CAM: Ulepszenie - parkowanie narzędzia
Path DressupRampEntry |
Menu location |
---|
Path → Path Dressup → RampEntry Dressup |
Workbenches |
Path |
Default shortcut |
None |
Introduced in version |
- |
See also |
Path DressupTag, Path DressupDogbone, Path DressupDragKnife |
Description
The tool DressupRampEntry dresses up an existing path to add a ramp entry.
Usage
- Select a contour or profile path objects
- click the RampEntry Dress-up menu item
Properties
- Ramp Feed Rate : Can either be the current vertical or horizontal feed rate or some other custom value
- Angle : Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
- Method : Used to select different modes of ramping:
- RampMethod1 goes down at the ramp angle and the moves horizontal to the target point
- RampMethod2 goes horizontal first and then down at the ramp angle to the target point
- RampMethod3 goes down in a zigzag way
- Helix goes down spiraling
- Dressup Start Depth : The distance above the target level where ramping starts
- UseStartDepth : Indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.
From left to right: Ramp method 1, 2 and 3
Ramp method Helix
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework