FreeCAD Oczekiwania
Przeznaczenie
Ta strona wiki jest przeznaczona dla nowych użytkowników programu FreeCAD odchodzących z innych rozwiązań CAD / CAM.
Słowo wstępne
Wielu hobbystów, niezależnych projektantów i małych firm często szuka schronienia przed wysokimi kosztami i ograniczeniami licencyjnymi komercyjnego oprogramowania, a może po prostu wybierasz FreeCAD, ponieważ wierzysz w filozofię stojącą za FOSS. W każdym z tych przypadków, WITAMY! Jest wielu użytkowników, tak jak Ty, którzy z powodzeniem przeszli na FreeCAD dla swoich osobistych i zawodowych potrzeb. Ta strona wiki jest zaprojektowana aby pomóc Ci w osiągnięciu sukcesu i ustalić realistyczne oczekiwania podczas nurkowania w FreeCAD Way, który najprawdopodobniej różni się od tego do czego przywykłeś w innych popularnych programach CAD.
Czego mogę się spodziewać?
W swoim rdzeniu FreeCAD jest modelerem parametrycznym. Wykorzystuje koncepcję środowisk pracy, gdzie każde środowisko jest odpowiedzialne za konkretne zadania i funkcje. Jako taki może być używany do wielu celów. Jest aktywnie wykorzystywany w produkcji i dość stabilny. Jednak, jak każdy inny program CAD, FreeCAD nie jest w 100% stabilny.
W swoim rdzeniu FreeCAD jest potężnym modelerem parametrycznym. Wykorzystuje on modułową koncepcję środowisk pracy, gdzie każde z nich odpowiada za określone zadania i funkcje. Koncepcja ta jest bardzo elastyczna i może być z powodzeniem wykorzystywana do wielu celów. FreeCAD jest aktywnie rozwijany, używany w produkcji i dość stabilny, ale jak każdy inny program CAD, nie jest stabilny w 100%.
Pochodząc z innego programu CAD możesz uznać terminologię, strukturę i organizację FreeCADa za nieco obcą. Prawdopodobnie będziesz musiał dokonać pewnych dostosowań w swoich przepływach pracy, nauczyć się funkcjonalnych obejść lub wykorzystać nasz potężny ekosystem makrodefinicji, ale w większości przypadków będziesz w stanie osiągnąć to, co chcesz. A jeśli potrzebujesz pomocy: mamy bardzo aktywne i responsywne forum chętne do pomocy. Wśród członków forum na pewno są (byli) użytkownicy twojego obecnego programu CAD. Nie wahaj się więc skorzystać z tych zasobów.
Jak mogę pomóc?
Jest wiele sposobów: możesz dokonać wpłaty, pomóc w pytaniach na forum, albo napisać dokumentację lub kod. Zobacz Pomoc FreeCAD.
Zasoby dydaktyczne
Oficjalne
Nieoficjalne
Następujące kanały YouTube mają dość dobrej jakości treści skupione wokół programu FreeCAD (zaleca się ignorowanie wszelkich tutoriali opartych na wersji 0.17 lub wcześniejszej):
- MangoJelly Solutions (kilka list odtwarzana dla początkujących, średnio-zaawansowanych i zaawansowanych użytkowników)
- Joko EngineeringHelp (filmy dla średnio-zaawansowanych)
- Brodie Fairhall (kilka filmów pomagających użytkownikom Fusion 360 w przejściu na FreeCAD)
- I więcej...
Questions and answers
"Can FreeCAD do XYZ?"
FreeCAD already has the ability to do the following types of work:
- Spline-based parametric modeling using the Part, Part Design and Sketcher workbenches
- Surface/Curves modeling using NURBS
- Mesh import/modifications
- Assembly simulation (3 different approaches, A2+, ASM3, and ASM4, are all actively developed)
- Architectural/BIM design
- Mechanical Stress Analysis (FEM/FEA)
- Computational Fluid Dynamic Analysis (CFD)
- Technical Drawings/Drafting
- And more core and external workbenches...
"User interface (UI/UX) is ugly, odd, confusing or not like XYZ Software!"
FreeCAD allows for extensive customization of the user interface. While we realize the default colors or arrangement of elements may not be pleasing to everyone, we encourage you to tailor it to your own specific needs and work-flows. If you feel you've come up with what could be a popular arrangement/theme/customized toolbars etc. please feel free to look into leveraging the recently added Preference Pack feature and share it with the community. Perhaps your efforts will help someone else in their transition to FreeCAD. FOSS software thrives on all sorts of community contributions and this is a common topic of discussion.
"Why doesn't this feature work like in XYZ software?"
FreeCAD has a development pedigree spanning over 20 years. Functions and behaviors are heavily reviewed, debated and assessed before they are added or changed. Have an open mind, while it may not be apparent, there is likely a very good rationale behind such things. This isn't to say that FreeCAD is perfect, but please consider that what you've grown used to may not be the only or best way to get something done.
"I can't figure out the workflow of FreeCAD!"
FreeCAD has a philosophy to not dictate 'how' you use it. Rather it provides tools and a wide array of options under which you 'can' use them. This means two things. First, the software isn't going to necessarily 'guide' or 'steer' you toward a certain style or workflow. Second, this means you can experiment with the tools and find what works best for you. This doesn't mean there aren't general 'best practices' to keep in mind while using FreeCAD, but those best practices generally apply to any professional design software when creating stable models.
"What the heck is with all these workbenches?"
One of the powerful features of FreeCAD is it's modularity. This is done by compartmentalizing tool development into workbenches. Once you are familiar with the tools provided they can often work synergistically to create highly complex and advanced models. A great analogy is that FreeCAD is structured similar to a mechanics rolling tool-chest, and each workbench is a drawer of specific tools. You can use these tools to build a car, but it is up to the mechanic to understand how to use them to accomplish their goal.
"FreeCAD is fundamentally broken, my models blow-up!"
FreeCAD is built around an open-source Geometric Modeling Kernel called "OpenCascade Technology" (or OCC). It is the most feature rich and mature open source modeling kernel available. However it does have bugs, quirks and limitations. One of these is referred to as the "Topological Naming Problem" (or TNP). Whenever a model is modified, the internal names of faces and edges are changed by the kernel causing undesirable behavior for any model features that reference them. The current development cycle is focused around implementing a naming algorithm designed to mitigate this effect under most circumstances. However, be aware that TNP mitigation is not a replacement for good modeling practice and techniques.
Kernel OpenCascade
OpenCascade (OCC/OCCT) jest podstawową zewnętrzną zależnością jądra CAD, od której FreeCAD jest całkowicie zależny. Istnieje wiele otwartych błędów "upstream", które społeczność FreeCAD zidentyfikowała i śledzi w odniesieniu do OCC. Śledzimy je poprzez:
Odnośniki internetowe
- Dyskusja: FreeCAD nie jest gotowy na 1.0 (wątek na forum)
- Why the GIMP Team Obviously* Hates You (*We Actually Love You. **Mostly) Pat David z prezentacji zespołu GIMP na SCaLE16x California 2016 r.
- Earning Your Support Instead of Buying it: A How-to Guide to Open Source Assistance autorstwa Iana Turtona na FOSS4G Seul 2015