Part Hélice
Part Hélice |
Emplacement du menu |
---|
Pièce → Créer des primitives... → Hélice |
Ateliers |
Part, OpenSCAD |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Part Primitives |
Description
Une Part Hélice est une forme paramétrique qui peut être créée avec la commande Part Primitives. Dans le système de coordonnées défini par sa propriété DonnéesPlacement, l'axe de l'hélice correspond à l'axe des Z et son point inférieur, le point de départ, se trouve sur l'axe des X.
Utilisation
See Part Primitives.
Example
A Part Helix object created with the scripting example below is shown here.
Options
Un usage courant de la primitive hélice est pour la Création de vis en conjonction avec un profil fermé et le Part Balayage opération. Ce processus fonctionne essentiellement de la même manière dans l'Atelier PartDesign en utilisant l'outil PartDesign Balayage additif.
Properties
See also: Property editor.
A Part Helix object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Coordinate System
- DonnéesLocal Coord (
Enumeration
): The handedness, or direction, of the helix:Right-handed
orLeft-handed
. The default isRight-handed
, meaning the helix turns counterclockwise as it goes up.
Helix
- DonnéesPitch (
Length
): The distance between two consecutive turns of the helix measured along its Z axis. The default is1mm
. - DonnéesHeight (
Length
): The height of the helix. The default is2mm
. - DonnéesRadius (
Length
): The start radius of the helix. The helix has a constant radius if DonnéesAngle is0°
. - DonnéesSegment Length (
QuantityConstraint
): The number of turns per helix subdivision. The default is1
, meaning each full turn of the helix is a separate segment. Use0
to suppress subdivision. - DonnéesAngle (
Angle
): The angle that defines of the outer shape of the helix. Valid range:-90° < value < 90°
. The default is0°
. If it is0°
the helix is cylindrical, else it is conical.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Helix can be created with the addObject()
method of the document:
helix = FreeCAD.ActiveDocument.addObject("Part::Helix", "myHelix")
- Where
"myHelix"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
helix = doc.addObject("Part::Helix", "myHelix")
helix.Pitch = 2
helix.Height = 3
helix.Radius = 4
helix.SegmentLength = 21
helix.Angle = 45
helix.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))
doc.recompute()
- Primitives : Box, Cylindre, Sphère, Cône, Tore, Tube, Primitives, Générateur de formes
- Création et modification des objets : Extrusion, Révolution, Miroir, Congé, Chanfrein, Créer une face, Surface réglée, Lissage, Balayage, Section, Coupes, Décalage 3D, Décalage 2D, Évidement, Projection sur surface, Ancrage
---
- Booléen : Créé un composé, Éclater le composé, Filtre composé, Opération booléenne, Soustraction, Union, Intersection, Connecter, Intégrer, Découper, Fragments booléens, Séparer/exploser, Scinder, OU exclusif
- Mesure : Mesure linéaire, Mesure Angulaire, Rafraîchir les mesures, Effacer toute mesure, Tout basculer, Mesures dans la 3D, Mesures selon le repère global
- Autre outils : Importation, Exportation, Sélection par zone, Forme à partir d'un maillage, Points à partir d'un maillage, Convertir en solide, Inverser les formes, Copie simple, Copie transformée, Copie d'un élément, Affiner la forme, Vérifier la géométrie, Supprimer la fonctionnalité, Apparence, Définir les couleurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test