_page.setGeometry(QtCore.QRect(20, 365, 181, 20))
self.lineEdit_page.setToolTip("Name page to work"+"\n"
"The name of the first page is always named 'Page'")
self.lineEdit_page.setObjectName(_fromUtf8("lineEdit_page"))
self.lineEdit_page.setText(PageActive)
self.lineEdit_page.textChanged.connect(self.on_lineEdit_page_Pressed) #
self.label_01T = QtGui.QLabel(self.centralWidget)
self.label_01T.setGeometry(QtCore.QRect(220, 0, 91, 16))
self.label_01T.setObjectName(_fromUtf8("label_01T"))
self.textEdit_01 = QtGui.QTextEdit(self.centralWidget) # Title
self.textEdit_01.setGeometry(QtCore.QRect(220, 20, 431,55 ))
font = QtGui.QFont()
font.setPointSize(15)
font.setBold(True)
font.setWeight(75)
self.textEdit_01.setFont(font)
self.textEdit_01.setObjectName(_fromUtf8("textEdit_01"))
self.textEdit_01.setText(TITLE)
self.label_02T = QtGui.QLabel(self.centralWidget)
self.label_02T.setGeometry(QtCore.QRect(220, 80, 101, 16))
self.label_02T.setObjectName(_fromUtf8("label_02T"))
self.textEdit_02 = QtGui.QTextEdit(self.centralWidget) # DESCRIPTION
self.textEdit_02.setGeometry(QtCore.QRect(220, 100, 431, 55))
self.textEdit_02.setObjectName(_fromUtf8("textEdit_02"))
self.textEdit_02.setText(DESCRIPTION)
self.label_02bT = QtGui.QLabel(self.centralWidget)
self.label_02bT.setGeometry(QtCore.QRect(220, 160, 90, 16))
self.label_02bT.setObjectName(_fromUtf8("label_02bT"))
self.textEdit_02b = QtGui.QTextEdit(self.centralWidget) # COMPANY
self.textEdit_02b.setGeometry(QtCore.QRect(220, 180, 340, 60))
self.textEdit_02b.setObjectName(_fromUtf8("textEdit_02b"))
self.textEdit_02b.setText(COMPANY)
self.label_01 = QtGui.QLabel(self.centralWidget)
self.label_01.setGeometry(QtCore.QRect(20, 0, 91, 16))
self.label_01.setObjectName(_fromUtf8("label_01"))
self.label_02 = QtGui.QLabel(self.centralWidget)
self.label_02.setGeometry(QtCore.QRect(20, 40, 53, 16))
self.label_02.setObjectName(_fromUtf8("label_02"))
self.label_03 = QtGui.QLabel(self.centralWidget)
self.label_03.setGeometry(QtCore.QRect(20, 80, 101, 16))
self.label_03.setObjectName(_fromUtf8("label_03"))
self.label_04 = QtGui.QLabel(self.centralWidget)
self.label_04.setGeometry(QtCore.QRect(20, 120, 91, 16))
self.label_04.setObjectName(_fromUtf8("label_04"))
self.label_06 = QtGui.QLabel(self.centralWidget)
self.label_06.setGeometry(QtCore.QRect(20, 260, 53, 16))
self.label_06.setObjectName(_fromUtf8("label_06"))
self.label_07 = QtGui.QLabel(self.centralWidget)
self.label_07.setGeometry(QtCore.QRect(100, 260, 101, 16))
self.label_07.setObjectName(_fromUtf8("label_07"))
self.label_08 = QtGui.QLabel(self.centralWidget)
self.label_08.setGeometry(QtCore.QRect(220, 260, 121, 16))
self.label_08.setObjectName(_fromUtf8("label_08"))
self.label_09 = QtGui.QLabel(self.centralWidget)
self.label_09.setGeometry(QtCore.QRect(570, 260, 53, 16))
self.label_09.setObjectName(_fromUtf8("label_09"))
self.label_10 = QtGui.QLabel(self.centralWidget)
self.label_10.setGeometry(QtCore.QRect(670, 290, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_10.setFont(font)
self.label_10.setObjectName(_fromUtf8("label_10"))
self.label_11 = QtGui.QLabel(self.centralWidget)
self.label_11.setGeometry(QtCore.QRect(670, 260, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_11.setFont(font)
self.label_11.setObjectName(_fromUtf8("label_11"))
self.label_12 = QtGui.QLabel(self.centralWidget)
self.label_12.setGeometry(QtCore.QRect(670, 230, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_12.setFont(font)
self.label_12.setObjectName(_fromUtf8("label_12"))
self.label_13 = QtGui.QLabel(self.centralWidget)
self.label_13.setGeometry(QtCore.QRect(670, 200, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_13.setFont(font)
self.label_13.setObjectName(_fromUtf8("label_13"))
self.label_14 = QtGui.QLabel(self.centralWidget)
self.label_14.setGeometry(QtCore.QRect(670, 170, 15, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_14.setFont(font)
self.label_14.setObjectName(_fromUtf8("label_14"))
self.label_15 = QtGui.QLabel(self.centralWidget)
self.label_15.setGeometry(QtCore.QRect(670, 140, 14, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_15.setFont(font)
self.label_15.setObjectName(_fromUtf8("label_15"))
self.label_16 = QtGui.QLabel(self.centralWidget)
self.label_16.setGeometry(QtCore.QRect(670, 110, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_16.setFont(font)
self.label_16.setObjectName(_fromUtf8("label_16"))
self.label_17 = QtGui.QLabel(self.centralWidget)
self.label_17.setGeometry(QtCore.QRect(670, 80, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_17.setFont(font)
self.label_17.setObjectName(_fromUtf8("label_17"))
self.label_18 = QtGui.QLabel(self.centralWidget)
self.label_18.setGeometry(QtCore.QRect(670, 50, 10, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_18.setFont(font)
self.label_18.setObjectName(_fromUtf8("label_18"))
self.label_19 = QtGui.QLabel(self.centralWidget)
self.label_19.setGeometry(QtCore.QRect(720, 15, 100, 33))
self.label_19.setObjectName(_fromUtf8("label_19"))
self.label_page = QtGui.QLabel(self.centralWidget)
self.label_page.setGeometry(QtCore.QRect(20, 350, 181, 16))
self.label_page.setObjectName(_fromUtf8("label_page"))
MainWindow.setCentralWidget(self.centralWidget)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenêtre en avant
MainWindow.setWindowTitle("Cartouche (Full)")
# self.pushButton01.setText("Position")
self.pushButton02.setText("Quitter")
self.pushButton03.setText("Memo")
self.pushButton04.setText("Nettoyer")
self.pushButton05.setText("Appliquer")
self.pushButton06.setText("D.")
self.pushButton07.setText("H.")
self.pushButton08.setText("D.")
self.pushButton09.setText("H.")
self.pushButton10.setText("For US Symb.")
self.label_01.setText("Designed by :")
self.label_02.setText("Date :")
self.label_03.setText("Checked by :")
self.label_04.setText("Date :")
self.label_06.setText("Scale :")
self.label_07.setText("Weight (Kg) :")
self.label_08.setText("Drawing number :")
self.label_01T.setText("Title :")
self.label_02T.setText("Description :")
self.label_02bT.setText("Company :")
self.label_09.setText("Sheet :")
self.label_10.setText("A")
self.label_11.setText("B")
self.label_12.setText("C")
self.label_13.setText("D")
self.label_14.setText("E")
self.label_15.setText("F")
self.label_16.setText("G")
self.label_17.setText("H")
self.label_18.setText("I")
self.label_19.setText("Notes")
self.label_20.setText("Warning")
self.label_page.setText("Name page to work")
self.groupBox.setTitle("Size :")
self.radioButton_1.setText("A3 Landscape")
self.radioButton_2.setText("A3 Portrait")
self.radioButton_3.setText("A4 Landscape")
self.radioButton_4.setText("A4 Portrait")
self.lineEdit_05.setText("?")
#______________________________________________________________________________________
# Radio Boutons
def on_radioButton_A3_clicked(self): # connect radioButton_A3
self.label_20.setVisible(False)
self.lineEdit_05.setText("A3")
def on_radioButton_A4_clicked(self): # connect radioButton_A4
self.label_20.setVisible(False)
self.lineEdit_05.setText("A4")
# Boutons
def on_pushButton10_clicked(self): # Bouton /Symbole
global SymbolSwitch
global path
self.label_20.setVisible(False)
if SymbolSwitch == 1:
self.pushButton10.setText("For US Symb.")
if self.radioButton_1.isChecked():
symbol_EU(247.5, 263.5, 0.8) # A3 Landscape
if self.radioButton_2.isChecked():
symbol_EU(124.55, 386.3, 0.8) # A3 Portrait
if self.radioButton_3.isChecked():
symbol_EU(158.7, 181.35, 0.6) # A4 Landscape
if self.radioButton_4.isChecked():
symbol_EU(71.9, 269.0, 0.6) # A4 Portrait
SymbolSwitch = 0
else:
self.pushButton10.setText("For EU Symb.")
if self.radioButton_1.isChecked():
symbol_US(247.5, 263.5, 0.8) # A3 Landscape
if self.radioButton_2.isChecked():
symbol_US(124.55, 386.3, 0.8) # A3 Portrait
if self.radioButton_3.isChecked():
symbol_US(158.7, 181.35, 0.6) # A4 Landscape
if self.radioButton_4.isChecked():
symbol_US(71.9, 269.0, 0.6) # A4 Portrait
SymbolSwitch = 1
if self.radioButton_0.isChecked():
self.label_20.setVisible(True)
FreeCAD.Console.PrintError("Select one format A3 or A4 for the Symbole" + "\n")
def on_lineEdit_page_Pressed(self): # Name page
global PageActive
PageActive = self.lineEdit_page.text()
def on_pushButton09_clicked(self): # Bouton /heure document
self.lineEdit_04h.setText(str(heure()))
def on_pushButton08_clicked(self): # Bouton date/ document
if self.pushButton10=="Symbole US":
self.lineEdit_04.setText(str(dateUs()))
else:
self.lineEdit_04.setText(str(dateEu()))
def on_pushButton07_clicked(self): # Bouton /heure checked
self.lineEdit_02h.setText(str(heure()))
def on_pushButton06_clicked(self): # Bouton date/ checked
if self.pushButton10=="Symbole US":
self.lineEdit_02.setText(str(dateUs()))
else:
self.lineEdit_02.setText(str(dateEu()))
def on_pushButton05_clicked(self): # Bouton Appliquer
try:
global ui
global SymbolSwitch
global PageActive
if SymbolSwitch == 1:
SymbolSwitch = 0
else:
SymbolSwitch = 1
ff = ui
ff.on_pushButton10_clicked()
DESIGNED_BY = utf8(self.lineEdit_01.text())
CREATION_DATE = utf8(self.lineEdit_02.text())+" - "+utf8(self.lineEdit_02h.text())
CHECKED_BY = utf8(self.lineEdit_03.text())
CHECK_DATE = utf8(self.lineEdit_04.text())+" - "+utf8(self.lineEdit_04h.text())
SIZE = utf8(self.lineEdit_05.text())
SCALE = utf8(self.lineEdit_06.text())
WEIGHT = utf8(self.lineEdit_07.text())
DRAWING_NUMBER = utf8(self.lineEdit_08.text())
SHEET = utf8(self.lineEdit_09.text())
TITLE = utf8(self.textEdit_01.toPlainText())
DESCRIPTION = utf8(self.textEdit_02.toPlainText())
COMPANY = utf8(self.textEdit_02b.toPlainText())
COPYRIGHT = utf8(self.lineEdit_20.text())
Note_A = utf8(self.lineEdit_10.text())
Note_B = utf8(self.lineEdit_11.text())
Note_C = utf8(self.lineEdit_12.text())
Note_D = utf8(self.lineEdit_13.text())
Note_E = utf8(self.lineEdit_14.text())
Note_F = utf8(self.lineEdit_15.text())
Note_G = utf8(self.lineEdit_16.text())
Note_H = utf8(self.lineEdit_17.text())
Note_I = utf8(self.lineEdit_18.text())
PageActive = unicode(PageActive)
try:
FreeCAD.getDocument(App.ActiveDocument.Name).getObjectsByLabel(PageActive)[0].EditableTexts = [unicode(DESIGNED_BY, 'utf-8'),unicode(CREATION_DATE, 'utf-8'),unicode(CHECKED_BY, 'utf-8'), unicode(CHECK_DATE, 'utf-8'), unicode(SIZE, 'utf-8'), unicode(SCALE, 'utf-8'), unicode(WEIGHT, 'utf-8'), unicode(DRAWING_NUMBER, 'utf-8'), unicode(SHEET, 'utf-8'), unicode(TITLE, 'utf-8'), unicode(DESCRIPTION, 'utf-8'), unicode(COMPANY, 'utf-8'), unicode(COPYRIGHT, 'utf-8'), unicode(Note_A, 'utf-8'), unicode(Note_B, 'utf-8'), unicode(Note_C, 'utf-8'), unicode(Note_D, 'utf-8'), unicode(Note_E, 'utf-8'), unicode(Note_F, 'utf-8'), unicode(Note_G, 'utf-8'), unicode(Note_H, 'utf-8'), unicode(Note_I, 'utf-8'),]
except:
try:
FreeCAD.getDocument (App.ActiveDocument.Name).getObjectsByLabel(PageActive)[0].EditableTexts = [DESIGNED_BY.encode('utf-8'), CREATION_DATE.encode('utf-8'), CHECKED_BY.encode('utf-8'), CHECK_DATE.encode('utf-8'), SIZE.encode('utf-8'), SCALE.encode('utf-8'), WEIGHT.encode('utf-8'), DRAWING_NUMBER.encode('utf-8'), SHEET.encode('utf-8'), TITLE.encode('utf-8'), DESCRIPTION.encode('utf-8'), COMPANY.encode('utf-8'), COPYRIGHT.encode('utf-8'), Note_A.encode('utf-8'), Note_B.encode('utf-8'), Note_C.encode('utf-8'), Note_D.encode('utf-8'), Note_E.encode('utf-8'), Note_F.encode('utf-8'), Note_G.encode('utf-8'), Note_H.encode('utf-8'), Note_I.encode('utf-8'), ]
except Exception:
FreeCAD.Console.PrintError("Error write cartouche" + "\n")
except Exception:
None
FreeCAD.Console.PrintError("Error or not page " + "\n")
App.ActiveDocument.recompute()
def on_pushButton04_clicked(self): # Bouton nettoyer
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
except:
None
DESIGNED_BY = "" ;self.lineEdit_01.setText("")
CREATION_DATE = "" ;self.lineEdit_02.setText("")
self.lineEdit_02h.setText("")
CHECKED_BY = "" ;self.lineEdit_03.setText("")
CHECK_DATE = "" ;self.lineEdit_04.setText("")
self.lineEdit_04h.setText("")
SIZE = "" ;self.lineEdit_05.setText("")
SCALE = "" ;self.lineEdit_06.setText("")
WEIGHT = "" ;self.lineEdit_07.setText("")
DRAWING_NUMBER = "" ;self.lineEdit_08.setText("")
SHEET = "" ;self.lineEdit_09.setText("")
TITLE = "" ;self.textEdit_01.setText("")
DESCRIPTION = "" ;self.textEdit_02.setText("")
COMPANY = "" ;self.textEdit_02b.setText("")
COPYRIGHT = "" ;self.lineEdit_20.setText("")
Note_A = "" ;self.lineEdit_10.setText("")
Note_B = "" ;self.lineEdit_11.setText("")
Note_C = "" ;self.lineEdit_12.setText("")
Note_D = "" ;self.lineEdit_13.setText("")
Note_E = "" ;self.lineEdit_14.setText("")
Note_F = "" ;self.lineEdit_15.setText("")
Note_G = "" ;self.lineEdit_16.setText("")
Note_H = "" ;self.lineEdit_17.setText("")
Note_I = "" ;self.lineEdit_18.setText("")
PageActive = "Page" ;self.lineEdit_page.setText("Page")
self.lineEdit_05.setText("?")
self.label_20.setVisible(False)
self.radioButton_0.setChecked(True)
def on_pushButton03_clicked(self): # Bouton Memo
self.lineEdit_01.setText(DESIGNED_BY)
self.lineEdit_02.setText(CREA_DATE)
self.lineEdit_02h.setText(CREA_TIME)
self.lineEdit_03.setText(CHECKED_BY)
self.lineEdit_04.setText(CHEC_DATE)
self.lineEdit_04h.setText(CHEC_TIME)
self.lineEdit_05.setText("?") #(SIZE)
self.lineEdit_06.setText(SCALE)
self.lineEdit_07.setText(WEIGHT)
self.lineEdit_08.setText(DRAWING_NUMBER)
self.lineEdit_09.setText(SHEET)
self.textEdit_01.setText(TITLE)
self.textEdit_02.setText(DESCRIPTION)
self.textEdit_02b.setText(COMPANY)
self.lineEdit_20.setText(COPYRIGHT)
self.lineEdit_10.setText(Note_A)
self.lineEdit_11.setText(Note_B)
self.lineEdit_12.setText(Note_C)
self.lineEdit_13.setText(Note_D)
self.lineEdit_14.setText(Note_E)
self.lineEdit_15.setText(Note_F)
self.lineEdit_16.setText(Note_G)
self.lineEdit_17.setText(Note_H)
self.lineEdit_18.setText(Note_I)
self.lineEdit_page.setText(PageActive)
self.radioButton_0.setChecked(True)
def on_pushButton02_clicked(self): # Bouton Quitter
App.Console.PrintMessage("Terminé\r\n")
self.window.hide()
# def on_pushButton01_clicked(self): # Bouton appel de Position
# MainWindow.resize(210, 480)
# executer()
# MainWindow.resize(810, 480)
#______________________________________________________________________________________
MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()
Other
The fields have no length limit, check your cartouche.
This program creates a drawing representing the regional projection symbol on your project, do not touch it is registered therefore hidden form invisible.
If you want it to be cleared uncomment the commented lines and vice versa
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False
et
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False
(I had some times an error in execution when the symbol was erased)
This module works with the drawing sheet included in FreeCAD this sheet is called Page, do not change the name of this sheet!
Revision
ver "00.07 : 05/02/2017 : add save cartouche with name page (for multi page in projects) ps: not for character accentuate "àùé ..."
ver 00.06 : 13/10/2016 : selection format page and position for the symbol convention (for FreeCAD ver 0.17)
ver 5 : 08/08/2014 PyQt4 and PySide